REPAIR / REPLACEMENT OF ELECTRIC WIRING, LIGHT FITTINGS,AND ELECTRIC FANS IN DOMESTIC and TECH AREA INCL BD-I and II AT AF STN ADAMPUR

Amount

Point wiring with multi-stranded copper conductor, single core, FRLS PVC insulated and unsheathed cable, including FRLS PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 4 Sq. mm (nominal area) cable & 4 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4) complete all as directed.

Point wiring with multi-stranded copper conductor, single core, FRLS PVC insulated and unsheathed cable, including FRLS PVC insulated unsheathed stranded copper conductor single core cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes, base frame and cover plate of required module (suitable for modular swithes/sockets) comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Socket outlet three pin, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet three pin, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One socket outlet three pin, 6/16 Amp, independent, with 4 Sq. mm (nominal area) cable & 4 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4) complete all as directed.

Switch piano flush button single pole one way, 6 Amp complete all as specified.

Switch piano, bell/buzzer push, flush button single pole one way, 6 Amp complete all as specified.

Switch piano flush button single pole one way, 16 Amp complete all as specified.

Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified.

Socket outlet multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, flush type complete, all as specified.

Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified.

Lamp (angle) holder, insulated body, cord grip pattern, complete, all as specified.

Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified.

Fan regulator (electronic) suitable for 48”/56” sweep fan, step down type, single phase, complete all as specified.

Switch modular type single pole one way, 6 Amp, one module complete all as specified.

Bell push switch modular type single pole one way, 6 Amp, one module, complete all as specified.

Switch modular type single pole one way, 16 Amp, one module, complete all as specified.

Socket outlet modular multipurpose having provision for 2&3 pin, 6 Amp, two module, complete all as specified.

Socket outlet modular multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, two module, complete all as specified.

Fan regulator modular (electronic) suitable for 48”/56” sweep fan, step down type, two module, complete all as specified.

Sub main wiring (with approved colour coding as per IS) with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLS PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for the following: -

2 runs of 2.5 Sq. mm main cable + 1 run of 2.5 Sq. mm earth cable

2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable

2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable

NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE"

Rigid non metallic, PVC concealed conduit, 20 mm bore, medium grade, ISI marked, inclusive of all fitings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. for sub main wiring and the like complete all as specified.

ERW rigid conduit stove enamelled surface conduit including necessary conduit acessories like flame proof junction box(es), bend(s), reducer(s) and unions etc, ISI marked, all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. suitable for flame proof sub main wiring complete all as specified.

Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, complete all as specified comprising the following: -

SPN, 2 way with 200 Amp rated bus bar, 240 V, single door type

SPN, 4 way with 200 Amp rated bus bar, 240 V, double door type.

SPN, 8 way with 200 Amp rated bus bar, 240 V, double door type.

SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type.

TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type.

MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp complete all as specified.

MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 40 Amp complete all as specified.

MCB suitable for 415 volt AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 63 Amp complete all as specified.

Blanking plate to cover unused space in DB's complete all as specified..

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volt, breaking capacity not less than 10 kA, complete all as specified.

Earthing with and including GI earth plate electrode 6 mm thick of size 600 mm x 600 mm with 4 Sq. mm GI wire earthing lead complete all as shown in electrical plate No. 3 and specified in Particular Specifications clause 3.3.1 of contract, IN REPAIR. NOTE: (a) The unit rate includes earthing lead and protection pipe upto 7.5 metre from top of earth plate. (b) PCC pit shall be constructed at least 500 mm away from earth pit.

Surface mounted 10 watt LED downlight with white powder coated polycarbonate housing and pressure die-cast heat sink having high efficiency, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat Part No. LHEAAGP5PL1W010 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Envirnment friendly, energy saving surface mounted, decorative oval bulk head edge lit 10 watt bulk head LED luminaire, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat Part No. LHEOAOP7UZ6W010 or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED light fitting 20 watt wall /surface type including LED tube with driver complete suitable for roof/wall with electronic driver complete suitable body robust, corrosion resistant, superior finish. The system wattage of fitting should not be more than 20 watt ± 10%, surge protection of minimum 2 kV power factor should be more than 0.90 cool white colour, total harmonic distoration (THD) should not be more than 15 % lumen output should not be less than 90 lumens per watt, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin. MAKE: Havells Cat Part No. ENDURALINEARNEOBS20WLED865 SPCWH or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED 42 W recess mounting luminaire with high brightness SMD LEDs as light source, suitable for grid ceiling lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat Part No.LHEWEJP6PL1W042 or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED flood light fitting 100 watt complete diecast aluminium body, IP 65 protection, corrosion resistant, superior finish lumen output should not be less than 90 lumens per watt, total input voltage range 140 - 280 V AC, colour rendering index should not be less than 80, corelated colour should be minimum 6000 degree kelvin and making connection from junction box to connector block with provision of 1.5 Sq. mm PVC insulated unsheathed multistranded FRLS copper conductor cable complete. MAKE: Havells Cat Part No. LHEPCZU7PA6J100 or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED bulb 10 W fixed to lamp holder on directed locations complete.

Flame proof Point wiring with 1.5 Sqmm nominal area PVC insulated unsheathed multistranded copper conductor cable in and including ERW rigid conduit stove enamelled surface conduit for one light point / Fan point / 5 Amp multipurpose switch socket with and including necessary conduit acessories like flame proof junction box(es), bend(s), reducer(s) and unions etc, independent for one light point controlled by one (MCB) including 1.5 Sqmm nominal area PVC insulated unsheathed multistranded copper conductor cable for earth wire to common earth and connected to earth dolly complete all as specified.

LED flame proof tube light fitting 1x 20 watt including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes with minimum IP-65 protection. The system wattage of fitting should not be more than 20 watt ± 10%, surge protetion of minimum 2KV power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15%, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin suitable for Gas/vapur of IIA & IIB and Zone 1& 2 including connecting up with twin core twisted flexible copper conductor with suitable size complete all as per specified. MAKE: CROMPTON Cat No. EXTN1LT8-20 or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED flame proof tube light fitting 2x 20 watt including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes with minimum IP-65 protection. The system wattage of fitting should not be more than 20 watt ± 10%, surge protetion of minimum 2KV power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15%, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin suitable for Gas/vapur of IIA & IIB and Zone 1& 2 including connecting up with twin core twisted flexible copper conductor with suitable size complete all as per specified. MAKE: CROMPTON Cat No. EXTN2LT8-20 or equivalent in makes mentioned in Appendix 'B' here-in-after.

LED flame proof bulk head light fitting 20 watt including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through holes with minimum IP-65 protection. The system wattage of fitting should not be more than 20 watt ± 10%, surge protetion of minimum 2KV power factor should be more than 0.90, cool while colour, total hormonic distoration (THD) should not be more than 15%, total input voltage range 140-280V AC, colour rendering Index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin suitable for Gas/vapur of IIA & IIB and Zone 1& 2 including connecting up with twin core twisted flexible copper conductor with suitable size complete all as per specified.

Flame proof weather proof distribution board, IP-65 protection, LM-6 body, epoxy powder coated body complete suitable for and including the followings: - (i) MCB DP 32 Amp, 10 kA -01 No. (ii) MCB SP 10 Amp, 10 kA- 02 No. (iii) MCB SP 6 Amp, 10 kA - 04 No.

Flame proof weather proof rotary switch, single pole on & off with cable termination box in LM6, 16 Amp rating, 250 volt complete. MAKE: Sudhir Cat No. RI/OA/1010-2A or equivalent in makes mentioned in Appendix 'B' here-in-after.

Flame proof weather proof rotary switch-socket and plug combination in LM6, three pin (two pole earth) with cable termination enclosure box, 16-25 Amp rating, 250 volt complete. MAKE: Shyaam Switchgear Pvt Ltd. Cat No. SSPL/SS/1010 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Disconnecting & taking down of old serviceable flame proof light fitting of any description and refixing & reconnecting the same on original or any other location complete.

Disconnecting & taking down of old serviceable flame proof switche(s)/socket(s) of any description and refixing & reconnecting the same on original or any other location complete.

Collecton of items like ceiling fans, exhaust fans, wall mounted fans, cabin/table fans, flame proof ceiling fans from EM store yard for repair, transporting to workshop, opening and reassembling after including necessary cleaning greasing oiling etc, testing and depositing back to EM store yard of GE (AF) Adampur including necessary loading unloading and transporting etc. complete. NOTE: Supply only spares & rewinding of fan(s) shall be measured & paid for separately under respective items of BoQ.

Spray painting with synthetic enamel paint including preparation of surfaces including writing MES No. in black synthetic enamel paint as directed complete all as specified for the following: -

Ceiling fan 1200 mm sweep with blades

Ceiling fan 1400 mm sweep with blades

Exhaust fan 300 mm sweep with blades

Exhaust fan 450 mm sweep with blades

Wall mounted fan 650 mm sweep with blades

Cabin/table fan 450 mm sweep with blades

FPWP ceiling fan any sweep with blades

FPWP exhaust fan any sweep with blades

Rewinding fan of any description with super enamelled copper winding wire of size, gauge & weight as per original specifications providing insulating material and varnishing with synthetic varnish, oiling, greasing, to the entire satisfaction of Engineer-in-Charge including taking out burnt winding wire after opening the ceiling fan of size: -

Ceiling fan 1200 mm sweep

Ceiling fan 1400 mm sweep

Exhaust fan 300 mm sweep

Exhaust fan 450 mm sweep

Wall mounted fan 650 mm sweep

Cabin/table fan 450 mm sweep

Flame proof wether proof ceiling fan any sweep & description

Flame proof wether proof exhaust fan any sweep & description

NOTE: Collecton of fan items from EM store yard, transporting to workshop and back including loading unloading shall be measured & paid for separately under respective items of BoQ.

Supply only spares for fans IN RELACEMENT as under: -

Gun metal bush for ceiling fan 1200/1400 mm sweep complete.

Ball bearing suitable for ceiling fan 1200/1400 mm sweep, complete.

MS bright finished U clamp with nut, bolt, pins and washers suitable for ceiling fan 1200/1400 mm sweep, complete.

Synthetic rubber reel type bush with hole suitable for ceiling fan 1200/1400 mm sweep, complete.

Blades for ceiling fan 1200 mm sweep, as per existing specifications and shade, complete.

Blades for ceiling fan 1400 mm sweep, as per existing specifications and shade, complete.

Condenser capacity 2.5 MFD suitable for AC supply ceiling fan 1200/1400 mm sweep, complete.

Condenser capacity 3.15 MFD suitable for AC supply ceiling fan 1200/1400 mm sweep, complete.

Condenser capacity 4 MFD suitable for AC supply ceiling fan 1200/1400 mm sweep, complete.

Ball bearing suitable for exhaust fan 300 mm sweep, complete.

Ball bearing suitable for exhaust fan 400-450 mm sweep, complete.

PVC flexible Copper wire size 23/.0076 twin core, required length as directed, complete all as specified.

Ball bearing suitable for wall mounted fan upto 650 mm sweep, complete.

Ball bearing suitable for table/cabin fan upto 650 mm sweep, complete.

Blades for wall mounted/table/cabin fan upto 650 mm sweep, as per existing specifications and shade, complete.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified.

Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified.

Dismantling of unservisible existing DBs of any description with all accessories and MCBs, isolators etc. and making good surface as per existing, complete all as specified.

Taking down carefully light fitting of any description, complete all as specified.

Taking down carefully electric bell/buzzer of any description, complete all as specified.

PRATHAM TRADERS

MALHOTRA AND ASSOCIATES

R K ENTERPRISES