ADDN ALTN TO WH MSQ BLOCK NO XVI GF 08 QTRS AT DSSC WELLINGTON

Amount

Taking down chowkats or frames including shutters (without taking off shutters from the frames) not exceeding 1.50 Sqm each complete all as specified and as directed.

Taking down chowkats or frames including shutters (without taking off shutters from the frames) exceeding 1.50 Sqm and not exceeding 4 Sqm each, complete all as specified and as directed.

Dismantling of single layer mangalore pattern roofing tiles all as directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed

Dismantling wooden Battens for tiles, shingles etc, of any size including tilting fillets with spacing exc 15 cm complete

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in unframed work such as rafter,beam etc complete all as specified and as directed

Taking down cement or cement lime plaster of any description on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and as directed.

Demolition cement concrete(un reinforced) (below or above ground level) and removing debris off the site complete all as specified and as directed

Demolition for brickwork or stone masonry laid with cement mortar or cement lime mortar all as specified and directed

M&L for non skid ceramic tiles7 to 8 mm thick (square/rectangle) area of each tile exc 0.11sqm but not exc 0.18 sqm, in floors and scantling etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified

Dittoall as per item No 10 above but set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified

M&L for coloured glazed ceramic tiles of size 300x600x7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match as in vertical surfaces of dado/skirting set in 10mm thick CM 1:3 complete all as specified and as directed

S&F Pressed steel frames of 1mm thick factory made of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and taring back side of frame, complete all as specified and as directed.

M&L PCC type B-0 (1:2:4) using (12.5mm graded aggregate) as in filling of steel chowkats or frames complete all as specified and as directed.

Supply and fix Aluminium powder coated sliding window with appropriate frame section(with two or three track) including two or more window shutters with 5.5mm thick plain glass and including on or more gauged shutter including jointing cleat, glazing clips, rubber neoprene packing including necessary accessories like handles, hinges etc complete all as specified and as directed.

Supply and fix Aluminium powder coated openable/side hung ventilator with appropriate frame section including 4 to 5mm thick pin head or hatched glass with louvers design all as directed by the Engr In charge including provn of appropriate opening for fixing of exhaust fan and including with or without gauged shutter including jointing cleat, glazing clips, rubber neoprene packing including necessary accessories like handles, hinges etc complete all as specified and as directed.

S & F Aluminium grill with a pitch of 52mm to 80mm fixed partition with appropriate aluminium frame/ channel as per manufacturing and design including necessary drilling, cutting, fabrication etc complete all as specified and as directed.

Supply and fix UPVC door shutters with frames of approved make and section and colour with all necessary fixtures like hinges, handles, bolts etc all as specified and as directed

M&L for 2nd class hard wood (Sal / Hollock) factory made glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass or gauge,etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and as directed..

M&L for 35 mm thick flush shutter, solid core construction, with block board core and plywood face panels, commercial type on both sides including 6 mm thick lipping patty around the shutter complete all as specified and as directed.

S&F Stainless steel wire cloth0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and as directed.

S&F Mild steel butt hinges 100mm long, medium weight, cold rolled all as specified and as directed.

S&F 150mm, extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

S&F 150 mm long, Aluminium anodised barrel tower bolts, of extruded section complete as specified and as directed.

S&F 300mm long, Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete as specified and as directed.

M&L for preparation of new wooden surfaces over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix 18mm thick High Density High Moisture Resistant (HDHMR) Board, both side laminated of approved colour as in shutters, back board, vertical support and horizontal shelves of kitchen/bedroom cupboards fixed with screw to timber framed work etc., complete all as specified and as directed. Note: All exposed edges/surfaces to be finished with same laminated sheet to match with the other surfaces and nothing will be paid extra.

Supply and fix in repairs Stainless steel soft close hinge with 35mm cup dia, full overlay, 110 degree opening suitable for 18mm thick shutters complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix in repairs Gun metal handle of size 150mm for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

Supply and fix in repairs Magnetic closer of suitable size for kitchen/bedroom cupboards fixed with screws complete all as specified and as directed. MAKE: EBCO/ GODREJ / KAFF / HETTICH

M&L for anodised aluminium snap grid frame work of size 605x605 mm for false ceiling all as specified and as directed.

M&L for GI hangers for false ceiling grid 6 mm dia (up to 1200 mm length) adjusted level to fixed to roof slab by meands of ceiling clips made out of GI flat 40x30 mm size 60 mm long and expansion hold fasteners 12.5 mm dia 40 mm long complete all as specified and as directed.

M&L for Non asbestos fibre cement building boards 8 mm thick fixed to aluminium snap grid in ceilings fixed flat or slop complete all as specified and as directed

M&L 75mm thick Plain Cement Concrete type C-1, 1:4:8 (40mm graded stone aggregate) as in floors, incl finished even & rough to receive the top finish complete as specified and as directed.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface all as specified and as directed.

M&L 75mm thick Plain Cement Concrete type C-1, 1:3:6 (20mm graded stone aggregate) as in floors, plinth protection etc. finished even & fair without using extra cement complete as specified and as directed.

Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in drain / surface channel all as specified and as directed.

M&L for Precast cement concrete block Type C1(1:3:6)(using 20 mm graded aggregate) masonry with solid solid blocks exc 10cm width and setting in mortar(1:6) complete.

Material and labour for Rendering in Cement Mortar 1:6, 15mm thick on other than fair faces of brick work wall surfaces, finished even and smooth without using extra cement complete all as specified and as directed..

Rendering 15 mm thick on old unplastered stone masonry surface in CM 1:6 finished even and smooth with out using extra cement complete all as specified and as directed

Material and labour for providing plain cement concrete 1:3:6 type C2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete for manhole & Septic tank all as specified and as directed.

M & L for mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

M/L preparing new surface of steel and applying two coats of synthetic enamel paint over a coat of primer red oxide complete all as specified and as directed.

M&L for 75mm thick cement concrete type D2, 1:4:8 using 40mm graded aggregate as in subbase all as specified and as directed.

M&L for chequered cement concrete tiles of size 20cmx20cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick thick screed bed in CM (1:6) complete as specified and as directed.

S&F 15 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 20 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

S&F 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F Vitreous China wash down water closet pan (Pedestal pattern), white including connection to drain and to flushing pipe, and plastic water closet seat, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminium hinging device etc complete all as specified and as directed.

S&F Vitreous China wash basin, white, flat back, size 550x440mm excluding taps, waste, chain and plug and porcelain stopper but including brackets CP waste coupling (flat back or angle back type) any size and 32mm dia waste pipe, including cutting for and pinning in ends of brackets or erecting stand including waste pipe all as specified and as directed.

S&F PVC valveless, syphonic action type, flushing cistern, 10 Ltrs capacity low level, white, with inlet, ball valve, float and handle including brackets High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing in repairs all as specified and as directed.

Supply and fix in repairs Bib cock 15 mm bore, cast copper alloy, chromium plated, fancy type with flange and crutch or butterfly handle conforming to IS as per Cat No.CON-041 of Jaquar or T3534A1 of Parryware or specified makes, screwed down high pressure with fly nuts, screwed for iron pipes or for brass ferrule etc., complete all as specified and as directed.

S&F in repair health faucet Make:Cat No. E8342A1of Parryware /F160001 of Hindware/ ALD-CHR 565 of Jaquar including 1.2m long flexible tube and wall hook complete all as specified and as directed.

S&F in repair soap dish holder of Make: Cat No T6902A1 of Parryware/ F580004 of Hindware/ ACN 1131N of Jaguar or equivalent all as specified and as directed .

Supply and fix in repairs stainless steel tubular towel rack 600mm long without lower hangers but with three hooks, Chromium plated as per Cat No.ACN-1181FHS of Jaquar or T6008A1 of Parryware or of other specified makes fixed on walls complete all as specified and as directed .

Supply and fix in repairs corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per Cat No.ACN-1173 of Jaquar or T6010A1 of Parryware fixed on walls complete all as specified and as directed .

Supply and fix in repairs Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F in repairs, two piece type stainless steel gratings square or round 100 mm size complete all as specified and as directed..

S&F 5.50mm thick looking mirror of size 900x600mm mounted on 6mm thick Plywood backing or AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cupwashers/or chamfered glass from all sides fixed with steel screws all as specified and as directed.

S&F sink with drainage board made of stainless steel 1 mm thick for kitchen with plugs wachers and wastes incl bedding of cement mortor to dwarf wall or or fixing cantilever brackets and connecting to union to pipe overall size 915x460mm bowl size 410x330x110 mm mm complete all as specified and as directed

Supply and fix stainless steel plate racks made of stainless steel 0.80mm thick sheet standard size 24'x36x10" and design as approved by GE, complete all as specified and as directed. Make: Nirali/ Parryware as approved by GE.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bends any radious 110 mm bore provided with acess door all as specified and as directed..

S & F PVC (SWR) bends any radious 75mm bore provided with acess door all as specified and as directed..

S & F PVC (SWR)110mm bore branch piece single(single Y) equal or Unequal all as specified and as directed.

S & F PVC (SWR)75 mm bore branch piece single(single Y) equal or Unequal all as specified and as directed.

S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal with acess door all as specified and as directed.

S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal with access door

S & F PVC (SWR) vent cowl 110 mm bore with fixing arrangements all as specified and as directed..

Supply and Fix, 500 litres capacity Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, three layered (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) etc., complete all as specified and as directed.

M&L PVC (SWR) Gully traps 125/110 mm setting and jointing with solvent cement all as specified and as directed.

M&L PVC (SWR) Floor traps 75 mm plain with grating including jointing with solvent cement all as specified and as directed.

M&L PVC (SWR) Multi Floor traps 75 mmplain with grating including jointing with solvent cement all as specified and as directed.

Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platforms, over head water tank plotforms etc for even and smooth finish all as specified and as directed.

M&L for RCC Type B1-1:2:4 (using 20mm graded aggregate) as in slab supproted on walls, beam and columns in floor, roof/cooking platforms etc all as specified and as directed.

Supply only liquid water proofing compound of approved make complete all as specified and as directed.

Supply and fix 50 mm bore Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/sqcm in any length with rubber ring joint complete all as specified and as directed.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete as specified and as directed.

S&F prepainted Galvalume Aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550MPA as in roof covering /cladding to wall,crimp curved where necessary fixed with self tapping screws complete all as specified and as directed

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws as specified and directed.

M & L for PCC (1:3:6) type C-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Complete removal of existing treatment on external walls by wire brushing, crack filling & Bio-wash to fight microbial growth and applying exterior wall putty of 3mm thick for smoothness, one coat of exterior wall primer and two coats of Exterior Emulsion anti fungal weather proof paint APEX ULTIMA OF Asian Paint or WEATHER COAT SMOOTH of Berger complete all as per manufacturer instruction as directed. NOTE: The painting work to be executed by authorised applicator of the manufacturer

M&L Preparation newly plastered surfaces of internal walls and applying two coats of Oil Bound distemper over a coat of chalkwhitning primer on plastered surface complete all as specified and as directed.

M&L preparation of newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed

Material and labour for Aluminium designer powder coated decorative curtain rods (Drapery rods) 20mm dia, exterior grade 3mm thick with and including side caps, holding clamps and 'F' and 'L' brackets, fixed to wall with PVC rawl plug and brass screws etc., complete all as specified and as directed.

M&L for framed work such as grills, gratings,flat iron for fencing post etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for framed work such as gates, doors of angle or other sections with gusset plates, rails braceses etc complete drilled for fixing of steel sheetings or other covering. Doors etc to be prepared for hanging or sliding with or including eaither hooks or hinges or steel hanging dooe fittings (exclusive of steel sheeting or other covering running rails and guids) and hanging also fastening and fixing confirming to Fe 290 gde E-165 complete all as specified and as directed

Excavating in trenches (including demolition of PCC below ground level )not exceeding 1.50 mtr wide and not exceeding 1.50 mtr in depth for foundation etc and getting out in hard /dense soil all as specified and as directed.

Material and labour for providing plain cement concrete 1:4:8 type D2, using( 40mm graded stone aggregate )as in foundation filling and mass concrete all as specified and as directed.

Returning filling including spreading levelling watering and well ramming in layers not exc 25 cm hard and dense soil

Removing excavated material not exc 50M and depositing where directed (Soils) at a level not exc.1.5 mtr above the starting point

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.. complete all as specified and as directed.

a) One light/fan/call bell point controlled by one switch

b) One 5 amps 5 Pin socket outlet on independent board

All as per Item No-2 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm 3 pin socket outlet, 16 amps, independent complete all as specified and as directed.

S&F Modular type socket out let 2/3 pin, 6/16 Amps, 2 module all as specified and as directed.

S&F Modular type Socket outlet 6 Amps 2/3 Pin, 2 module complete all as specified and as directed.

S&F Modular type switch single pole 16 Amps one way, 1 module all as specified and as directed

S&F Modular type switch single pole 6 Amps, 1 module, one way all as specified and as directed.

S&F Modular type Bell switch single pole 6 Amps one way, one module all as specified and as directed.

S&F Call Bell, AC, ding dong type 230 Volt complete all as specified and as directed.

S&F ceiling rose surface mount PVC/Polycarbonate, isolated body with face bakelite two/three terminals complete all as specified and as directed.

S&F modular white cover plate with frame, 3 module complete all as specified and as directed.

S&F modular white cover plate with frame, 6 module complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC , (4 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No: LUMILINEPLUSPROBS20WLED865SPCSSIND

Supply and fixing LED lights fitting 1x 10W, 220V, AC , (2 ft.) High performance electronic driver , operating temperature 10° C to 35 °C operating voltage range 140 V -270 V , Average life 50000 hours and LED lamp including High efficiency long life LED with lumen efficacy of 140 lm/watts and ABS end caps tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make Havells cat part No: LUMILINEPLUSPROBS10WLED865SPCSSIND

Supply and fix in repair MCB DB SPN 8 way 230 volts, double door type with minimum capacity of 200 Amps rated bus bar, sunken to wall including necessary dummy plate and necessary civil works and including taking down the unsv DB's of any size all as specified and as directed.

S&F Miniature circuit Breakers, SP,C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 kA all as specified and dircted.

S&F Miniature circuit Breakers, SPN of capacity 6-32 Amps,C-Series 240 Volts with breaking capacity 10 kA all as specified and dircted.

S & F exhaust fan of sweep 250mm made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding including taking down old unsv ex fan complete all as specified and as directed.

Material and Labour for Submain wiring with 2 runs of FRLS grade PVC copper conductor cable 4 sqmm, multistanded along with FRLS grade PVC insulated copper earth continuity conductor 4 Sqmm drawn through and including PVC Conduit pipe 20 mm dia with all fittings including taking down old unsv submain wiring complete all as specified and as directed. Note: The cost for concealed submain wiring is deemed to be inclusive of cutting chases in stone masonary wall/roof and making good.

KRA Engineering and Construction (BID ID -3476287)

GUNASEKARAN AND CO (BID ID -3475512)

AR Mohamed Yakub and Co (BID ID -3476021)

sree devi construction (BID ID -3474451)

ACE PROMOTERS (BID ID -3476421)

PM CONSTRUCTION (BID ID -3476304)

VVM CONSTRUCTIONS (BID ID -3476006)

m/s prabakaran (BID ID -3475571)