Rajasthan

Technical BO

Works

Civil Works - Water Works

Work of Water Supply Scheme for Augmentation of UWSS Chhabra under District Baran including 05 years O and M after 01 year Defect Liability period under AMRUT 2.0

PHED-Chief Engineer(HQ),Jaipur

Chhabra District Baran | Baran, Rajasthan

Amount: ₹10.5 CrCloses: 10 Aug 202629 Jul 2026Closed

Timeline

Published9 Jul 2026
Closed10 Aug 2026
Technical Evaluation11 Aug 2026
Award—

Bids

4 Bids11 Aug 2026

#	Company	Status
1	HRG INFRA Admitted-Fee/PreQual/Technical	Admitted-Fee/PreQual/Technical
2	M/S gulab chand kumawat Admitted-Fee/PreQual/Technical	Admitted-Fee/PreQual/Technical
3	M/S SACHIN CONST. Admitted-Fee/PreQual/Technical	Admitted-Fee/PreQual/Technical
4	M/s SURENDER KUMAR BANSAL Admitted-Fee/PreQual/Technical	Admitted-Fee/PreQual/Technical

Corrigenda

Corrigendum

1 updatesLatest on 28 Jul 2026Submission Ends:29 Jul 202610 Aug 2026

Date changes

Download Ends29 Jul 202610 Aug 2026Submission Ends29 Jul 202610 Aug 2026Bid Opening30 Jul 202611 Aug 2026

Tender Value

₹10.5 Cr

EMD Value

₹21.0 L

Closing Date

10 Aug 2026, 6:00 pmClosed

Tender Inviting Organisation

Name

Additional Chief Engineer

Address

ACE PHED Region Kota

Work Description

Work of Water Supply Scheme for Augmentation of UWSS Chhabra under District Baran including 05 years O and M after 01 year Defect Liability period under AMRUT 2.0

Tender Information

Tender ID

2026_PHCJA_573997_1

Reference Number

04/2026-27

Tender Type

Open Tender

Product Category

Civil Works - Water Works

Form of Contract

Percentage

Location

Chhabra District Baran

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

2 documents required · 2 mandatory

Fee/PreQual/Technical

RequiredTender Documents (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

Tender Fee Amount

₹10,000

Tender Fee Payable To

Executive Engineer PHED Division Chhabra

EMD Fee Amount

₹21.0 L

EMD Fee Exemption Allowed

Yes

Pre-Bid Meeting

Meeting Place

ACE PHED Region Kota

Important Dates

Last Activity

11 Aug 2026

Published

9 Jul 2026

Bid Opening

11 Aug 2026

Download Starts

9 Jul 2026

Download Ends

10 Aug 2026

Submission Starts

9 Jul 2026

Pre-Bid Meeting

17 Jul 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (139 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
1.01	100 mm	-	Rmt.	1,464	-
2.01	150 mm	-	Rmt.	2,082	-
3.01	200 mm	-	Rmt.	2,554	-
4.01	250 mm	-	Rmt.	3,307	-
5.01	300 mm	-	Rmt.	4,221	-
6.01	Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.	-	-	-	-
7.01	MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)	-	kg	126	-
8.01	Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.	-	-	-	-
9.01	For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.	-	Each	1,658	-

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Technical Bid Opening

tech_bid_open.pdf

PDF

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 1.02 MB

Work Item Documents

TD04.pdf

Tender Documents • 18.48 MB

BOQ_1021042.xls

BOQ • 0.36 MB

Corrigendum Documents

Corri01.pdf

PDF • 0.25 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

HRG INFRA

Admitted-Fee/PreQual/Technical

M/S gulab chand kumawat

Admitted-Fee/PreQual/Technical

M/S SACHIN CONST.

Admitted-Fee/PreQual/Technical

M/s SURENDER KUMAR BANSAL

Admitted-Fee/PreQual/Technical

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.
1.01	100 mm	-	Rmt.	1,464	-
2.01	150 mm	-	Rmt.	2,082	-
3.01	200 mm	-	Rmt.	2,554	-
4.01	250 mm	-	Rmt.	3,307	-
5.01	300 mm	-	Rmt.	4,221	-
6.01	Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.	-	-	-	-
7.01	MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)	-	kg	126	-
8.01	Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.	-	-	-	-
9.01	For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.	-	Each	1,658	-

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

1Providing, lowering, laying in trenches, aligning, fixing in position and jointing Ductile Iron (DI) ISI marked K-7 grade S&S pipes as per IS:8329-2000 (amended up to date), with internal cement mortar lining suitable for potable water with rubber ring (EPDM) joints as per IS: 5382-1985 including all taxes (Central and local), transportation and freight charges, inspection charges, loading/ unloading charges, including cost of labour and material, specials (Tee, bend etc.) satisfactory hydraulic testing, disinfection, commissioning etc. complete as per technical specifications and direction of Engineer-in-charge. (excluding earth work) Note : Providing and fixing of all requisite specials as per drawing, design and layout are inclusive in RM measurement of the item and shall not be paid separately.

1.01

100 mm

Rmt.

1,464

2.01

150 mm

Rmt.

2,082

3.01

200 mm

Rmt.

2,554

4.01

250 mm

Rmt.

3,307

5.01

300 mm

Rmt.

4,221

6.01

Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.

7.01

MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet)

126

8.01

Providing Household Tap Connection as per technical specification and approved drawing as per relevant IS code (amended up to date) from uPVC/DI/AC/MS/GI pipe line up to consumer meter/premises by using PP/MS saddle piece (Complete job).This job includes digging out suitable size of pits and trench for laying service line in all kinds of soil (excluding road); depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including MS/PP saddle piece, gunmetal ferrule 4.0 mm , GM Full-way Valve (IS:778 Mark) or ball valve (min. weight 165 gm) and specials, below ground level 20 mm nominal dia MDPE pipe PE 80 PN 16 as per ISO 4427 / 20 mm nominal dia PPR-C (Three layered) pipe PN16 SDR 7.4 (IS:15801:2008) (ISI mark) and above ground level using 20 mm dia PPR-C pipe with standard PPR fittings/ 15 mm dia GI pipe with fittings in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . The service line should be laid at least 45 cm below ground level. Note: Road cut and restoration is not part of this item and paid separately.

9.01

For connection with 20 mm dia MDPE/PPR-C pipe length up to 05 mtr.

Each

1,658