Construction of Multipurpose Community Hall at Muthi W.No 67

Amount

Engagement of labour for general site clearance including leveling of ground ,brush cutting including disposal of mulba complete job.

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

RBM filling including Ramming, Rolling and consolidation etc. (complete job).

Filling with available excavated and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15 cm), with intermediate layer of compacted earth (Soil density of 98%) after every four layers of compacted depth of fly ash, sides & top layer of filling shall be done with earth having total minimum compacted thickness 30 cm or as decided by Engineer -in-charge, including compacting each layer by rolling/ ramming and watering, all complete as per drawing and direction of Engineer -in - charge

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form work for: Foundations, footings, bases for columns

Centering and shuttering including strutting, propping etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platforms

Centering and shuttering including strutting, propping etc. and removal of form for: Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for: Columns, pillars, piers, abutments, posts and struts.

Edges of slabs and breaks in floors and walls Under 20 cm wide

Centering and shuttering including strutting, propping etc. and removal of form for:Weather shades, chajjas, corbels etc. including edges

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Cold twisted bars. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five leve

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in :Cement mortar 1:4 ( 1 cement : 4 coarse sand)

Half brick masonry in foundations and plinth : Cement mortar 1:3 ( 1 cement : 3 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level

12mm Cement plaster of mix:1 : 6 ( 1 cement : 6 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand)

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

Providing and fixing of Alumininium Door, Windows and vintilaters panelled and glazed including Handle bar, Brass Lock etc and the allied items Complete job.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

Providing and fixing of Inaguration Plate of size 3'-0 x2'-6 of Granite Marble stone of Black colour with carving letters including Construction of pedestal in Bricks Mas.1:4 and all other Connected charge for the complete job as per the direction of Engineer Incharge.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Removal of Excavated mulba, dismantled unserviceable material from the site of work by MT/Animal transport or other wise including loading /unloading complete job.

Providing and fixing of ceiling fans of approved brand and manufacture with ISI marked as per the direction of Engineer - in- charge Complete Job

Providing and fitting of Electric Points Complete Job as per the direction of Engineer Incharge. Complete Job.

Providing and fixing Exhaust fans of approved brand and manufacture with ISI marked as per the direction of Engineer - in - charge Complete Job

Provision for design, Drawing and consultancy and bearing capacity of soil test charge complete job.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)(1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Carriage of material Sand and aggregate 20mm by MT avg.10KM

Carriage of Bricks by MT avg. 15KM

providing and fixing of 16sq mm PVC insulated Copper wire of approved brand and manufacture with ISI marked as per the direction of Engineer - in- charge

providind and fixing PVC pipe 110 mm as per the direction of Engineer - in - charge Complete Job

providind and fixing PVC P trap 110mm as per the direction of Engineer - in - charge Complete Job

Providing and fixing PTMT grating of approved quality and colour.25 mm nominal dia with 25mm waste hole

Providing and fixing wash basin with C.I bracket, 15 mm dia CP brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- white vitreous China wash basin size 550x400 mm with a 15 mm CP brass single hole basin mixer

Providing and fixing white vitreous China pedestal type Water closet (European type) with seat and lid,10 ltr low level white vitreous China flushing cistern and CP flush bend with fitting and CI bracket, 40mm flush make bend, overflow arrangement with special of standard make and mosquito proof coupling of of approved Municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: W.C. Pan with ISI marked white solid plastic seat and lid.

providing and fixing 15 mm nominal bore C.P brass long nose bib cock of approved quality conforming to ISI standards and weighing not less than 810 gms.

providing and fixing 15 mm nominal bore C.P brass long body bib cock of approved quality conforming to ISI standards and weighing not less than 690 gms

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:20 mm dia. nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.:15 mm dia. nominal bore

providing and fixing of PTMT Towel rail complete with barckets fixed to wooden cleats with CP brass screws with consealed fitting arrangement of approved quality and colour 450mm long towel rail with total lengh of 495mm,78mm wide and effective hieght of 88mm,weighing not less than 170gm.

Providing of fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete : flexible pipe 40 mm dia

Providing and fixing uplasticized PVC connection pipe with brass unions 20 mm nominal bore

Providing and fixing white vitreous China flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with with automatic flushing cistern with standard flush pipe and C.P brass spreaders with brass unions and G.I clamps complete,including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 liter white P.V.C automatic flushing cistern.complete job.

providing and fixing PTMT soap dish case of approved brand as per the direction of Engineer incharge complete job

providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden clats with C.P brass screws and washers complete job.

Providing and fixing PTMT urinal cock of approved quality and colour: 15 mm nominal bore,80 mm long ,42 mm high and 30 mm wide with BSP female threads weighing not less than 48 gms.

Providing and fixing ball bearing for rolling shutters

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

providing and fitting of electric motor of 1 HP water pump /motor of make ISI marked,including fitting complete job as per the direction of Engineer incharge complete job

Providing and fixing PVC Bend 110mm as per the direction of Engineer incharge complete job

Ashok Kumar Gupta