Special repair to pipe lines and allied works under GE Utilities Udhampur

Amount

Supply, installation, testing and commissioning of horizontal centrifugal multi stage pump set of capacity 75HP with bronze impeller casing CI capable to handle raw water/clear water having 29 LPS at effective head of 110 MTR minimum 80% effieciency coupled to driver rating 75HP, 1440RPM motor as per manufacturer design with all standard fixing coupled through flexible coupling to be connected with suction and delivery lines, including 01 nos pressure gauge (ISI marked) on delivery side with common base frame of CI/MS variable, suitable for 3 phase 50Hz, 440 volt energy efficient variable voltage and variable frequency complete all as specified and directed by Engr-in-charge. Make: Kirloskar or equivalent model of Mather & platt/CG

Construction of PCC plateform of 1:2:4 type B-1 over 75 mm thick 1:4:8 type D-2 for foundation of pump with motor of capacity 75 HP having the height of 30 cm above GL and 30 cm below ground, consisting at platform of size 1.8x1.8x0.6M including grouting nuts and bolts of dia 16 mm and 65 cm long suitable suitable for pump set and motor complete including excavation, reterning filling, removal necessary form work & 15 mm thick cement plaster in cm 1:4 complete all as specified and directed by Engr-in-charge.

M&L for PVC insulated copper cable 1100 volts grade of size 120 sqmm single core to connect from starter to motor complete all as specified and directed by Engr-in-charge.

S&F in replacement of Fully automatic star delta motor starter in sheet steel enclosure type MN 65 with single phase protection feature motor rating AC 3 phase 415 volts, 50 Hz for motor of capacity 75 HP as per cat part No IHPASDYF* including taking down the old existing starter complete all as specified and directed by Engr-in-charge. Make: Havells/L&T/IndoAsian

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m deep for laying of cables, pipes foundations of poles/stays/pipes etc .not exc 10 Sqm area on plan and getting out in soft/loose soil complete all as specified and directed by Engr-in-charge.

Removing of excavated soil to a distance n. exc. 50 mtr and deposited where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed by Engr-in-charge.

Returning, filling in excavated soil in trenches including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick complete all as specified and directed by Engr-in-charge.

Taking up or down cast iron water mains Pipe 150 mm bore (including all fittings), with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and directed by Engr-in-charge.

Taking up or down G.I. tubing 50 mm bore and connection including cleaning for reuse and removing from site complete all as specified and directed by Engr-in-charge. Note: - Earth work will be measured and paid separately.

Taking up or down G.I. tubing 20 mm bore and connection including cleaning for reuse and removing from site complete all as specified and directed by Engr-in-charge. Note: - Earth work will be measured and paid separately.

Refixing old GI tubing obtained from Item No. 09 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of size 50 mm bore complete including main/branch connections complete all as specified and directed by Engr-in-charge.

Refixing old GI tubing obtained from Item No. 10 above and connections in new or old position (walls, trenches, ceiling and floors etc.) of size 20 mm bore complete including main/branch connections complete all as specified and directed by Engr-in-charge.

Supply and laying of cast iron pipes of 150 mm bore with spigot and socketed ends centrifugally cast, class 'LA' in any length laid in trenches complete including main/branch connections complete all as specified and directed by Engr-in-charge.

Supply and lay in trenches pipe galvanized, “Medium class”, 50 mm dia including fittings, main/branch connections complete all as specified and directed by Engr-in-charge.

Supply and lay in trenches pipe galvanized, “Medium class”, 20 mm dia including fittings, main/branch connections complete all as specified and directed by Engr-in-charge.

S&F Gun metal, globe or gate valves , with iron wheel head, screwed both ends for iron pipe and fixed of size 50 mm bore complete all as specified and directed by Engr-in-charge. Make: Kirloskar/zoloto/Leader/L&T

Description all as per serial item No 16.00 here-in-before but size of 20 mm bore complete all as specified and directed by Engr-in-charge.

S&F cast iron double end flanged and drilled sluice valve, PN 1.6, screwed rising type, ISI marked, with CI hand wheel and brass spindle including necessary GI bolts, nuts and washers and rubber insertion sheet for the 150mm bores complete all as specified and directed by Engr-in-charge. Make: Kirloskar/Zoloto/Leader

S&F Bends tapers in replacement any type, (straight, bend, increasing, decreasing or double socket etc). Tee pieces single branch "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs of CI fittings upto 150 mm bore complete all as specified and directed by Engr-in-charge.

M&L for cutting of existing road for crossing of MS/DI/CI/GI Pipes for laying of any size Pipes including necessary excavation and earth work including repairing the same as per existing with pre mix bituminous carpet, Width of trench shall be 0.45m & depth shall be upto 1.5m complete all as specified and directed by Engr-in-charge.

BARU ENTERPRISES

MOHAN LAL AND SONS

ASIA BUILDER