GE/S(U)-27/2021-22 DAY TO DAY MAINT (PETTY REPAIR) AT NCSR 2 COY NCSR CMDC 10 EW BN 1 EW BDE 135 (I) FD WKSP 9 R AND O HELIPAD COLONY NSOI SPORTS COMPLEX 250 TRANSIT CAMP BIKRAM PARK AND TARAMOUNT UNDER AGE B/R-II GE (SOUTH) UDHAMPUR

Amount

Checking of joinery (wooden/steel) iron/ aluminium mongery, pelmet box, door springs etc requiring carpentry work and carrying out minor repairs such as tightening of screws/ nails, fixing glass panes, minor adjustment of joinery, door etc. including petty repairs material like screws/nails, plug etc. to make it functional complete all as specified and directed by Engr-In-Charge. Note : Any items required to be replaced shall be paid under respective items.

Mild steel, drapery rod cut to size 20 mm dia with holder/bracket, stops, rollers etc. in repair complete all as specified and directed by Engr-in-Charge.

Hacking out old broken glass panes (any thickness size, quality or description) from metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Taking down shutters of any description exceeding 1 square metre each and not exceeding 2 Sqm complete all as specified and directed.

Factory made, 2nd class hard wood (sal/ hollock), plain framed, panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the side of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, 35 mm thick complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc complete all as specified and directed.

2nd class hard wood (sal/hollock), glazed and skelton shutters 35mm thick open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing palin, chamfered or rounded, fitted with cut & mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section 8.24(a) supplied and fitted to chowkhats complete including fixing only iron mongery such as tower bolt, handle, hinges, aldrop bolt etc. complete all as specified and directed.

Taking down chowkhat or frames with shutters (without taking off shutters from the frames) not exceeding 1.5 Sqm each including cutting holes for taking out hold fasts, dismentaling brick work (holes cut and any other damages to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost) complete all as specified and directed.

Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube and fixed in opening as per specification and drawing on page No. 150 MES SSR-2004 Part II and complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck in side with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & complete all as specified and directed.

Aluminum handles cast type, anodised, 150 mm size in repair complete all as specified and directed.

Aluminum anodised barrel tower bolts of extruded section with 150 mm long bolt complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden/PVC door frame in repair complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 100 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel/wooden/PVC door frame complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 75 mm long, including fixing to pressed steel/wooden/PVC door frame in repair complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 50 mm long, including fixing to pressed steel door frame if required complete all as specified and directed.

Mild steel cold rolled butt hinges medium weight 50 mm long, including fixing to pressed steel/wooden/PVC door frame in repair complete all as specified and directed.

Rolled mild steel work of angle iron as in frames of doors & Cup Board etc. confirming to grade Fe 410-W (Gde E-250) quality 'A' in repair complete all as specified and directed.

Galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple complete all as specified and directed.

Galvanised mild steel wire cloth cut to size, 0.56 mm nominal dia wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple in repair complete all as specified and directed..

2nd class soft wood beads, straight (any size) for glazed or gauzed joinery, renewed, including miters etc. complete all as specified and directed.

MS helical door spring 300 mm size including roller and roller plate fixed to wooden or steel frames with welding etc. in repair complete all as specified and directed.

18/19 mm thick block boards, grade-2 quality, interior grade, commercial type, fixed with screws as in shelves and shutters of cup board exposed face fixed with 20 x 6 mm thick teak wood beading in repair complete all as specified and directed.

100 mm long aluminium anodised hasp and staple complete all as specified and directed.

100 mm long aluminium anodised hasp and staple as in repair complete all as specified and directed.

Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges brass, CP, fixed with rawl plugs in repair complete all as specified and directed.

200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt complete all as specified and directed.

200 mm long mild steel barrel tower bolts, stove enameled black, with bright bolt as in repair complete all as specified and directed.

Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Mild steel sliding door bolt plate type 250 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate as in repair complete all as specified and directed.

Mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

Mild steel sliding door bolt plate type 300 mm long stove enameled black with bright bolt not less 12 mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate as in repair complete all as specified and directed.

150 mm long mild steel pressed steel handle, oval type, stove enameled black complete all as specified and directed.

150 mm long mild steel pressed steel handle, oval type, stove enameled black in repair complete all as specified and directed.

3 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and directed.

4 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.5 sqm in each pane complete all as specified and directed.

2nd class hard wood small fittings such as shaped door & window stops, cleat including all necessary labours, articles not exceeding 200 cubic centimeter each in repair complete all as specified and directed.

Checking and attending to water leakage from taps, flushing cisterns, wash hand basins and other sanitary fittings/fixtures and any obstruction to water supply, requiring plumber work and carryout minor repairs such as replacement of washers, check nuts, tightening of fittings of flushing cistern etc including petty materials like washers of all sizes, thread (shoot), M-seal, screws, nails to make water supply/plumbing lines functional and leak proof complete all as specified and directed by Engr-in-Charge. Note : Any items required to be replaced shall be paid under respective items.

Vitreous China wash basin, white, flat back, size 550 x 400 mm excluding tap, chain, plug but including for fixing of taps,waste fitting, brackets and cutting for and pinning in ends of brackets but fixed in repair complete all as specified and directed.

10 ltr capacity PVC low level flushing cistern symphonic action type white with inlet valve float and handle including brackets fixed in repairs complete all as specified and directed.

Sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and waste pipe including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm in repair complete all as specified and directed.

Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe of bore 15 mm in repair complete all as specified and directed.

Stop valve, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions of 15 mm bore in repair complete all as specified and directed.

PVC connection 15 mm size with PTMT nuts of length 450 mm in repair complete all as specified and directed.

Supply only waste fittings brass chromium plated for glazed ware sink, basins etc with long screwed shank and fly nuts, flenges end bedded in red lead cement and other end fixed 32 mm dia complete all as specified and directed.

Waste fittings brass chromium plated for glazed ware sink, basins,etc with long screwed shank and fly nuts, flenges end bedded in red lead cement and other end fixed 32 mm dia in repair complete all as specified and directed.

Stainless steel grating doom 75 mm/100 mm square/round in repair complete all as specified and directed.

32/40 mm dia PVC waste pipe for WHB/sink in repair complete all as specified and directed.

Flush pipe of polyethylene of low or high density or PVC, 32 mm dia, for low level cistern in repair complete all as specified and directed.

Taking up or down steel tubing with connections for cleaning for refixing or removing to storeyard complete of bore 15 mm complete all as specified and directed.

Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm complete all as specified and directed.

Fixing only Steel water tubing 15 mm dia medium grade galvanised with all fitting and fixed complete to wall and ceiling or laid in floors complete all as specified and directed.

Cleaning of blocked floor/nahani trap and CI pipe upto 1st Manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50 m and sealing the sides of traps in bath/kitchen using Aqua TS of 'Aquashield water proofing" or equivalent, any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of complete all as specified and directed by Engr-in-Charge.

Cast Iron floor trap with dia of outlet 75 mm with CI grating including jointing to waste pipe fixed in cement concrete PCC 1:2:4 type B-1 in repair complete all as specified and directed.

Cleaning of blocked WC trap and CI pipe up to 1st manhole and removing all silt, residue sludge both organic and inorganic nature including any type of foreign material and removing waste material sludge etc to a distance exceeding 50 m any damage caused during cleaning shall be made good by the contractor to the entire satisfaction of complete all as specified and directed by Engr-in-Charge.

Taking down eaves gutters and rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to Store (measured overall and fixed along the centre line over fittings and accessories) complete all as specified and directed.

110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

110 mm bore PVC (SWR) socket/bends/shoes any radius complete all as specified and directed.

Stack clamps made out of 50 mm by 5mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore complete all as specified and directed.

Vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including a provision of concrete bedding but fixed in repair complete all as specified and directed.

Supply only cast iron 'P' or 'S' trap for bore of pipe 100 mm complete all as specified and directed.

Bib Tap of PTMT (Make-Prayag) any colour 15 mm dia (Prayag or equivalent ) in repairs complete all as specified and directed.

Stop valve of PTMT (Make-Prayag) any colour screwed for iron pipe and fixed 15 mm bore in repair (Prayag or equivalent) complete all as specified and directed.

Ball valves of size 20 mm bore dia high pressure of PTMT (Make-Prayag) with epoxy coated aluminium rod and high density plastic ball (Minimum weight not less than 210 gms) screwed for iron pipe and fixed including necessary fitting as required at site in repair complete all as specified and directed by Engr-in-Charge

15 mm dia stopcock fancy type chromium plated concealed type in repair complete all as specified and directed.

Bib tap 15 mm bore fancy type chromium plated as in repair complete all as specified and directed.

Bib cock 15 mm bore long body chromium plated in repair complete all as specified and directed.

Brass chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union of bore 15 mm as in repairs complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floor and in paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

Providing 40 mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregates) as in floor and finished even and smooth without using extra cement complete all as specified and directed.

Providing 50 mm thick cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in plinth protection laid in alternate bays (not exceeding 2 Sqm each) and finished even and smooth without using extra cement and providing joints throughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed.

Cement concrete 1:2:4 type B-0 (using 12.50 mm graded crushed stone aggregates) as in cills, lintels, upto 1.50 metre clear span, copings, benching, bed plates etc. and in similar works including weathering, slightly rounded or chamfered angles and throating and necessary form works complete all as specified and directed.

Cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregates) as in surface channels and drains complete all as specified and directed.

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

15 mm thick rendering on fair faces of brick or stone/concrete surfaces in cement mortar 1:4 and finished surface even and smooth without using extra cement complete with water proofing compound complete all as specified and directed. (WPC shall be measured separtely)

15 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and directed.

5 mm thick rendering on fair faces of brick /concrete surfaces as in ceiling in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound as per latest IS specification complete all as specified and directed.

Demolition of cement concrete reinforced (reinforcement cut as required to facilitate demolition) as in beams, staircase, landing, chajjas and similar suspended work complete all as specified and directed.

Reinforced cement concrete 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slab such as roof slab, floor slab, landing and similar work not exceeding 200 mm thick surface horizontal or sloping, rough finished surface of concrete complete all as specified and directed.

TMT bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with Mild Steel wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

All as per ser item No 83 but 5 mm and over up to and including 10 mm dia in stirrups, spacers and binders complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and finished even and rough as backing coat of wall tiles complete all as specified and directed.

(300 mm x 200 mm) x 7 mm thick coloured glazed ceramic tiles as in skirting/dado set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete all as specified and directed.

Non skid coloured 7 to 8 mm thick ceramic tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and directed.

Random rubble masonry built in cement mortar 1:6, uncoursed, well bonded, bedded and solidly hearted complete all as specified and directed.

Description all as per ser item No 92 here in before but except stone complete all as specified and directed.

Flush pointing to stone rubble masonry, uncourse or brought up to courses built in CM 1:4 complete all as specified and directed.

Preparation of wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Applying two coat of oil bond distemper on walls after preparation of newly plastered surfaces complete all as specified and directed.

Applying three coats of white washing on ceiling including preparation of newly plastered surfaces complete all as specified and directed.

Applying two coats of cement base paint after preparation of newly plastered surfaces complete all as specified and directed.

Applying two coat of oil bond distemper on walls after preparation of old decorated plastered surfaces complete all as specified and directed.

Applying one coats of cement base paint after preparation of old plastered surfaces complete all as specified and directed.

Applying one coat of white wash on old decorated plastered surfaces of ceiling after preparation of surfaces complete all as specified and directed.

Preparation of old decorated wooden surfaces exceeding 10 cms width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of old painted steel and iron surfaces exceeding 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Applying one coat of white wash on old decorated plastered surfaces of walls after preparation of surfaces complete all as specified and directed.

Applying three coats of white washing on walls including preparation of newly plastered surfaces complete all as specified and directed.

Pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete, of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer in repair complete all as specified and directed.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladder; framed balusters; railing; frame work for water tanks and similar work confirming to Fe 410-0 or Fe 310-0 in repair complete all as specified and directed.

1 mm thik plate rack made of stainless steel, 600 x 750 x 250 mm (Weight not less than 7.5 Kg) including brackets and embedded in brick wall in repair complete all as specified and directed as per manufacturers instruction.

Vitreous china urinal half stall type of size 635 x 395 x 420 mm white excluding flushing cistern, flush pipe, but including 32 mm PVC flexible waste pipe including all fitting in required length in repair complete all as specified and directed. Make : CERA

Angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15 mm dia pipe in repair complete all as specified and directed. ISI marked. Make : Jaquar/CERA

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulaton boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

AC designer composite ceiling board 4 mm thick in 600 mm x 600 mm panel confirming to IS-14682 type-B category-3 including GI frame work with size of grid 605x605mm for seemless ceiling comprising of GI perimeter, holdfast & suspenders and all accessories complete all as specified and directed by Engr-in-Charge.

Dismantling asbestos cement (corrugated , semi corrugated etc) sheets as in roof covering complete all as specified and directed.

0.50 mm thick corrugated steel roof sheets prepainted galvalume having trough depth and fixing with self driven suitable GI screws complete all as specified and directed. Make :- JSW/CRIL (Colour roof India Ltd)/Unimet or its equivalent

6 mm thick asbestos cement corrugated sheet in roof with two corrugation side lap fixed with J or L hooks complete all as specified and directed.

Aluminum door closer (aluminum extruded section) hydraullically regulated, designation No 3, universal type, suitable for door shutters of 851 mm to 1000 in width and of weight 61 to 80 kg in repair complete all as specified and directed.

Hand shower (Helath faucet) with 8 mm dia, 1 metre long flexible tube and wall hook with NRV (Back flow preventor) in repair complete all as specified and directed. Make : Jaquar, Cat Part No ALD 577.

Dismantling water tanks and removing to store exceeding 250 and not exceeding 500 ltrs of capacity complete all as specified and directed.

Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified and directed.

Chequred cement concrete tiles 30 cm x 30 cm x 22 mm thick, set jointed and pointed in neat cement slurry mixed with gray cement to match over and including 15 mm thick cement screed in CM (1:6) in floor in repair complete all as specified and directed.

60 mm thick pressed precasting concrete interlocking tiles/paver blocks any shape & size and glosy finish top surface with Grey cement and pigement confirming to IS 15658-2006 of M-35 grade including laid over 40 mm thick sand cushioning with grey cement or mixed with pigment in repair complete all as specified and directed by Engr-in-Charge.

Cleaning and removing all scale and dirt etc. from tanks and from mouths of circulating pipes etc of 500 ltr capacity PVC water storage tank without dismantling the tank including writting the item "Tank Cleaning on ____" indicationg the date, month & year of cleanign on external wall of tanks walls with synthetic enamel paint complete all as specified and directed by Engr -in-Charge.

PVC tank lid for 500 to 1000 litre capacity including all locking arrangements, nuts, bolts etc for fixing in repair complete all as specified and directed by Engr-in-Charge

Glass self 600mm long including CP supporting clamps, screws etc. in repair complete all as specified and directed by Engr-in-Charge. Make : Jaquar Cat Part No AKP-35771P or equivalent as per specifed in PS.

Bathroom cabinet of size 600 x 600 mm, made out of bakelite sheet conisting of mirror on sliding shutter of approved make in repair complete all as specified and directed.

khajuria builders

M/S ASHOK KUMAR PACHIALA

SODHI TRADING CORPORATION

RAMAN CONSTRUCTION CO