Loading…
Loading…
Tender ID
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹2.8 LAWARDED | AWARDED |
Tender Value
₹4.0 L
EMD Value
₹9,900
Closing Date
13 Oct 2025, 10:00 pmClosed
Directorate of Municipal Administration
Construction of Parapet, platform in assembly hall and other works at TMC office (SFC UNTIED 2025-26)
DMA/2025-26/OW/WORK_INDENT49997
DMA/2025-26/OW/WORK_INDENT49997
Open
Other Works
Electronic Documents, First(One Cover)
DMA Town Municipal Council Mahaligpura
₹500
₹9,900
28 Sept 2025
28 Sept 2025
11 Oct 2025
Construction of Parapet, platform in assembly hall and other works at TMC office (SFC UNTIED 2025-26)
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-...
Removal of Unserviceable Soil with Disposal upto a suitable distance as directed by the Engineer incharge of work ( PWD SR 2022-23 Vol-3,P.No -17 I No - 3.1)
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, sc...
Providing and fixing plywood 4 mm thick, one side decorative veneer conforming to IS: 1328 (type-1), for plain lining / cladding with necessary screws, including priming coat on unexposed surface with...
Providing & fiing of 3track 2panel sliding windows made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2Titanium Dioide at 6PHR with TPEThermo Plastic Elastomer and lead...
Supplying split Air conditioners suitable for operation on AC supply single phase 50Hz230V with hermetically sealed compressorwithaircooledcondensermotorcapacitorandstartruncapacitorsrelayandoverloadp...
Installation charges for split type airconditioner with allied works for one indoor and one outdoor unit is to be mounted on suitable Angle Iron support upto 3.0 Ton split/cassette type A/C. (PWD Comm...
Providing and fiing factory made uPVC door frame made of uPVC etruded sections having an overall dimension as below tolerance 1mm with wall thickness 2.0 mm 0.2 mm corners of the door frame to be Joi...
Providingfiing of Openable door made out of multi chambered UPVCMatching to RAL9016 sections and with minimum TiO2TitaniumDioide at 6PHR with TPVThermo Plastic Vulcanized and lead free with gaskets gr...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) inished with a top layer 6 mm thick cement plaster with cement mor...
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer to give an even shade after thoroughly brooming the surface to remov...
Finishing walls with water proofing cement paint of required shade :New work (Two coats applied @ 4.84 kg/10 m²) to give an even shade after thoroughly brooming the surface to remove all dirt, dust, ...
Providing and fixing Steel work in built up tubular (round, square or
rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approv...
Providing & fixing corrugated G.S. sheet roofing including vertical /
curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G...
Plumbing and Sanitary work
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .