PROVN OF BITUMINOUS ROAD WITH PROTECTIVE WORK AND LED STREET LIGHT AT NEWLY ACQUIRED 25 ACRES LAND AT CGDHQ-8 AT HALDIA UNDER GE (I) (CGN) KOLKATA

Amount

Supplying and filling of approved silver sand obtained from outside MD land, including spreading and levelling in layers n.exc 25 cm thick including watering and rolling using with 8-10 tonne roller as required to obtained the desired dry density , inrquired shape and camber complete all as specified and as directed by Engineer-in-Charge. Note : Soil shall be obtained from the outside defence land defence land and quoted rate shall be inclusive of excavation, royaity, local tax, toll tax and transportation loading/ unloading all as applicable.

Rolling and consolidation formation surfaces in cutting with 8 to 12 tonne capacity power road roller complete all as specified and as directed

Material and labour for soling (sub base) 150 mm spread thickness with broken boulders or quarried stones ( granite, trap or basalt), interstices filled, surface formed and rolled and consolidated with power roller 8 to 12 tonne to required gradient and camber complete all as specified and as directed.

Material and labour for 150 mm thick (compacted thickness) WBM, in two layers of 75mm thk each (each layer to be rolled and cosolidated separately) with of granite, trap or basalt of grading 2 (63 to 45 mm size), spread, rolled and compacted to required gradient and camber with three wheel-power roller of 8 to 10 tonne capacity or an equivalent vibratory roller complete all as specified and as directed.

Material and labour for applying evenly a priming coat with bituminous primer (paving grade bitumen VG-10 grade) @ 10 kg per 10 sqm complete all as specified & as directed.

Material and labour for bituminous macadam not exceeding 75 mm thickness (compacted thickness) using hot mix plant and mechanical paver with 4% binder (paving grade bitumen VG-30 grade) content by weight of total mix, rolled and compacted with power roller 8 to 10 tonnes to required camber and gradient complete all as specified and as directed. Note :- (i) Bituminous macadam shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined as per IRC 27: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹55 per kg.

Material and labour for semi dense bituminous concrete 40 mm (compacted thickness) using graded crushed stone aggregate premixed with binder (paving grade bitumen VG-30 grade) @ 6% by weight of total mix & hydraulic lime filler, rolled and compacted to required camber and gradient complete all as specified and as directed. Note :- (i) Semi dense bituminous concrete shall be laid using self propelled hydrostatic paver finisher and preparation of mix shall be using hot mix plant and transporting the mix in tipper. (ii) The exact bitumen content required shall be determined following the Marshall Mix Design procedure contained in the Asphalt Institute Manual MS-2 (Sixth Edition) as referred in case 3.5.3 of IRC 111: 2009. The adjustment in rate due to variation in quantity of bitumen if any shall be priced at the rate of ₹55 per kg.

Material and labour for precast cement concrete solid block masonry of grade C(5.0) with cement concrete 1:2:4 Type B1, using 20 mm nominal size graded crushed stone aggregate exceeding 10 cm in width and set in cement mortar (1:4) complete all as specified and as directed.

Providing and applying 2.5 mm thick road marking strips (retro-reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi-automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T & P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete all as specified and as directed.

Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or water supply pipes lines etc or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.y.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed.

Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Supply and fix Hot dip Galvanized Octagonal street light Poles of 8 meter long, Top dia 70mm , bottom dia 130mm and sheet thickness 3mm including top bracket for light fitting complete with base frame plate, foundation bolt, nut and washers, top, complete all as specified and directed.

Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 4 core, nominal cross sectional area of main conductor 10 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.

Supply & spreading in trenches dry river sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.

Supply & laying unreinforced precast concrete cable cover class LV type 1, flat shape, dimension 250 mm X 150 mm X 40 mm as per IS 5820: 1970 complete all as specified and directed.

Material and labour for cement concrete in foundation, filling and mass concrete in 1:4:8, type D2, using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

Supplying & laying in trenches 40 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.

M & L for connection of street Light with two single core PVC insulated unsheathed , 1100 Volts grade, (FR-LSH) copper cable 2.5 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 1.5 sqmm copper conductor and connected to common earth dolly complete as directed. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.

Supply and fixing LED street light fitting 90 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply and fixed MCCB 63 Amp, 415 V, 4 pole, 16 KA complete all as specified and as directed..

Supply and fixed three pole power contactor, 415 Volts, MNX-12, conform to relevant IS, Range from 12-30 Amp AC-3, I Robust and suitable for hostile applications for street light control including electric connection complet all as specified and as directed..

Supply and fixed digital street light timer Crono 240 VAC base/Din mounting Digital type suitable for street light control complete all as specified and as directed.

KAKOLI ENTERPRISE

MAA KALI ENTERPRISE

HIGH HILLS INFRA

Sabitri Jhunu Enterprise