Const. of Flyover at Sheela Chowk on the intersanction of Delhi Hisar road with RKDB Road and const. of 4 lane bridge on JLN feeder and BSB canal on RKDB road in Rohtak City (Hr.) (Pdg. Street Light only on Flyover and on JLN Bridge and Approach Road

Amount

Wires and Cables

31.9 Supply and erection of PVC copper insulated and sheathed 2-core circular flexible wire

31.9 (i) d Size 1.50 sqmm ( 48 / 0.20mm).

31.9 (i) e Size 2.50 sqmm ( 80 / 0.20mm).

( c ) Moulded case Circuit breakers.

31.12 © Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections

31.12 c (ii) 15 amp.to 60 amp. 415 V ,10 KA 3-phase

31.12 c (ii) 100 amp.to 220 amp.415 V,10 KA 3-phase

(L) Miniature Circuit Breaker and Isolator

31.17 Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections

(a) Miniature circuit breakers of 9 KA breaking capacity

31.17 a (ii) SP MCB 6 Amp. to 32 Amp

31.22 (Q) Earthing

31.22(i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

31.22(ii) Extra for using salt and charcoal / coke for pipe earth electrode as required

31.22(xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required

31.22(xvi) Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required

31.26 Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections

31.26 (xI) Ard 16 Sq. mm 4 Core Cable

31.26 (xIi) Ard 25 Sq. mm 4 Core Cable

31.28 Supply and erection of suitable compression type brass cable glands for underground Cable

31.28 (ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core

31.33 Supply and erection of Godrej Almirah type M.S. pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current .

The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work:-

31.33 (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level

31.67 Supply and erection of mark double walled corrugated (DWC) HDPE pipe laid 1Mtr. Below ground level including diging and refilling of earth including cost of sutiable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

(ii) HDPE pipe 90/75 mm outer dia/inner dia

31.68 Supply and Erection of Hot Dip Galvanized octagonal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with natural links including connectin etc. with suitable connection arrangement for 2 No. MCBs/ Kit Kat including cost of R.C.C 1:1 5:3 for longitudinal MS reinforcement rods with rings of 8mm dia not more than 200mm C.C for fixing the pole eith all labour & material required to complete the jobin all respect upto the entire satisfaction of Engineer-in-Charge of the work.

(ii) 9 Mtr. Long pole with top dia 70mm and bottom dia 155 mm with base plate of size 260x260x16mm

M.R. items

N.S- 1 Supply and Erection of LED street light lumanaries of Havells make Endura PLEARL DLUSSL 60W LED or its equivalent make of Wipro make LR02-671-xxx-57-xx / Philips make BRP409LED 060CW / BRTFG 60 W LED Bajaj Bake (As per sanctioned estimate) with die cast housing, toughened glass IP66 with all acessories as supplied by the manufacturer with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work.

N.S- 2 Supply / Installation of street light fitting of Havells make ENDURA PEARL PLUSSL 90W LED / BRTFG 90 W LED Bajaj Bake (As per sanctioned estimate) or equivalent make of Philips BRB 410 LED 90 W / Wipro LR02 -102 90W LED with cast aluminium body & toughened glass including the cost of all accessories as supplied by the manufacturer including the cost of all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work

N.S - 3 Supply & erection of outdoor duly factory manufactured feeder panel to operate S/L system made out of C.R.C.A. sheet 2 mm thick of App. Size ( 1100 L x 1400 H x 300 D ) mm with hot type canopy ventilation slots ( box type ) angle iron / channel iron frame of 40 mm x 40 mm x 6 mm on both sides. The panel should have double door godrej Almirah type weather proof with locking arrangement. The panel as such be made in two compartments one for space of energy meter with glass & solid wire mesh and sealing arrangements. The second compartment to accommodate the complete control system. Both the compartment is to accommodate system of set of timer, Copper Bus bar of size 400 mm x 20 mm x 3 mm duly tinned & insulated. The panel duly painted in powder coated gray shade. The main pannel door fixed with rubber gasket of superior quality to make it water proof. The panel should be fixed on C.C. Block size 1300 mm x 500 mm x 250 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster having a C.C. base of size 1500 mm x 750 mm x 250 mm below ground level.

N.S - 4Supply and erection of 32/63 Amp. 3 Phase automatic time switch of L&T make alongwith contactor of required capacity of L&T make movement controlled by precisaty quartz osciliation operation on main supply of continue to run on built in rechargeable nickel cadium cell for 150 hours in the event of power failure including cost of contractor complete in all respect upto the entire satisfaction of Engineer-in-charge of the work.

N.S. - 5 Supply and erection of 40 Amp. 3 Phase AC Energy Meter in built C. T. 40/5 ( Approved by H.V.P.N on existing pole with clamps of required size including making necessary connections with petty material required to Complete the Job in all respect upto entire satisfaction of Engineer -in-Charge of the work

N.S. - 6 Supply and Erection of Single / Double Arm Bracket made of 50 mm Dia G.I Pipe 'B' Class 1.25 Mtr. Long with G.I Coller 0.50 Mtr. Long of Suitable Size to fit on Octogonal Pole with top Dia 70 mm including necessary Nut & Bolts etc. required for fixing of bracket on top of 9 Mtr. Long Octogonal Pole dully painted with Blue/ Red / Golden alluminium paint as per lumuniare with all labour and material required to complete the job in all respect upto the Entire Satisfaction of the Engineer-in-Charge of the work

(i) Single arm bracket

(i1) Double arm bracket

DEVENDER KUMAR CONTRACTOR

Highlight Associates and Contractors

Balraj Singh Contractor

KKM Engineering Solutions Pvt. Ltd.