Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.4 LAccepted-AOC 2 LOCKHART ROAD NEAR PCDA P OFFICE PRAYAGRAJ U P PIN 211014 | PRAYAGRAJ | UTTAR PRADESH | 211014 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹32.7 L+₹41,625 (1.29%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹33.9 L+₹1.6 L (4.89%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹34.2 L+₹1.9 L (5.76%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹38.4 L+₹6.1 L (18.9%)Rejected-Finance AT PO DERA COLLIERY TALCHER DIST ANGUL ODISHA PIN 759103 | ANUGUL | ODISHA | 759103 | L5 | Rejected-Finance Other than L1 |
Tender Value
₹50 L
EMD Value
₹1 L
Closing Date
19 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST PRAYAGRAJ
GE WEST PRAYAGRAJ PIN-211001
SPECIAL REPAIR TO CHITRAKOOT GUEST HOUSE AT PCDA (P) AND ROOF OF CERTAIN QTR AT AKBAR ROAD AT NEW CANTT PRAYAGRAJ
2023_MES_614439_1
8679/E8
Open Tender
Civil Works
Item Rate
180 days
GE WEST PRAYAGRAJ
As per Tender Documents
8 documents required · 8 mandatory
₹500
GE WEST PRAYAGRAJ
₹1 L
Yes
11 Nov 2023
18 Aug 2023
20 Sept 2023
18 Aug 2023
19 Sept 2023
7 Sept 2023
Amount
Demolition of brick wok built in cement mortar including all quoins,arches,pillars,etc but excluding ashlar facing, dressed stone work, precast concrete article complete all as specified
M & L Brick work with fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed
All as per srl item No 2 above but except old size sub class 'B' bricks complete all as specified and directed. (Note:- Old bricks retrieved from demolition shall be re-used)
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area not exceeding 1.5 sqm each complete all as specified and directed.
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) area exc.1.5 sqm each not exc. 4.00 sqm each complete all as specified and directed.
S & F Solid PVC moulded door frame of size 50mm x 47 mm made out of 5 mm thick single side prelam PVC sheet reinforced with MS square tube complete all as specified and directed.
S&F factory Made Solid PVC Moulded Door Shutters 28 to 30 mm thick with partical board core (stile:) with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC Sheet on the front Face & 2 mm Plain colour PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame complete all as specified and directed.
S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.
Dismantling of brick tiles or terracing tiles, single layer on roofs and disposal of demolished material upto a distance of 100 Mtr complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leaping ( whether full thickness removed or only a part thereof) complete all as specified and directed.
Removing demolished materials exceeding 500 mtr but not exceeding 1.5 Km and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed. Note: Demolished material should not be thrown away on the ground from the top of roof, it should be removed from the roof by manually or by any mechanical means
Removing of surplus excavated/demolished materials to a distance exc 50m away and depositing at the place where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified & directed.
M&L cutting crack to 'V' groove section in existing roof cleaning out wetting grouting with cement and sand slurry of 1:3 complete all as specified and directed.
M&L Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified all as specified
M&L for 40 mm thick PCC 1:2:4, type B0 using 12.5 mm graded stone aggregate as in roof kerbs / benching / coving and roof padding over roof surfaces etc rounded or chamfered on edges complete all as specified & directed.
M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.
Cleaning the dust, dirt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformly and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm i.e. overlap and 150mm end overlap, sealing all overlaps and bonded to the surface by fusing and bonding torch on method complete all as specified and directed. Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.
Supply only water proofing compound (ISI marked) complete all as specified and directed.
M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assessable roof area complete all as specified and directed.
All as per item No 19 but except tiles complete all as specified and directed. Note:- Tiles obtained from dismantling shall be used.
S&F Aluminium section powder coated of colour as approved operable sliding type three track window/ventilators with sliding shutter and frame with aluminium section of size including 5 mm thick tinted glass and mosquito proofing net as indicated below complete all as specified & directed (i) Frame section 62.3 mm X 44.45 mm X1.50 mm (ii) Shutter top bottom and side rails 44.45 mm X 44.45 mm X 1.50 mm (iii) Glass 5 mm thick one side reflective glass and other side visible of with rubber gasket with clips and hold fast 04 nos for each window including necessary handles, tower bolt etc. complete (iv) Aluminium grill 7.5 mm dia design no. DG - 102 make DEDO grill or design no AL - 103 make fixed to aluminium section 50X20X1.5 mm in existing opening. (v) stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.4mm fixed with tinted tacks or galvanized wire staples complete .
S&F 300mm long aluminum alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections suitable for use with pad lock complete all as specified and directed.
S&F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type B-21 complete as all specified and directed.
S&F 150mm long anodised aluminium handles, fabricated type complete all as specified and directed.
S&F 150 mm long anodised aluminium barrel tower bolt of extruded section complete all as specified and directed.
S&F of stainless steel wire cloth 0.91 mm nominal dia of wire and average width of aperture 1.40mm and size of mesh 12 mm fixed with stainless steel wire staples complete all as specified and directed
Dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M & L for 25 mm thick plain cement concrete 1:2:4, type B0 using 12.5 mm graded stone aggregate as in leveling course of floor and other similar works complete all as specified and directed
M&L for glazed ceramic coloured wall tiles in vertical surface 600 mm x 450 mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified and directed.
M&L joint free non skid, ceramic “coloured” digital tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.38 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick wall or stone wall etc including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed
M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed. (Note : The work to be carried out at the height of 12.0 M. Cost of scaffolding are included in the item. Contractor are deemed to quote the rate accordingly).
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement including mixing of WPC by weight of 2% of cement complete all as specified and directed. Note WPC will be measured and paid separately as supply only under respective item
M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed. (Note : The work to be carried out at the height of 6.0 M. Cost of scaffolding are included in the item. Contractor are deemed to quote the rate accordingly).
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 5 mm thick in CM 1:3 on ceiling of RCC or brick finished fair and even without using extra cement. complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Taking up or down 25 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F 25 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
Refixing old 15 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
Refixing old 20 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
Refixing old 25 mm bore GI steel tubing and connections in new or old position (Walls, ceiling, floors, etc.) complete all as specified and as directed
Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for and removal of debries out side MD land complete all as specified and directed.
S&F in repair rotational moulded, multilayer HDPE water storage tank (white colour three layer) of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed.
S&F in repair rotational moulded, multilayer HDPE water storage tank (white colour three layer) of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and directed.
S&F in repair Chrome Polished two way bib tap 15mm bore with wall flange, complete all as specified and directed. Make : Jaquar Cat part FLR-CHR-5041N or equivalent make as specified in PS.
S&F in repair S&F in repair CP Angle Valve with wall flange 15 mm bore complete all as specified and directed. Make : Jaquar Cat part OPP-CHR-15053PM or equivalent make as specified in PS.
S&F in repair brass wall mixer cock of Chrome Polished comfort height single-control operation which allows hot and cold or mix both complete all as specified and directed. Make -JAQUAR Cat Part No -FLR-CHR-5281N or equivalent make as specified in PS.
S&F Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed to WHB, for 15mm bore complete all as specified and directed. MAKE- JAQUAR cat part No. OPP-CHR-15001PM or equivalent make as specified in PS.
S&F in repair CP towel ring complete all as specified and directed. Make - JAQUAR Cat Part No - CAN-CHR-1121BN or equivalent make as specified in PS.
S&F CP towel rack with 3 nos hooks, 600mm long superior quality fancy type as approved by EIC complete all as specified and directed. JAQUAR Cat Part No - CAN-CHR-1121BN or equivalent make as specified in PS.
S&F in repair chrome Polished Towel Rod fixed to wall complete all as specified and directed. Make - JAQUAR Cat Part No - CAN-CHR-1111SM or equivalent make as specified in PS.
S&F in repair sheet glass corner bracket complete all as specified and directed. Make- Jaquar Cat Part No. CAN-CHR-1173 or equivalent make as specified in PS.
S&F in repairs C P bib cock long body half/quarter turn type including flange screwed down for iron pipe 15 mm bore complete all as specified and directed. Jaquar Cat Part No. CON-CHR-107KN or equivalent make as specified in PS.
S&F in repair wall mounted designer water closet complete all as specified and directed. Make: JAQUAR Cat No. ACS-WHT-87953BIUFSM or equivalent make as specified in PS.
S&F Chrome Polished Aqua Turbo 235 Silver concealed to wall for shower and spout complete all as specified and directed. Make -JAQUAR Cat Part No - JCS-WHT-2400 or equivalent make as specified in PS.
S&F in repair Health faucet with white side spray and metal hose complete all as specified and directed. Make - JAQUAR, Cat part No ALD-CHR-573 or equivalent make as specified in PS.
S&F in repair concealed CP stop cock with wall flange complete all as specified and directed. Make:- JAQUAR Cat part No - ALI-BCH-85083 or equivalent make as specified in PS.
S&F in repair Table top wash hand basin complete all as specified and directed.. Make: Hindware Italian Cat part No. 91094 or equivalent make as specified in PS.
M & L for 18 to 20 mm thick granite (of any type) work (table rubbed and polished) including the screed bed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.
Supply and fix/fabrication in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board plain sheet complete all as specified & directed .Make : Rajshree / Syntex, lifestyle
Supply and fix/fabricate in repair kitchen cabinet & wardrobe/ cupboard made out of 16 to 18 mm thick PVC board laminated sheet complete all as specified & directed. Make : Rajshree / Syntex, lifestyle
S & F 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
S&F 15mm bore with CP Bath Spout with wall flange and without Diverter complete all as specified and directed. Make - JAQUAR Cat Part No SPJ-CHR-85429 or equivalent make as specified in PS.
S&F in repair Chrome Polished 463mm wall mount shower arm complete all as specified and directed. Make JAQUAR, Cat Part No SHA-CHR-479L600 or equivalent make as specified in PS.
S&F in repair Chrome Polished 200mm square single flow rain head shower complete all as specified and directed. Make JAQUAR Cat Part No OHS-CHR-35497 or equivalent make as specified in PS.
S&F in repair 125 mm dia C.P grating with or without hole complete all as specified and directed.
S&F in repair chromium plated Toilet Paper Holder with cover (Silver) complete all as specified and directed. Make - JAQUAR Cat Part NO CAN-CHR-1153S or equivalent make as specified in PS.
S&F in repair chromium plated stainless Seal Connection pipe 600mm long premium quality for Gyser, WHB etc complete all as specified and directed.
S & F PVC float valve assembling for 25mm bore PTMT chromium plated complete all as specified and directed.
M & L for high density polyethylene (HDPE) pipes of 32mm dia pipes of pressure rating 6 kg per sqcm complete all as specified and directed.
S & F waste coupling of CP (half or full threaded) for WHB etc with long screwed shanks and fly nut complete all as specified and directed.
M&L for 100mm cast iron floor trap with grating incl jointing with solvent cement etc as fixing in repair complete all as specified and directed.
S&F in repair CP Bottle trap, plug type with wall flange complete all as specified and directed. Make - JAQUAR Cat Part No ALD-CHR-769L250X190 or equivalent make as specified in PS.
S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete Make: Jaguar Cat Part No.ACN-1131N or Equivalent make as specified in PS
M&L for Complete removal of existing treatment of wall and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed . Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for Complete removal of existing treatment of ceiling surface and applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper & applying two coats of Plastic Emulsion Paint white or tinted over one coat of primer complete all as specified and directed . Note: Scraping of old decorated surface to be done by mechanical sander with 1500-2700 rpm, with internal dust extraction system for clean environment, certified by paint manufacturer.
M&L for Complete removing of existing treatment by scrapping with Asian Paints TruCare Wall Sander: L- 01/H-01 (having mechanical vacuum mechanism) or equivalent having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour and one coat of acrylic water based exterior grade primer @0.9ltr(undiluted)/10 sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 litre per minute having a pressure of3300 PSI Allow 6-8 hrs to dry the surface for painting of subsequent quotes and applying water based premium acrylic smooth exterior emulsion of approved colour with silicon additive & Colour stay Technology ,Excellent Dirt Pick up Resistance of Asian Paints Ltd or its equivalent with low VOC less than 50 , Anti Algal properties in two coats@ 1.79 litre (undiluted)/ 10 sqm diluted with water in 5:2 ratio applied over priming coat with fully automatic airless spray machine of paint application of Asian Paints Trucare Graco or equivalent having an electric motor of min. 1 HP with a flow speed of min 1 litre per minute having a pressure of 3300 PSI. Allow 6-8 hrs to dry the surface in both the coats of paint with 5 years performance warranty from Manufacture and as per manufacturer's instructions complete all as directed.
M&L preparation of existing new plastered surfaces and applying two coat of Dr. fixit sure ceal damp proof chemical or Smartcare hydraulic water proofing of make Asian on plaster surfaces complete all as specified and as per manufacturer instructions.
S & F in repairs 110 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.
S & F in repairs 75 mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to wall or laid in trench or in floor complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
S & F in repair 75 mm bore PVC (SWR) bend any radius with access door complete all as specified and directed.
S & F 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
M&L for preparation of existing roof surfaces and roof treatment with reinforced elastomeric liquid waterproofing membrane of 400-micron thickness in four layer(100 micron each layer) having SRI of 1 30, tested as per ASTM E 1980 (with Solar Reflectance and Thermal emittance tested as per ASTM C 1549 and ASTM C 1371 , respectively). The coating should have water absorption less than 1% as per IS: 101 (P-7/Sec-1) 1989, with the ability to resist heat upto 120 00 as per IS: 101 (P-7/Sec-3) 1990 having volatile organic compounds less than 50 gm/litre as per ASTM D 3960 and should have excellent resistance to transmission of ponded water up to 2.5 bars of pressure for 7days. It should also be resistant to Ammonia solution, Sodium nitrate, Sodium hydroxide, along with water and soap solution as per IS: 101 (P-7/Sec-2)1990. The waterproofing membrane will be laminated with 25-40 micron thick transparent Nano modified composite crosslinking polymeric coating with a minimum of 40% solid content as per IS: 101 (P -8/Sec6)1993 and also should pass Impact test as per IS: 101 (P-5/Sec-3) 1988 along with having dust and water repellent & anti-graffiti property passing scratch hardness test of 500g as per IS: 101 (P-5/Sec-2) 1988. It should also pass Cross Cut Adhesion test as per IS: 101 (P-5/Sec-2) 1988. The Polymeric coating should have a self cleaning and easy-to-clean property with excellent weather stability and DPR (Dirt pickup ratio). Surface preparation includes pressure wash cleaning to remove all dust, fungus, etc. The work will be done under the supervision of the Engineer-in-charge by Graco airless machine. The coating thickness and the methodology of application shall strictly be carried out by the authorised vender/ manufacturers with all specifications and as approved by GE. (Make: Dr. fixit, Pidilite, Sika, Star shield) Note :- Roof treatment shall be carried out by the manufacturer in presence of the Engr-in-charge. The manufacturer shall give a guarantee for the performance & durability for 10 years. Tenderer is deemed to quote the rate accordingly.
S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms) complete all as specified & directed.
Taking down plaster from edges of RCC chajja or corners where steel reinforcement coming out and grouting with cement and filling the same with 15mm thick rendering in CM (1:3 ) and as per direction of Engr-in-Charge applying two coats of cement base paint over a coat of primer to match with the existing shade/colour of buildings complete all as specified and directed at site. (Note : The work to be carried upto two story height. Cost of scaffolding and its removal deemed to be included in quoted rate.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 Sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade surface conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all accessories and making good to disturbed surfaces complete all as specified and directed for the following :- Note:(a) Colour code of wire shall be strictly followed , Red for Phase , Black for neutral and green for earth wire (b) The unit rate quoted is deemed to be inclusive of cost of cutting chases in wall for providing concealed conduit and making good to match with existing finish/surface.
One light/fan/bell point controlled by one switch
One point for socket outlet 5 amps on independent board but not below the switch board in same vertical plane.
One point for socket outlet 5 amps on independent board but below the switch board in same vertical plane
One point for socket outlet 5 amp same board.
One light point controlled by two way switches.
All as per srl item No. 95 above but for one 3 pin socket outlet 15 amps, independent, with cables 2.5 sqmm size on independent board 1.5 Sqmm earth wire complete all as specified and directed.
S&F modular Switch piano flush type single pole one way 6 amps complete all as specified & directed.
S&F modular Switch piano flush type single pole two way 6 amps complete all as specified & directed.
S&F modular Switch piano flush type single pole one way 15 amps complete all as specified & directed.
S&F modular Socket out let 2 in one, 5/3 pin 5 Amp complete all as specified & directed
S&F modular socket 6 pin, 3 module 5/15 Amps flush type universal complete all as specified & directed.
S&F call bell, ding dong type, AC, 230 V, single pole complete all as specified & directed.
S&F bell push modular flush type 5 amp 230 volt complete all as specified & directed.
S&F fan regulator, modular type, 5 stepped, 80 W, single phase 230 volt including connection complete all as specified & directed.
S&F Modular cover plate with frame 2 module complete all as specified & directed
S&F Modular cover plate with frame 3 module complete all as specified & directed.
S&F Modular cover plate with frame 6 module complete all as specified & directed
S&F Modular cover plate with frame 8 module complete all as specified & directed.
S&F ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.
S & F in replacement for LED light fitting with box type ultra slim linear LED lighting fixture with co- extruded polycarbonate body environmental friendly, energy efficient tube light complete with all accessories internally pre- wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed.
S&F in replacement LED mirror light fitting 5 watt with high output with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size & suitable for mounting clamps PVC square box 75x75mm - 2 nos etc complete all as specified and directed.
S&F in replacement LED with 5 W decorative wall mounting twin leaf design fixture with elegant diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size complete all as specified.
S&F vertical /horizontal water heater storage type, electrically operated of capacity 25 litres, BEE 5 star rated ABS/ steel body and inner tank made with stainless steel duly thermal insulated with 2 KW heating element complete with and including vent pipe , fusible plug, safety valve, earth connector, PVC connections(hot and cold) and electric connection all as specified and directed. Make:- Havells (Cat Part No GHWAMGTWH025 , Crompton (Cat Part No.Matteo 25) , Bajaj (Cat part No. MAJ 25GL (New) as approved by GE.
M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable four single core of size 10.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories alongwith two run of PVC insulated unsheathed stranded copper conductor of size 10.0 Sqmm as earth continuity conductor for 8 way DB including taking down complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
M&L for concealed submain wiring using FRLSH PVC insulated, unsheathed stranded copper conductor cable two single core of size 4.0 Sqmm of voltage rating upto and including 1100 volts drawn in and including PVC concealed conduit of dia not less than 20 mm dia with all fittings and accessories alongwith one run of PVC insulated unsheathed stranded copper conductor of size 4.0 Sqmm as earth continuity conductor including taking down complete all as specified & directed. Note:- (i) Two runs of single core PVC cable with one run of earth conductor and conduit shall be measured as one length. (ii) The cost for cutting, chases required shall deemed to be included in the quoted unit rate.
M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. and connected to the earth point and testing complete all as specified and directed.
S&F , connecting & testing high lumen LED batten tube light of 10 watt 2 feet, having 2000/2100 lumen output with integral/ in built driver along with fixture with opal diffuser 230 V AC decorative type with driver holder and LED lamp including connecting with three core flexible copper conductor cable of suitable size in replacement complete all as specified & directed.
S&F RJ11 Telephone jack, modular type, single, with shutter, with pressed steel sunken box with top cover & base frame complete & directed. Make : Anchor Roma Cat No. 20857 or equivalent make as specified in P.S.
S&F TV Socket outlet, modular type, single, with pressed steel sunken box with top cover & base frame complete all as specified & directed. Make : Anchor Roma Cat No. 21157 or equivalent make as specified in P.S.
M&L rigid non metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc for external dia 25 mm complete all as specified & directed.
S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing complete all as specified and directed.
S&F ceiling fan with down rod, fan connector/ fan hook, 1200mm sweep, 240 V AC, Energy efficient, 5 star rating with 3 Blade and connecting up including provn of three core PVC insulated multi stranded flexible copper conductor cable of size 1.5 sqmm copper wire from ceiling rose to fan of length not less than 0.5 mtr. all as specified & directed.
S&F in replacement Ekinox³ TPN DB-VTPN DB 4 way DPX³ 160A MCCB Double door DB's As per IEC 61439-3, Suitable for Flush Mounting and Surface Mounting, With 250 A Copper Busbar for each phase, With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management, Fully insulated busbar & shrouded Neutral bars, Improved Pan assembly for ease of installation, Prefitted masking sheet, Reversible Door for IP 43 & IP 54 dB's, With provision for DPX³ 160 MCCB as incomer and SP/TP MCB's as outgoing [IP 4 -IK 09 with metal door complete all as specified and as directed. Make:L&T Cat no DBPSG004SD or equivalent in Legrand / ABB / Havells
S&F in replacement sheet metal enclosure for MCB's 415 volt 12 way single pole and neutral with 200 amps rated busbar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F in replacement of worn out control switch with MCCB Triple pole, Type- DU 100H having thermal release range 160 Amps, Breaking capacity-30 KA at 415 VAC, 50 Hz conforming to IS 13947 (p-2) with extended/spreader terminal (set of six) including making electrical cable connections with providing proper size of aluminium lugs with due care complete all as specified and directed.
S&F in replacement MCB SPN 40/63 Amps 'C' series, breaking capacity 10 KA of rating & making connection complete all as specified and directed.
S&F in replacement MCB single pole, 6 to 32 amps rating, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
S&F in replacement security light in pressure die cast IP 66 LED security/ street having system wattage 35 Watt with suitable size of connecting wire complete all as specified and directed.
M&L for 15 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.
S&F street light bracket made out 32 mm die bore GI pipe, light grade of length not less than 1:2 Mtr, bend to required shape with clamps, nuts & bolts for supporting the brackets complete all as specified & directed.
S&F in replacement sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, single pole of current rating 20 amps, C series 240 volts AC complete all as specified & directed.
S&F three phase energy meter 4 core with LCD display rating 10-60 Amp complete all as specified and directed. Make: Model PPEM 26 of HPL or equivalent in other specified make complete all as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sq mm 3.5 core including taking down complete all as specified & directed. Note:- Earth work, Sand & Bricks shall be paid separately under respective items
Supply and laying sub class 'B' bricks laid dry and flat across the length of cable for protection of cable complete all as specified and directed.
M & L for sand cushioning with Ganga Sand to underground cable (8 cm thick before laying and 15 cm thick after laying the cable complete all as specified & directed. Note:- Punned thickness shall be measured for payment.
M&L for 50 mm bore GI tubing 'light grade' with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete all as specified & directed.
Disconnecting existing tanks exceeding 500 & not exceeding 1000 ltr, setting a side (or tanks, setting aside ( or lowering if required) for lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixig in position complete all as specified & directed.
Dismantling RCC water tanks and removing for capacity exceeding 250 liters and not exceeding 500 ltrs etc complete all as specified & directed.
Dismantling and breaking up drain waste pipes (SGSW, AC or RCC, CI) of internla dia 75/100 mm , set in cement mortar complete all as specified and directed.
Excavation in trenches n.exceeding 1.50m wide and n.exc 1.50m depth for foundation etc or for shafts, walls, cess-pits, manholes, pier holes, cable etc n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.
Removing excavated materials n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point, complete all as specified & directed.
Returning, filling in including spreading, leveling watering and well ramming in layers not exc. 25cm thick complete all as specified and directed.
Crown Engineering Corporation
Channa Brothers and Co.
M/S JAI DURGA CONSTRUCTION
M/S A P CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .