CHAIN LINK FENCING WORKS

Amount

Site Grading (NOTE: For Item Sr. No. inside Item Description, Bidder to refer the price schedule attached with Tender as PART II PRICED SECTION)

Felling trees of the girth (measured at a height of 1 m above ground level), including cutting of trunks and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.

Beyond 30 cm girth upto and including 60 cm girth

Beyond 60 cm girth upto and including 120 cm girth

Beyond 120 cm girth upto and including 240 cm girth

Above 240 cm girth

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil.

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre,as per direction of Engineerin-charge.

Earthwork

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.Works included in this item cannot be part of item 11

Earth/ sand filling in plinth in layers not more than 150mm thick including necessary carriage, watering, ramming etc. complete as directed and specified including payment of land compensation, forest royalty, sales tax and other duties and taxes as may be necessary lead upto 90m and lift upto 2m. Works included in this item cannot be part of item 10

Fencing works

Supplying, fitting and fixing chain link fencing of 10 S.W.G, G.I. Wire 50mm x50mm mesh fitted to M.S angle iron post at 2000mm apart of specification detailed below including supplying, fitting and fixing hooks, eye bolts with nuts, staples and bolts including three horizontal lines of G.I wire 10 S.W.G at top,middle and bottom and with one vertical line to each fencing post for keeping the fencing tight and erect complete, including one coat of primer to M.S angle iron post in P.C.C base etc. with following. a) Corner and end posts with M.S angle of size 50mmx50mmx 5mm and length not less than 1800mm only duly slotted and bottom torqued with two numbers as stay posts.. b). Intermediate post with M.S angle of size 40mmx40mmx5mm and length not less than 1800mm only duly slotted and bottom torqued and splayed. c).Stay post with M.S angle of size 35 mmx35mmx5mm and length not less than 1800mm duly slotted and bottom torqued and splayed. All M.S angle iron posts are to be fitted to P.C.C base embedded not less than 600mm (P.C.C. work shall be measured and paid separately). Note: This item is for fencing works only

Gate works

Supplying, fitting and fixing single/double leaf heavy duty iron gate, frame made from 50mm x 6mm M.S. flat iron with another horizontal flat at the middle, 20mm dia M.S bars at 200mm apart from bottom flat to top flat and 20 mm dia M.S. bars at 200mm apart from bottom flat to middle flat including drilling, welding etc. complete. All vertical bars are to be protruded at least 100mm above the middle and top flat is to be flattended and pointed as directed. Necessary locking arrangement on both faces, arrangement for temporary closing the gate and 2 nos.( minium) strong iron hinges of M.S bars and flat of same sizes on each leaf to be embeded in C.C brick pillars as necessary including a red oxide painting to all iron works as directed and specified. (Separate payment will be made for posts). Note: This item is for gate works only

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all levels. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement will be measured and paid separately) Without using admixture, plasticiser M20 grade

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and ties. Cement mortar 1:3 (1 cement : 3 coarse sand). This scope is for toe wall above the tie beam level

12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand).

Providing and laying plain cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate with cost of necessary form work including dewatering if necessary, and curing for plain cement concrete work complete as directed Without using admixture, plasticiser M10 grade

Providing and laying Reinforced cement croncrete works using cement, coarse sand & 20mm down graded stone aggregate including dewatering if necessary, and curing for reinforced cement concrete work complete as directed (Reinforcement and Form work will be measured and paid separately) Without using admixture, plasticiser M30 grade

Providing and erecting in position form work, shuttering and boxing using plywood / steel shuttering materials of approved quality for all height and all type of concrete elements vertical, horizontal or inclined including scaffolding, stagging, fasteners, nails, wires, keeping in position till concrete is laid and members have acquired required strength, removal thereafter, applying shuttering oil etc. complete as directed by Engineer-in-Charge. This Form work is applicable for M30 grade Concrete only.

M/s M.A. Enterprise

M/s R.P.JALLAN