SPL REPAIRS TO ROOF SHEET, FALSE CEILING, JOINERY WORKS TO TMQS (PH-II) AND CERTAIN SANCTION MINOR WORKS AT HQTC (U) BANGALORE

Amount

Surface excavation n.exc 30 cm deep and averageing 15 cm deep and getting out in soft/loose soil etc all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foudation etc, or for shafts, wells cesspits, manholes, pier holes etc n exc 10 sqm on plan and n exc 1.5m in depth and getting out in soft/loose soil etc all as specified and directed.

Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm thick in soft / loose soil etc all as specified and directed.

Removing excavated materials out side MoD land exc 5Km and depositing where directed at a level not exceeding 1.5m above the starting point in soft/loose soil etc all as specified and directed.

Material & labour Hard core, broken stone/boulders to gauge n exc 63 mm etc all as specified and directed.

M&L for cement concrete type A0 1:1:5:3 (using 12.5mm graded stone aggregate ) for filling holes in brick, stone walls, slabs, lintel, floors etc complete all as specified and directed

M&L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as foundation filling or mass concrete complete all as specified

M&L PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregate) as filling of pressed steel door frames etc complete all as specified

M&L for Pre-cast cement concrete block type C1 1:3:6 (20mm graded stone aggregate) masonry with solid blocks, exc. 10cm in width and setting in mortar 1:6 complete.

M&L for providing precast cement concrete solid building blocks type C1 1:3:6 (20mm graded aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar 1:4, complete in walls etc all as specified and directed.

Cutting hole exc 100 sqcm but n.exc 250 Sqcm into or throught cement concrete slabs, chajjas, balcony etc reinforced or otherwise etc all as specified and directed.

S&F 35mm thick 2nd class hard wood glazed and skeleton shutter as in door open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.24(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutter as in windows and ventilators open rebated and prepared to receive glass, gauge etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part I, Section 8 clause 8.24(b) ® kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 2nd class hard wood 35 mm thick plain framed panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P comeercial ply or 12 mm veneered particle board with commercial vrneering on both faces. The size of rail and stile as per IS ; 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each etc all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc. 4 sq. m each etc all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each etc all as specified and directed.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each etc all as specified and directed.

Refixing of wooden shutters in same opening not exceeding 1Sq.m. each all as specified and as directed. (Note :`refixing' includess taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.

Refixing of wooden shutters in same opening exceeding 1Sq.m. and not exceeding 2 Sqm each all as specified and as directed. (Note :`refixing' includess taking down, easing and ajusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc all as specified and as directed.

S&F second class hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc all as specified and directed.

S&F of 35mm thick IInd class factory made plain, framed, pannelled shutters (any number of panels) factory made with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.

M & L 40mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides etc all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site etc complete all as speicfied and directed

S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

S&F 125mm aluminium anodised barrel tower bolts of extruded section and fixed etc all as specified and directed.

S&F 200mm aluminium anodised barrel tower bolts of extruded section and fixed etc all as specified and directed.

S&F 300mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel etc all as specified and directed.

S&F 125mm long Butt hinges, medium weight, cold rolled mild steel etc all as specified and directed.

S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat complete all as specified.

S&F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate wirh necessary screws to wooden chowkhat or welding to steel door chowkhat complete all as specified.

S&F 150mm Aluminium handles, cast type anodised etc all as specified and directed.

S&F 125mm Aluminium handles, cast type anodised etc all as specified and directed.

S&F 150mm long aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy and fixed etc all as specified and directed.

S&F in repairs curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section complete all as specified.

S&F in repairs 25mm dia mild steel powder coated, fancy type curtain rod complete all as specified.

S&F kitchen utensil rack in steel made of premium grade stainless steel and highly durable and rust-proof of size not less than 90cmx80cmx20cm etc all as specified and directed.

S&F Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc all as specified and directed.

S&F in repairs Stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples etc all as specified and directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 etc all as specified and directed.

Mild steel, plain, black sheet 1 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required® etc all as specified and directed.

S&F for Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, etc all as specified and directed.

Pressed steel frames for doors of size 165x60 mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., etc all as specified and directed.

S&F powder coated anodised aluminium sliding window (three track) and ventilator shutters, without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

S&F anodised aluminium frame powder coating, for doors, windows, ventilators /fixed partition etc.with one or more rebates including joining cleat for fixing etc. complete all as specified

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc all as specified and directed.

S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall or in door, fixed with self tapping screws etc all as specified and directed.

S & F for 4 mm thick of size 600x600mm HSPC (high pressure Steam Cured) pre-primetered self embossed, textured designer board E-Board Classic to be fixed aluminium grid/section size 600mmx600mm with main runner 38x24x0.9mm thick ,cross tee 28.6x24x0.9 mm and wall angle 19x19xo.9 mm duly suspended with 2mm dia GI bar hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin from the roof with alignment clip including providing provisions for light fixtures of any size and finally applying two coats of oil bound distemper complete all as specified.

M&L for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded stone aggregate) as in flooring, foot path, hard standing, plinth protection, bases of water tanks etc all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub-base layer etc all as specified and directed.

M&L for 75 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in flooring/footpath surface even and smooth finish with using extra cement etc all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) etc all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 400mm x 400mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match etc all as specified and directed.

All as per item No 54 here in before above but as in wall skirting including 10mm thick rendering of CM 1:4 and pointed in white/ coloured cement to match etc all as specified and directed.

M&L for glazed ceramic coloured/digital tiles in vertical surface 350x250mm x 7mm/ 450x350x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick bedding layer of cement mortar 1:4 etc all as specified and directed.

M&L for Non-skid ceramic coloured tiles 7 to 8mm thick of size 300mm x 300mm in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM 1:6 and pointed in white/ coloured cement to match etc all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including racking out joints, hacking for key, scrubbing down with water, etc all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:6, on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc all as specified and directed.

M&L for rendering 15mm thick cement plaster in cement morter 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement etc all as specified and directed.

M&L for preparation of new plaster surface of walls and applying three coats of white wash on walls etc all as specified and directed.

M&L for 2 coats of Distempering wall with distemper oil emulsion white or tinted over a coat of 1mm thick wall care putty, including preparation of new surface etc all as specified and directed.

Complete removal existing tretment on walls washing, rubbing down and stopping of existing treatment applying two coats oil bound emulsion distemper using rollers to match with existing surface etc all as specified and directed.

M&L for 2 coats of cement paint over a coat of priming plastered and other surfaced with alkali resistant priming paint including preparation of new surfaces etc all as specified and directed.

Two coats of cement based paint on walls, pillasters, cornices, etc., including necessary prepration of old finished surfaces all as specified and as directed

One coat of white wash on old decorated surfaces of walls including necessary preparation of surfaces all as specified and as directed.

S&F sheet glass, of 3mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane etc all as specified and directed.

S&F sheet glass, of 3mm thick ordinary quality, ground or obscured or frosted, on one side in square n.exc 0.5 Sqm in each pane etc all as specified and directed.

Hacking out old broken glass of any thickness and description from wooden/ metal frames fixed with wooden beads/ putty all as specified and as directed.

M&L for preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed.

One coat of synthetic enamel paint on old painted wooden surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described

One coat of synthetic enamel paint on old painted steel surfaces of any description over 10cm width or girth including necessary preparation of surfaces all as specified and as directed.

Supply & Fixing Hygenic health fauset including 1.0 mtr long CP flexible tube with hook etc complete all as specified directed. Make Jaquar Cat part No-ALD CHR 573 or equailent.

Supply & Fixing in repair CP two way bib tap with wall flange standard of any colour screwed for iron pipe and fixed,15 mm bore etc complete all as specified directed. Make- Jaguar Cat No-FLR-5041N or equailent.

Taking up or down 15mm bore water tubing and connection complete and or cleaning for refixing etc all as specified and as directed.

Taking up or down 20 mm bore water tubing and connection above four storey to eight storey building , cleaning for refixing all as specified and as directed.

Supply & Fixing CPVC15mm dia pipe of pressure rating 10kgf/cm² fixed complete to walls, ceiling or in floor etc. any type of pipe etc complete all as specified directed.

All as per item No 79 here in above but 20mm bore etc complete all as specified directed.

Supply & Fix Brass CPVC Elbow (3/4 to 1/2) etc complete all as specified directed.

Supply & Fix Brass CPVC 15mm Tee etc complete all as specified directed.

Supply & Fix Brass CPVC 20mm Tee etc complete all as specified directed.

Supply & Fix Brass CPVC 15mm union etc complete all as specified directed.

Supply & Fix Brass CPVC 20mm union etc complete all as specified directed.

Forming construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A' all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dresses stonework and precast concrete articles etc all as specified and directed.

Demolition of cement concrete in ground floors and pavings n.exc 15cm thickness below or ground level all as specified and as directed. Note: All debris and rubbish shall be removed from MOD land during or at the end of each working period at his risk and cost in accordance with all applicable federal, state, and local regulations.

Dismantling boarding, any description(wall pannelling/ ceilling/ linning/ cladding/ partition etc.) fixed in any position with nails/screw complete all as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc etc all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof covering etc etc all as specified and directed.

Removing old dumped junk/ building materials/ debris/ tree roots, trunk, & branches of any size etc. to a distance of 30Km or beyond, out of premises of metropolitan area, including loading, unloading by manually or by mechanical means (JCB) and to be transported through tractor-trolly or tipper and stacking at the destination.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete including fittings & fixtures such as switches, ceiling rose, pendants, regulators, sockets, ceiling roses,pendants, regulators, light fittings etc. Removing materials to store for keeping in safe custody for taking credit and making good disturbed surfaces of walls, floors, etc etc all as specified and directed.

Point wiring with cable of PVC insulated FRLS copper multistranded conductor 1.5 sqmm 1100 volts grade in and including heavy grade PVC Casing Caping Pipe ISI marked with all accessories and fixing arrangements on wall/ceiling/floor etc. including fixing top cover /PVC junction boxes fixing on wall surface for housing switches/sockets/regulators etc. with and including 1.5 sqmm PVC insulated multistranded copper earth continuity conductor connecting to the common earth dolly etc complete all as specified and directed for the following :-

One light controlled by one single pole 5 Amps switch

One Ceiling fan point controlled by one single pole 5 Amps switch

Supply and fix Modular switch , single pole one way 6 Amps.

Supply and fixing of fan regulator upto with 5 step speed control for fans any sweep etc etc all as specified and directed.

Supply and fixing PVC ceiling rose 65 x 50 mm surface type with 3 terminals etc etc all as specified and directed.

Taking down ceiling fan circulators, sealing cable end, dismantaling blades, and removing fan including painting and refix the same including connecting up and provision of cable from ceiling rose or connector to fan etc etc all as specified and directed.

SRI GANESH ENTERPRISES