Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹79.2 LAccepted-AOC | L1 | Accepted-AOC Being lowest and reasonable tender | |
| 2 | L2₹86.2 L+₹6.2 L (7.80%)Rejected-Finance | L2 | Rejected-Finance Being L2 bidder | |
| 3 | L3₹86.5 L+₹6.5 L (8.17%)Rejected-Finance 126 NARANG COLONY JANAK PURI NEW DELHI 110058 | NEW DELHI | NEW DELHI | DELHI | 110058 | L3 | Rejected-Finance Being L3
bidder | |
| 4 | L4₹88.9 L+₹8.9 L (11.1%)Rejected-Finance | L4 | Rejected-Finance Being L4 bidder | |
| 5 | L5₹92.4 L+₹12.4 L (15.5%)Rejected-Finance | L5 | Rejected-Finance Being L5 bidder |
Tender Value
₹1.0 Cr
EMD Value
₹1.8 L
Closing Date
19 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE AF PALAM
CWE(AF) PALAM DELHI CANTT-10
ADDN/ALTN TO SNCOs MESS AT AIR FORCE STATION PALAM
2022_MES_528372_1
CWE/PM/N-14/2022-23
Open Tender
Civil Works
Item Rate
450 days
GE AF PALAM
As per tender documents
9 documents required · 9 mandatory
₹1,000
GE AF PALAM
₹1.8 L
1 Sept 2022
3 Jun 2022
21 Jul 2022
3 Jun 2022
19 Jul 2022
11 Jul 2022
Amount
Dismantling of floor , hearth , or wall tiling including cement mortar bedding ( but not backing) and removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L for ceramic coloured/ printed non-skid tiles of size 7 to 8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and directed.
M&L for vitrified coloured tiles of size 10 mm thick (square / rectangular) area of each tile n exec. 0.36 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and directed.
All as per srl item No-03 here-in-before but 10 mm thick rendering in cement mortar 1:4 but on vertical surfaces.
M&L for coloured glazed ceramic tiles as in vertical surface of size 350x 250 x7 / 450x300x7 mm set and jointed in neat cement slurry over and including 10 mm thick rendering in cement mortar 1:4. and pointed in white or coloured cement to match with surfaces of tiles complete all as specified and directed.
Taking down cement or cement lime plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without extra cement complete all as specified and directed.
Supply only Integral water proofing compound complete all as specified and directed.
M&L for 5 mm thick rendering in cement mortar 1:3 as on ceiling & finished even & smooth without using extra complete all as specified and directed.
M&L for 10 mm thick rendering in cement mortar 1:6 on other then fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of plastered or unplastered new surfaces of ceiling and applying three coat of white wash complete all as specified and directed.
M&L for two coat of oil bound distemper over 1 mm thick wall care putty with primer after preparation of new plastered surfaces on walls complete all as specified and directed.
S&F in repair PVC flushing cistern of 10 ltrs capacity valveless, syphonic action type, low level, white with inlet, ball valve, float and handle including brackets and PVC flush pipe of 32 mm bore and connection to pipes etc complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and directed.
All as per srl item No 15 here-in-before but of length 450mm complete all as specified and directed..
S&F in repair PVC waste pipe 32mm dia, suitable for couplings 32mm & 40mm dia complete all as specified and directed.
S&F in repair vitreous china squatting pan (orissa Pattern) white of size 580x440 mm with integral foot rest and fixed as per manufacturer’s instructions complete all as specified and directed. Make:Cera/Hindware/parryware .
S&F in repair wash hand basin, vitreous China, flat back 550x400mm size, excluding taps,waste ,chain and plug and porcelain stopper but including brackets complete all as specified and directed.
S&F in repair 100mm bore cast iron , waste and vent pipes in any length with or without ears, with cement joints and fixed to walls complete all as specified and directed.
Taking down PVC rain water pipe up to 4 storey building complete all as specified and directed.
Supply and fixing 110mm dia, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps complete all as specified and directed.
Supply and fixing PVC (SWR) bends, 110mm dia fixed to PVC pipes complete all as specified and directed.
S&F in repair MS ornamental fancy type 25 mm dia curtain rod including brackets and end knobs / finials complete all as specified and directed.
Hacking out old broken glass (any thickness size, quality or description) from wooden or steel or aluminium frames glazed with putty or fixed with wooden/Aluminium beads complete all as specified and directed
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane complete all as specified.
Taking up or down 15mm steel tubing, bore of pipe 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and directed.
M&L for GI tubing, 15mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.
Taking up or down 20mm steel tubing, bore of pipe 15mm and connections in walls, ceilins, floors, etc including cleaning for refixing or removal to store complete all as specified and directed.
M&L for GI tubing, 20mm bore `medium grade` with all fittings and fixed complete to walls and ceilings or laid in floors etc complete all as specified and directed.
S&F in repairs bib taps with wall flange 15mm bore , chromium plated fancy type cast copper alloy with crutch or butterfly handle , screwed down , screwed for iron pipe or for brass ferrule complete all as specified and directed.
M&L in repairs for 15 mm dia stop valve cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both side for iron pipe or for union and fixed complete all as specified and directed.
S&F in repairs, 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
S&F in repair corner glass shelf with 12mm thick glass and bracket complete all as specified and directed.
Taking down chowkhat or frame n exc 1.5 sqm each but with shutters (without taking off shutter from the frames) complete all as specified and directed.
S&F for factory made solid panel PVC door shutter, 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet, strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement in the frame at site complete all as specified and directed.
S&F for factory made solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube incl fixing in opening complete all as specified and directed.
S&F for aluminium anodised barrel tower bolt of extruded section length of bolt 200mm complete all as specified and directed.
S&F for aluminium handles, cast type 125mm size anodized and fixed complete all as specified and directed.
S&F for 100mm butt hinges,extruded aluminium alloy with galvanised mild steel hinge pin anodised and fixed complete all as specified and directed.
Demolition of mud phuska in roofs any thickness including plastering and leeping(whether full thickness removed or only a part thereof) . complete all as specified and directed.
Demolition of brick tiles or terracing tiles,single layer on roofs any thickness complete all as specified and directed.
M&L for 15 mm thick screed bed on concrete surface in cement plaster 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for providing cement concrete PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in roof padding/ kerbs complete all as specified and directed.
M&L for APP based modified pre fabricated five layer 3 mm thick and weighing not less than 3.6 Kg/Sqm water proofing membrane reinforced with polyester non woven fabric mat with 160 gm/Sqm black finished with compatible primer conforming to IS 3488 @ 0.30 Lit/ Sqm and bonding material 85/25 bitumen 1.2 Kg/Sqm before laying membrane laid by torch application side overlap of 75 mm and over lap of 100 mm longitudinally ,at the junction of roof and parapet wall with a grove of 20 x 20 mm shall be made at the height of 100 mm and membrane shall be inserted and sealed with bituminous mastic joints/overlap shall be sealed with hot bitumen 85/25 complete all as specified and directed.
M&L cement concrete tiles 25cmx25cmx22mm thick ,machine pressed with grey cement and no pigment laid over and including 15mm thick cement screed bed in cement mortar 1:4 ,set jointed in neat cement slurry in floors /roof complete all as specified and directed.
Dismantling of ceiling board (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets any type and any pattern complete all as specified and directed.
M&L for GI snap grid frame work for false ceiling including necessary fixing material complete all as specified and directed.
M&L 6 mm thick Non-asbestos fibre cement building board fixed to GI frame work with screw complete all as specified and directed. Note:-GI frame work shall be paid separately.
Demolition of stone slab and tiles of any description or thickness in floors complete all as specified and directed.
M&L for pre-polished machine cut kota stone slab flooring 18-20 mm thick over and including cement screed 15mm thick in cement mortar 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including cutting, rubbing and mirror polishing complete all as specified and directed.
M&L for pre-polished machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over and including 10mm thick rendering in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.
M&L for hardcore of gauge exc 63 but n.exc100 mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface broken stones or boulders complete all as specified and directed.
S&F machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2021 of 80 mm thick M-40 Grade laid over and including 50 mm thick sand cushioning complete all as specified and directed.
M&L for 100 mm thick cement concrete type D-2 , 1:4:8 using 40mm graded stone aggregate as in sub base of floor complete all as specified and directed.
S& F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
S&F venetian blind of make VISTA or as approved by GE complete all as specified and directed
M&L for 18-20 mm thick green marble work over 15 mm thick screed bed of 1:4 as in steps, jambs, pillers, window cills cooking platform and like in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with marble complete all as specified and directed.
M&L for 20mm thick Granite (of jet black ) work (table rubbed and polished) over 15 mm thick screed bed of 1:4 in steps ,jambs ,pillars,window cills, cooking platforms and like fixed in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including exposed edges to make half round complete all as specified and directed.
M&L for machine cut kota stone slab flooring (Except Stone) over 15 mm thick screed bed of 1:4 (C:M) , polishing, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
M&L for machine cut kota stone (Except Stone) over 15 mm thick screed bed of 1:4 (C:M) in riser of steps, skirting, dado and pillar laid cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.
S&F powder coated anodised aluminium frame for doors ,windows ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified and directed.
S&F powder coated aluminium anodised door shutter section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges and anodised aluminium snap beading screws etc complete all as specified and directed.
S&F powder coated aluminium anodised window and ventilator section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 nos in each door, hinges and anodised aluminium snap beading screws etc complete all as specified and directed.
S&F in 4.8 mm thick sheet glass ordinary quality in panels of aluminium doors /window/ partitions etc fixed with aluminium glazing clips & rubber neoprene packing complete all as specified and directed. Note:-The cost of aluminium glazing clips & rubber neoprene packing are included in quoted rate of Srl item No-65 here-in-before.
S&F 12 mm thick prelaminated particle board both sides laminated of interior grade of approved brand with lamination of approved shades complete fitted as in door panels/partition etc complete all as specified and directed.
S&F double action floor spring for aluminium door shutters complete all as specified and directed.
S&f 100 mm size mortice locks of aluminium body ,4 levers suitable to aluminium door shutters complete all as specified and directed.
S&F rubber beading in aluminium door and windows complete all as specified and directed.
Demolition of cement concrete in floors of n.exc 15 cm thick below and above ground floor complete all as specified and directed.
M&L for 50 mm thick PCC (1:4:8) type D2 using 40 mm graded stone aggregate as in sub base complete all as specified and directed.
M&L for 20 mm thick screed bed on concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10-12mm thick parking tiles of approved grade and colour design & pattern for light traffic parking ,lawn etc of required strength and sizes complete all as specified and directed.
Demolition of brick work in cement mortar incl all quoins arches pillars etc complete all as specified and directed.
M&L for brickwork with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 old size bricks complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coat of premium acrylic emulsion paint having VOC less then 50gm/litre and UV resistant as per IS 15489:2004, alkali and fungal resistant dirt resistant exterior paint of required shade (company depot tinted) with silicon additives @1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10sqm over new smooth surfaces complete all as specified and directed.
M&L for framed work as in grill grating etc with end of bars barred iron door ,ladders framed balusters, walk away railing of water tanks and similar work conforming to fe 290 gde E 165 complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M25 grade cement concrete in position jointed in cement mortar 1:3 including making joints with grooves complete all as specified and directed.
M&L for Guniting to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar 1:4 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work and all other arrangements complete all as specified and directed. Note.- Where ever reinforcement required shall be measured and paid separately
M&L for mild steel bars 10 mm dia and over , cut to length bent to shape required ,including cranking bending spirally for hooping for columns ,hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clips complete all as specified and directed.
All as per srl item No-81 here-in-before but 5 mm dia and over and including 10 mm dia in stirrups ,spacers and binders complete all as specified and directed.
S&F of Grease separator (Nominal size : NS 10) made of polyethylene as per DIN EN 1825, proven stability of 50 years, for below ground installation. Overall dia 1320 mm : with ventilation provision, emptying via suction line DN 65 PN 10, counter flange with fire hose quick coupling 75B and 2(1/2)” blank cap and satisfy reaction to fire class A. Standard odour tight top cover of 600 mm dia. clear opening;frame made of concrete material and cover made of cast iron, with raising tube, load class B125 according to EN124, inlet and outlet dia. of pipe DN150, with grease storage capacity of 415 L, Sludge Storage 1010 L and overall capacity 2170 L including necessary excavation, returning, filling and removal of soil, 150 mm thick PCC in foundation 1:2:4 (type B-1) using 20mm graded stone aggregate, all as per manufacturer's instructions and as specified and directed. Make : Lipumax(ACO) , Kessel or its equivalent
M&L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate in plinth protection, 75 mm thick, finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3) by weight complete all as specified
Excavating in post holes (or similar holes) each not exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exc 50m and making good surface, work in soft/loose soil, complete all as specified and directed.
M&L for PCC 1:2:4 type B2 using 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
M&L for steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240 complete all as specified and directed.
M&L for preparation of newly steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Dismantling of asbestos (corrugated / semi corrugated etc) sheets as in roof coverings etc. complete all as specified and directed.
Supply and fixing corrugated steel Galvalume sheet 0.50 mm thick of an colour having tensile strength 550 Mpa as in roof covering fixed with self tapping screws complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position etc complete all as specified and directed.
M&L for plain fillets of 2nd class hardwood, square/rectangular in section clean sawn secured with nails area exc. 13 sqcm but not exc. 25 sqcm complete all as specified and directed.
M&L for cupboard stutter with 18/19mm one side decorative and other side balancing lamination factory made BWP grade marine ply as per IS-710 of approved brand including 2 mm thick PVC banding tap with hot glue charge complete all as specified and directed.
S&F for continuous (Piano) hinges, mild steel, bright finished or electro galvanized of 30 mm complete all as specified and directed.
M&L for magnetic catcher double strip (horizontal type) of approved quality in cupboards including fixing with necessary screws etc. complete all as specified and directed.
S&F 75 mm brass handles cast type polished complete all as specified and directed.
M&L for complete removal of existing treatment of old wall surfaces, providing and applying wall care putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and two coats of oil bound distemper (1st quality) of required shade and colour complete all as specified and directed.
M&L for complete removal of existing treatment of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.
M&L for preparation of old decorated surface of external wall by removal of existing treatment with mechanical sander (rpm 1500-2700) alongwith internal dust extraction system for clean environment certified by reputed paint manufacturers, then washing the surface with bleaching powder solution for treatment of fungal acrylic emulsion paint (walmasta of Berger paint or equivalent in Asian paint or Nerolac having three years of performance warranty) over a coat of exterior water based primer of same make complete all as specified and prescribed by manufacturer of paint and as directed at site.
Removing old paint by removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and preparation of previously untreated wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying two coats of synthetic enamel paint (any tint) 1st quality complete all as specified and directed.
Removing old paint by paint removers or burning off by blow lamps and cleaning with scrapers, any number of coats, any width or girth and preparation of previously untreated steel surfaces of any description not otherwise described over 10 cms width or girth and applying two coats synthetic enamel paint (any tint) 1st quality complete all as specified and directed.
M&L for preparation of concrete or plastered surface, plain/kerb stone moulded over 10 cm width or girth by cleaning, brushing etc and applying two coats of synthetic enamel paint complete all as specified and directed.
Taking down carefully unserviceable copper/aluminium point wiring (light, fan, socket or power) complete including fixture and fitting such as switches, ceiling rose lamp holder, regulators, sockets, light fittings, wooden terminal boxes, plastic laminated sheet cover, including taking down of DBs any type, meter board any type complete all as specified and directed.
Taking down unserviceable sub main wiring with conduits/battens etc complete all as specified and as directed.
Taking out unserviceable earthing material any type complete all as specified and as directed.
M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories in concealed wiring system including necessary cutting, chasing and making good the disturbed surface of wall including pressed steeI boxes with bakelite sheet for mounting switches, sockets, fan regulators, etc and earth wire single core PVC insulated multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly for the followings complete all as specified and as directed.
One light point controlled by one switch one way
One fan/exhaust fan point controlled by one switch.
One socket outlet 5 Amp controlled by one switch on independent board
One 3 pin 5Amps socket out let point on the same board controlled by one switch complete
All as per Srl item No. 107 here-in-before but for one power point 6 pin 15 Amps socket outlet with 2.5 Sqmm stranded copper conductor cable FRLS PVC insulated including earth wire 2.5 Sqmm copper conductor cable FRLS connected to earth dolly.
Supply and fixing of switch piano flush type 5 Amps, single pole one way complete all as specified and directed.
Supply and fixing of socket out let 3 pin 5 Amps, flush type complete all as specified and directed.
S&F of switch piano flush type single pole one way15 Amps complete all as specified and directed.
Supply and fixing of socket outlet 2 in 1, 6 pin 5/15 Amps, flush type complete all as specified and directed.
Supply and fixing of stepped type fan regulator 300 watt, 230 volts, 50 HZ, AC. complete all as specified and directed.
M&L for point wiring with single core PVC insulated but unsheathed 1.5 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories in concealed wiring system including necessary cutting, chasing and making good the disturbed surface of wall including modular metal flush boxes and modular plates of suitable modules for mounting modular switches, sockets, fan regulators, etc and earth wire single core PVC insulated multistranded copper conductor cable 1100 volts grade IS-694 marked 1.5 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly for the followings complete all as specified and directed.
One light point controlled by one switch one way
One fan/exhaust fan point controlled by one switch.
One fan/exhaust fan point controlled by one switch.
One 3 pin 5Amps socket out let point on the same board controlled by one switch complete
All as per Srl item No. 114 here-in-before but for one power point 6 pin 15 Amps socket out let with 2.5 Sqmm stranded copper conductor cable FRLS PVC insulated including earth wire 2.5 Sqmm copper conductor cable FRLS connected to earth dolly complete, all as specified and directed.
S&F of modular switch 1 way 6 Amps one module complete all as specified and directed.
S&F of modular socket 6 Amps 2/3 Pin combined 02 module complete all as specified and directed.
S&F of modular switch one way 16 Amps, one module complete all as specified and directed.
S&F of socket modular type 6 amp/16 amps, 2/3 pin combined 02 Module complete all as specified and directed.
S&F of modular type fan regulator step, 120W - 2 module complete all as specified and directed.
Supply and fixing of ceiling rose, surface type, 65mm x 50mm, 3 terminal complete all as specified and directed.
S&F of Indoor decorative LED battens- integrated type 20 watt 4 feet white fixture with extruded aluminium body, complete with driver and all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
S&F of Indoor decorative LED battens- integrated type 10 watt 2 feet white fixture with extruded aluminium body complete with driver and all accessories internally are wired and including connecting up with twin core copper conductor cable complete all as specified and directed.
Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.
Supply and fixing of sheet metal enclosure for distribution board SPN (when MCBs to be used ) 12 ways double door, 200 Amps rated bus bars and with neutral, earthing bar and din rail complete all as specified and directed.
Supply and fixing of vertical type load line distribution board, double door, 4 ways, AC, 3 phase, 415 volts, TPN bus bar 200 Amps rating and earth bar & din rail suitable for accommodating MCCB 100/125 Amp, 16KA 4 Pole as incomer complete all as specified and as directed by Engr-in-Charge.
Supply and fixing for MCCB, 4 pole 100A, 25 KA, 415 Volts with thermal magnetic protection unit including making necessary electrical connections complete all as specified and directed.
Supply and fixing 240V, 10 KA 'C' curve MCB of SPN and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve MCB of single pole and current carrying capacity 6 to 32 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing 240V, 10 KA 'B' curve MCB of single pole and current carrying capacity 40 A, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.
Supply and fixing of singIe poIe and neutraI encIosure 240 VoIts with two pin and earth pIug and socket compIete with one singIe poIe MCB of 20 Amps rating complete all as specified and directed.
M&L for sub main wiring with two single core 4.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25 mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 4.0 sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and directed.
M&L for sub main wiring with two single core 6.0 sqmm PVC insulated FRLS multistranded copper conductor cable drawing into and including rigid non metallic PVC conduit of size not less than 25 mm dia, medium grade ISI marked with all conduit fittings & fixing accessories and one single core 6.0 sqmm multistranded copper conductor cable as continuous earth wire complete all as specified and directed.
M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in cement mortar 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.
S&F of LED Building light highly efficient high power 40 Watt with powder coated pressure die cast Aluminium with heat resistance toughened glass lens with internally prewired incl electronic driver and connecting up with three core flexible copper conductor 1.5 sqmm cable complete including GI pipe light grade 40mm dia bracket not less than 1.5 Mtr long and bent to a shape for fixing of street lights with necessary MS clamps, nuts, bolts etc complete all as specified and directed.
Supply and fixing exhaust fan, steel body AC single Phase 230V of size 300mm sweep with blades, frame and louvers complete all as specified and directed.
Supply and fixing rigid non-metallic PVC conduit exclusive of boxes (junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. of external dia 20 mm concealed in wall by cutting and chasing and making good the disturbed surface of wall complete all as specified and directed.
Taking down carefuIIy water heater storage type ,eIectric, capacity 25 Iitres carefully and depositing to the MES store and refixing the same after completion of B/R work complete all as specified and directed.
Taking down ceiling fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and refixing after cleaning complete all as specified and directed
Taking down exhaust fans of any sweep and any size including cable connections and disconnecting of fan blades and removing the fan with blades and refixing after cleaning complete all as specified and directed
M&L for concealed point wiring with single core PVC insulated but unsheathed 4 Sqmm FRLS multistranded copper conductor cable 1100 volts grade IS-694 marked drawn in and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked with all conduit fittings and fixing accessories and earth wire single core PVC insulated but unsheathed multistranded copper conductor cable 1100 volts grade IS-694 marked 4 Sqmm FRLS cable as continuous earth wire connecting to common earth dolly in concealed wiring system including making good the disturbed surface of wall , for Geyser point complete all as specified and directed.
S&F Exhaust fan, steel body AC single phase 230V of size 300mm sweep with blades , frame and louvers with complete making of hole and afterwards making it good complete all as specified and directed.
S&F single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified and directed.
S&F of electric storage type water heater (Geyser) of 25 litres capacity, 230 Volts, single phase, BEE 5 star rated complete with all accessories like pressure release valve, nuts, bolts, washers etc and 02 Nos of 450 mm long flexible stainless steel pipes for connections complete all as specified and directed.
M&L for bib taps, cast copper alloy with crutch or butter fly handle, screwed down, high pressure for iron pipe/fittings or for brass ferrule, of size 15 mm dia bore complete all as specified and directed.
M&L for stop cocks, cast copper alloy, fancy type, long shank and cup, chromium plated, hot or cold marked, with crutch or butter fly handle, screwed down, high pressure for iron pipe/fittings or for brass ferrule, of size 15 mm dia bore complete all as specified and directed.
Taking out old unserviceable LT under ground cable any size from trenches, pipes etc complete all as specified and directed.
Taking down old unserviceable LT panel board from its position complete all as specified and directed.
Taking down old unserviceable garden/post top light fittings any type complete all as specified and directed.
Excavation in trenches in soft/loose soil not exceeding 1.50 Mtrs wide and not exc. 1.5 Mtr deep and getting out for taking out/laying cable, poles & stay etc complete all as specified and as directed.
Returning, filling, in including spreading, leveling, watering and well ramming in layers not exc 25 cm thick after the cable have been laid tested complete all as specified and directed.
Removal of excavated surplus soil to a distance not exc. 50 Mtrs and depositing where directed at a level not exc 1.5 Mtr above the starting point complete all as specified and directed.
M&L for sand cushioning to under ground cable provided with layer of sand (8cm deep before laying the cable and 15 cm deep after laying the cable i.e total 23 cm) complete all as specified and directed.
M&L for brick laid in trenches for protection of cable burnt clay sub class ‘B’ complete laid dry flat in trenches complete all as specified and directed.
Supply, laying, testing and commissioning connecting LT 1100 volts grade XLPE insulated screened PVC bedded electric power cable (Heavy duty) galvanised steel strip armoured with stranded aluminium conductor 10 sqmm 2 core laid in trenches/ ducts fixed to wall/pole/inside panel drown through pipe complete all as specified and directed.
Supply and fixing of LED bollard light fitting 15 watts, mounted on 1.0 m height bollard, IP 65 complete with driver, internal wiring and connection with suitable size copper conductor wire complete all as specified and directed.
Supply and fixing of LED gate light fitting 25 W, IP 65 complete with driver, internal wiring and connection with suitable size copper conductor wire complete all as specified and directed.
M&L for earthing complete for building with galvanized mild steel earth plate electrode 600mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanised iron strip 32×6 mm as earthing lead fixed by means of nuts, bolts, thimbles, check nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in cement mortar 1:4, funnel with wire gauge of 22 gauge, 8 mesh per liner inch, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I and specified including provision of earth wire protected by 15mm dia medium grade GI pipe and watering GI pipe shall be 20mm bore medium grade etc complete all excavation and earth work & connecting the earthing to an earthing test point main switch board as specified and testing on completion complete all as specified and directed.
Shiv Shankar Nirman Co.
Atish Builders LLP
SHEELSONS ENTERPRISES
Parveen Builders
Commercial Traders
M/S Parshant Associates
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .