Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.7 LAccepted-Finance | ₹7.7 L | L1 | Accepted-Finance OK |
| 2 | L2₹7.7 L+₹3,894 (0.51%)Accepted-Finance | ₹7.7 L+₹3,894 (0.51%) | L2 | Accepted-Finance OK |
| 3 | Rejected-Technical | - | - | Rejected-Technical non submission of EMD/FDR |
| 4 | Rejected-Technical | - | - | Rejected-Technical non submission of EMD/FDR |
| Sl No | Description | Qty | Unit | KAMLESH ENGINEERING WORKS L2 | V.K. ENTERPRISES L1 |
|---|---|---|---|---|---|
| 1.01 | Dismantling and removal of the existing damaged sluice gate measuring 1250 mm × 6 m from the site by cutting all grouted bolts embedded in the cement concrete (CC) and brickwork up to the bottom level, and lifting the gate out of the water drain using a mobile crane for disposal outside the drain area. | 1 | Job | 47,262.5 ₹55,769.75 | 47,025 ₹55,489.5 Lowest |
| 1.02 | Construction of a temporary bund upstream of the sluice gate location to close the flow and maintain the required wastewater level for the recycling system. | 1 | Job | 44,775 ₹52,834.5 | 44,550 ₹52,569 Lowest |
| 1.03 | Fabrication and installation of an MS frame using MS channels of size 4" × 2", 6.5 meters long on both sides, and an MS channel of size 4" × 2", 1250 mm long at the bottom, to form a complete frame for the operation/support of a 10 mm thick MS plate. The frame shall be fixed and grouted into the wall on both sides using anchor bolts and all other necessary accessories, as required for proper installation. | 1 | Job | 49,750 ₹58,705 | 49,500 ₹58,410 Lowest |
| 1.04 | Providing and fabricating guide grooves using MS square sections of size 75 mm × 75 mm × 6.5 m long (2 Nos.) on both sides and one MS square section of size 75 mm × 75 mm × 1250 mm long at the bottom. The arrangement shall form a continuous groove of 6.5 m height on both sides and 1.25 m width at the bottom to guide a 10 mm thick MS plate during its upward and downward movement, operated through an SS spindle mechanism. | 1 | Job | 1,59,200 ₹1,87,856 | 1,58,400 ₹1,86,912 Lowest |
| 1.05 | Providing and supplying an SS spindle of 60 mm diameter with threading over a length of 3.0 m. The spindle shall be installed at the top of the frame and operated through two MS U-channels of size 6" × 3", each 1250 mm long. The arrangement shall include four MS plates of size 12" × 12" × 10 mm thickness fixed at the top of the frame to provide adequate support and guidance for the upward and downward movement of the SS spindle assembly. | 1 | Job | 59,700 ₹70,446 | 59,400 ₹70,092 Lowest |
| 1.06 | MS plate of size 1250 mm × 3500 mm × 10 mm thickness, properly cut and machined with 4 points for operating the gate up and down. | 1 | Job | 69,650 ₹82,187 | 69,300 ₹81,774 Lowest |
| 1.07 | Providing and making arrangement at the top of C.I. pedestal for thrust bearing assembly using MS block of size 200 mm × 200 mm × 30 mm, including drilling, tapping (internal threading), and fixing with L.N. bolts, complete in all respects. | 1 | Job | 14,925 ₹17,611.5 | 14,850 ₹17,523 Lowest |
| 1.08 | Fabrication and providing MS block in place of GM nut for operation/lifting of sluice gate, including SS rod of 60 mm diameter and 3.5 m length, duly machined. The work shall include fixing of SS rod in MS block by welding and providing threading up to 2.0 m length on the rod, complete in all respects. | 1 | Job | 19,900 ₹23,482 | 19,800 ₹23,364 Lowest |
| 1.09 | Providing and supplying thrust bearing No. 51211, Make: SKF / FAG/ DJB Approved, complete in all respects. | 1 | Set | 7,462.5 ₹8,805.75 | 7,425 ₹8,761.5 Lowest |
| 1.10 | Providing and supplying C.I./M.S. bearing housing suitable for thrust bearing, complete in all respects, including machining and finishing as required. | 1 | No | 4,975 ₹5,870.5 | 4,950 ₹5,841 Lowest |
Tender Value
Refer Docs
EMD Value
₹15,600
Closing Date
31 Jul 2026, 3:00 pmClosed
Sh. Yogesh Lohchab
Wazirabad Water Works
Rehabilitation of Sluice Gate and Associated Operating Components at Drain Outfall to Ensure Efficient Hydraulic Flow Control at 1st 40 MGD Plant at Wazirabad Water Works.
2026_DJB_295889_3
NIT No. 04 (2026-27)
Open Tender
Housekeeping/ Cleaning
Item Rate
15 days
Wazirabad Water Works
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
DJBEMD A/c No-50448339804
₹15,600
14 Aug 2026
25 Jul 2026
31 Jul 2026
25 Jul 2026
31 Jul 2026
25 Jul 2026
25 Jul 2026 - 31 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount | GST % |
|---|---|---|---|---|---|---|
| 1.01 | Dismantling and removal of the existing damaged sluice gate measuring 1250 mm × 6 m from the site by cutting all grouted bolts embedded in the cement concrete (CC) and brickwork up to the bottom level, and lifting the gate out of the water drain using a mobile crane for disposal outside the drain area. | 1 | Job | 80 | ₹80 | 18% |
| 1.02 | Construction of a temporary bund upstream of the sluice gate location to close the flow and maintain the required wastewater level for the recycling system. | 1 | Job | 80 | ₹80 | 18% |
| 1.03 | Fabrication and installation of an MS frame using MS channels of size 4" × 2", 6.5 meters long on both sides, and an MS channel of size 4" × 2", 1250 mm long at the bottom, to form a complete frame for the operation/support of a 10 mm thick MS plate. The frame shall be fixed and grouted into the wall on both sides using anchor bolts and all other necessary accessories, as required for proper installation. | 1 | Job | 80 | ₹80 | 18% |
| 1.04 | Providing and fabricating guide grooves using MS square sections of size 75 mm × 75 mm × 6.5 m long (2 Nos.) on both sides and one MS square section of size 75 mm × 75 mm × 1250 mm long at the bottom. The arrangement shall form a continuous groove of 6.5 m height on both sides and 1.25 m width at the bottom to guide a 10 mm thick MS plate during its upward and downward movement, operated through an SS spindle mechanism. | 1 | Job | 80 | ₹80 | 18% |
| 1.05 | Providing and supplying an SS spindle of 60 mm diameter with threading over a length of 3.0 m. The spindle shall be installed at the top of the frame and operated through two MS U-channels of size 6" × 3", each 1250 mm long. The arrangement shall include four MS plates of size 12" × 12" × 10 mm thickness fixed at the top of the frame to provide adequate support and guidance for the upward and downward movement of the SS spindle assembly. | 1 | Job | 80 | ₹80 | 18% |
| 1.06 | MS plate of size 1250 mm × 3500 mm × 10 mm thickness, properly cut and machined with 4 points for operating the gate up and down. | 1 | Job | 80 | ₹80 | 18% |
| 1.07 | Providing and making arrangement at the top of C.I. pedestal for thrust bearing assembly using MS block of size 200 mm × 200 mm × 30 mm, including drilling, tapping (internal threading), and fixing with L.N. bolts, complete in all respects. | 1 | Job | 80 | ₹80 | 18% |
| 1.08 | Fabrication and providing MS block in place of GM nut for operation/lifting of sluice gate, including SS rod of 60 mm diameter and 3.5 m length, duly machined. The work shall include fixing of SS rod in MS block by welding and providing threading up to 2.0 m length on the rod, complete in all respects. | 1 | Job | 80 | ₹80 | 18% |
| 1.09 | Providing and supplying thrust bearing No. 51211, Make: SKF / FAG/ DJB Approved, complete in all respects. | 1 | Set | 80 | ₹80 | 18% |
| 1.1 | Providing and supplying C.I./M.S. bearing housing suitable for thrust bearing, complete in all respects, including machining and finishing as required. | 1 | No | 80 | ₹80 | 18% |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.69 MB
NIT4_3.pdf
Tender Documents • 1.14 MB
BOQ_393756.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .