REPAR TO FENCING, STEEL GATE, PATH. HARD STANDING, INTERLOCKING TILES, SWT AND MISC WORKS AT AF STATION UDHAMPUR

Amount

Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified.

Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed by Engineer-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

Dismantling of machine pressed concrete interlocking paver block tiles of any description or thickness in floors, aprons etc laid dry or laid dry and pointed complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings, complete all as specified.

Taking down cement plaster, of any description on brick or stone or cement concrete walls/ceiling including raking out joints, hacking for key, scrubbing down with water complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in concrete, brickwork, masonry etc., complete all as specified & directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, posts embedded in natural ground complete all as specified & directed.

Dismantling fencing wire mesh, any type complete all as specified.

Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed.

Cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in foundation filling and mass concreting all as specified.

Plain cement concrete 1:2:4, type B-0 ( using 12.5 mm graded crushed stone aggregate ) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates, hold fast blocks, filling to pressed steel chowkat and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

Plain cement concrete 1:2:4, type B-1 ( using 20 mm graded crushed stone aggregate ) as in mass concrete, complete all as specified.

Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified.

Brickwork with sub-class ‘B’ bricks (old size), but (Except Brick) straight or curved on plan exc. 6m mean radius, built in cement mortar 1:6, complete all as specified.

S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed, (each line wire to be measured) complete all as specified.

Restraining and resecuring including making good staples etc. existing steel barbed wire to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified.

Fixing only chain link fencing including line wires, of any mesh,size and any type after restraining and rescuring including making good ,complete all as specified and directed by Engr-in-charge.

S&F Mild steel work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) quality confirming to grade Fe-290-Gde E-165, complete all as specified.

Fixing only Mild steel work as in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) quality confirming to grade Fe-290-Gde E-165, complete all as specified.

S&F Mild steel bands, straps, supports, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290-Gde E-165, complete all as specified.

Fixing only Mild steel bands, straps, supports, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; chains; hand made sliding bolts; clamps; hold fasts; wall ties; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles confirming to Fe-290-Gde E-165, complete all as specified.

Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Mild steel round bars 10mm dia and over, (Except bars) cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Supply only chain link mild steel galvanised fencing ,complete all as specified and directed by Engr-in-charge.

Mild steel bolts not exc 12 mm dia at neck, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, not exc 10cm long, complete all as specified.

Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates quality confirming to grade Fe-290-Gde E-165, complete all as specified.

Rolled mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240, complete all as specified.

M&L outdoor endura floor tiles of size 300x300mm thickness not less than 10mm set, jointed and pointed in neat cement slurry in floor,laid over and incl 15mm thick cement screed base in CM 1:4, complete all as specified and as directed.

25 mm thick, cement concrete type B-1, 1:2:4 using 12.5 mm graded stone aggregate, finished rough, as in floors, complete all as specified.

75 mm thick, cement concrete type D-2, 1:4:8 using 40 mm graded stone aggregate, finished even & rough, as in sub floors, complete all as specified.

Factory made 80 mm thick machine pressed precast concrete coloured interlocking tiles/paver blocks with glossy finish of any shape and size/colour conforming to IS 15658-2006 of M-40 grade, jointed with grey cement mixed with pigments all as specified and directed by Engr-in-Charge.

Description all as per item 33 above but except tiles.

Sand filling in floors or pavings laid in layers n.exc 15cm thick spread, levelled and blinded with earth and rammed including watering as sand cushioning for laying of interlocking tiles/paver block, all as specified.

S&F in repairs 25cmx25cmx20mm thick Chequered Cement Concrete tiles with grey cement and no pigment , machine pressed, set jointed and pointed in neat cement slurry in floor ,laid over and including 15 mm thick bedding layer in CM 1:4. complete all as specified and directed by Engr-in-charge.

Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less including use & waste of side forms, complete all as specified.

M&L for replacement of saw dust and sand including mixing (sand 60% and saw dust 40%) and spreading on firing range after pluging of old existing materials complete all as specified.

Dewatering the static water tank completely and cleaning of static water tank from bottom including removal of all vegetation, mud & leaves etc of capacity 15000 gallons, all as directed by Engineer-in-Charge.

Dewatering the static water tank completely and cleaning of static water tank from bottom including removal of all vegetation, mud & leaves etc of capacity 25000 gallons, all as directed by Engineer-in-Charge.

Forming 12mm thick & 100 mm deep expansion joint filled with preformed bituminous filler and top 30 mm primed and sealed with sealing compound, Grade ‘A’ complete all as specified.

Forming Construction joint 30 mm deep x 10mm wide filled with sealing compound grade 'A' for pavements/hardstandings complete all as specified.

Repair to exisiting rolling shutter by greasing of size exc. 4 Sqm but n exc. 7.5 Sqm each including opening top cover, removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as specified

Repair to exisiting rolling shutter by greasing of size exc. 8 Sqm but n exc. 15 Sqm each including opening top cover, removing spring etc and supply and fixing new spring, greasing the anchoring rod, refixing the top cover etc complete making the rolling shutter duly functional complete all as specified

S&F in repair Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.

Repair to existing mild steel gate of size n exc. 2.00m wide and n exc. 3.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if required all as directed by Engr-in-Charge

Repair to existing mild steel gate of size n exc. 5.00m wide and n exc. 4.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if required all as directed by Engr-in-Charge

Repair to existing mild steel gate of size n exc. 8.00m wide and n exc. 4.00m height including oiling, greasing, change of pintle hinges, brackets, bearing system, welding complete and make gate smooth functioning in all respect including taking down and refixing if required all as directed by Engr-in-Charge

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa in roof covering/cladding to wall,fixed with self tapping screws complete, all as specified.

Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in valley gutter/ridge to wall,fixed with self tapping screws complete, all as specified.

Rendering 15 mm thick on other than fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), including integral liquid WPC by wt of cement as per manufacturer instruction , complete all as specified and directed by Engr-in-charge.

Applying two coats of white wash on wall surfaces of static water tank including preparation of old surface complete all as specified.

M&L for preparation of newly plaster surface and apply two coats of exterior acrylic weather proof antifungal emulsion paint of approved brand and shade in camouflange pattern over a coat of primer all as per manufacturers instructions complete all as specified and directed.

Two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, not exc.10 cm in width or girth, including preparation of surfaces complete all as specified.

MAHAJAN TRADING CO

ANIKET TRADERS

paras ram pachiala

KARAN TRADERS

SHIVAE CONSTRUCTION

SARDALIA CONST CO

S S BUILDERS