REPAIR TO BOUNDARY WALL, FENCING, FOOTHPATH AND DRAIN IN THE AREA OF AGE B/R-II UNDER GE (W) JABALPUR AND REPAIRS TO COMPOUND WALL, HARDSTANDING, FENCING, RCC JALI AND GATE AND CLEANING AND REPAIR TO SEWAGE LINE, SEPTIC TANK AND DAILY COMPLAINT OF B

Amount

Demolition of brick work/stonework/pre cast concrete blocks built in cement mortar incl all quoins, arches, pillars etc,complete all as specified and directed by Engr-in-charge.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cm 1:6 complete all as specified and directed by Engr-in-charge

All as described in serial No 2 above except brick complete all as specified and directed by Engr-in-charge

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cm 1:6 complete all as specified and directed by Engr-in-charge

Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6,(Except brick),retrieved from item no.1, complete all as specified and directed by Engr-in-charge

M&L for Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and directed by Engr-in-Charge.

M & L for taking down cement of cement lime plaster of any description at any position on brick or stone or PCC block walls, chajja etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

M&L for rendering 15 thick on fair faces of brick work or concrete surfaces in CM 1:4 even & fair and using integral water proofing compound complete all as specified and directed by Engr-in-charge. Note: WPC shall be measured and paid seperately under relevant item.

M&L for Dubbing out average 10mm thick on irregular face of stone walls in CM (1:6) complete all as specified and directed by Engr-in-charge.

M&L for rendering 15 thick on stone masonery surfaces in CM 1:4 even & fair complete all as specified and directed by Engr-in-charge.

M & L for preparation new surfaces of wall and applying two coats of cement base paint including Priming plastered and other surfaces with alkali resistant complete all as specified

M & L for preparation of old plastered or unplastered surfaces of wall and applying one coats of cement base paint complete all as specified Note;- (i) filling of cracks,holes and dents are includes in the same rates (ii) Proper curing with water to be done before and after application of 1st coat.(iii) height upto 15 mtr

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surface.

M & L for preparation of new plasterd or unplastered surfaces of wall and applying three coat of white wash complete all as specified and directed

M & L for preparation of old plasterd or unplastered surfaces of wall and applying one coat of white wash complete all as specified and directed

Excavation in trenches n exc 1.5M wide and n exc 1.5M in depth and getting out in hard dense soil complete all as specified and directed by Engr-in-charge

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-charge

Returning filling including spreading, levelling and well ramming in layers not exc 25cm as directed by Eng in Charge

M&L Cement concrete type D-2(1:4:8) (40 mm graded stone aggregates in foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L Cement concrete type C-2(1:3:6) (40 mm graded stone aggregates in Cement concrete in surface channels and drains,complete all as specified and directed by Engr-in-charge.

M&L Cement concrete type C-2(1:3:6) (40 mm graded stone aggregates in foundations,benching, filling and mass concrete complete all as specified and directed by Engr-in-charge.

M&L for RCC(Nominal mix) type B1, (1:2:4) 20mm graded aggregates as in Columns, footings pillars, piers, posts and struts complete all as specified and directed by Engr-in-charge.

M&L for RCC(Nominal mix) type B1, (1:2:4) 20mm graded aggregates as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed by Engr-in-charge.

Providing, cement concrete Type B1 1:2:4 (20 mm graded aggregates) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates,etc,complete all as specified and directed by Engr-in-charge.

Demolition of reinforced cement concrete,roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work, reinforcement cut as req to facilitate demolition.

Providing precast cement concrete Type B1 1:2:4 (20 mm graded aggregates) in cover slab,complete all as specified and directed by Engr-in-charge.

M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,complete all as specified and directed by Engr-in-charge.

Ditto but 6mm to 8mm dia as in stirrups, complete all as specified and directed by Engr-in-charge.

M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth/roof beams; and similar work; vertical or to batter for flat and Rough finished sur faces of concrete.

M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces.

Dismantling of Trellis work (Jafri), including taking as under of battens in trellis (posts and rails measured separately),one way ,complete all as specified and directed by Engr-in-charge

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid),Type C0 1:3:6 (12.5 mm graded aggregates) set in CM 1:4, including all mouldings but excluding frame

Dismantling posts or struts (wood, steel or R.C.C.) any section,embeded in concrete, including taking out embedded portion and making good disturbed ground,complete all as specified and directed by Engr-in-charge

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard dense soil complete all as speicfied and directed by Engr-in-charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-charge

Dismantling fencing wire mesh, any type complete all as specified and directed by Engr-in-charge.

M&L Mild steel works as in posts and struts, angle iron, flat iron, Nut bolt, etc, cutting tops to shape as directed, drilling holes, all necessary drilling, bolting or riveting, etc; including embeding in concrete and screwing etc. and similar work conforming to Fe-290 Gde E-165 complete all as speicfied and directed by Engr-in-charge

M&L for plain cement concrete type B2,1:2:4 (40 mm graded stone aggregates) as in post holes,for post, complete all as speicfied and directed by Engr-in-charge,

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as speicfied and directed by Engr-in-charge

Supply only Chain link MS galvanisd fencing, any size or type complete all as speicfied and directed by Engr-in-charge

S&F,Round Bar 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips,Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified by Engr-in-Charge

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)

S&F in repair Punched tape concertina coil made out of low carbon strip duly electro galvanised, dia of wire not less than 2.59 mm, dia of coil 600 mm (appx) when closed with all necessary clips and RBT wire to connect with angle iron or bracket with all accessories (6 RM coil weighting not less than 15 kg stretched to not more than 10 RMhaving not more than51 circles/turn) complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat synthetic enamel paint over a coat of red oxide primer etc complete all as specified.

M &L for preparation of old painted steel surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint of any tint all as specified and directed.

S&F in repair mild steel, Fe 410-W (Gde E- 250 quality-A) Framed work as in doors or gates,roof structure of any size and section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging;as in gate including all necessary fitting, also fastening and fixing,including dismantling, complete all as specified by Engr-in-Charge

M&L for Granite tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed of CM (1:4) , as in tread and riser of staircase,steps , jambs, pillars, window- cills, complete complete as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engr-in-charge.

Demolition of cement concrete (unreinforced) in ground floor or pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.

Dismantling of Stone slabs and kota stone,Cuddappa stone, Granite, Chequered tiles, Paver block, etc of any description or thickness in floors, aprons etc. laid bedded and pointed in any cement mortar complete all as specified and as directed.

M & L for 25 mm thick PCC 1:2:4 type B-0 using 12.5mm crushed stone aggregate as in leveling course Iincluding demolition of existing PCC complete all as specified and as directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) as in sub base of floor 100 mm thick

M&L Cement concrete (1:3:6) type C-2 using 20 mm graded stone aggregate as in sub base, 75 mm thick, complete all as directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L for Chequered cement concrete tiles, with grey cement and pigment 30cm x 30cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM (1:4) all as specified and directed.

Blank

Material and labour for 60mm thick machine pressed glossy finish precast concrete interlocking paver block any shape and size & Colour M-40 grade with grey cement and pigment confirming to IS 15658-2006 laid over and including 50mm thick cushioning of river sand/M-sand complete all as directed by Engr-in-Charge.

M&L Cement concrete type C-2(1:3:6) (40 mm graded stone aggregates) in benching, foundations, filling and mass concrete complete all as specified and directed by Engr-in-charge.

Demolition of PCC of any description & in any position not otherwise specifically provided for (unreinforced) complete all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 100 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm and above internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipes of 150mm ( Salt glazed ware,AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-charge.

Demolition and breaking up drain pipes of 600mm ( Salt glazed ware,AC or Reinforced concrete) set in cement mortar complete all as specified and directed by Engr-in-charge.

Reinforced concrete pipes, class NP3, 150 mm dia laid and jointed complete with collars,complete all as specified and directed by Engr-in-charge

Reinforced concrete pipes, class NP3, 600 mm dia laid and jointed complete with collars,complete all as specified and directed by Engr-in-charge

Clearing of all blockages in sewer line of any type and dia of sewer lines, manholes of any section and any depth, in any situation by way of cleaning/desludging foreign materialsm by mechanically including desludging where required and as ordered by Engr-in-Charge and keeping sewer line functional from floor traps, water closet, soil waste/vent pipe, gully trap upto final drop /outlet into septic/central sewage system terminating in other joining zone/area or into sewage well complete all as specified and directed. Note :contractor should be deployed Min. two Team with T&P and mechanical equipments shall be provided by contractor on each working day for 08 hours per day to clear the blockage of sewage line/manhole on day to day complaint basis by users. and Area are following : Raghbi Ground, Mall road, Cobra Mess and interconneted areas thammiya Manson ,DSOI,Swimming pool, GOC House, Station GYM, Kler Enclave, Station cell, HQ MB Area ,2TTR, Cobra canteen, Robbert Berrack.,Signal company , Cobra canteen, MM line , Vikram Batra ,Vinay Rao Enclave, Adhikari Enclave , Mainkshaw enclave , MES Colony, Sardar Mess, RTZ Zone

M&L for removal of blockage of WC, WHB, bottle trap, floor trap/ Nahani Trap, soil & waste pipe, running on extranal walls of Bldgs including removing and refixing of Cap up to 4 storey building complete all as specified and directed by Engineer-in-Charge.

Cleaning of Gulley Trap including removing GT cover, cleaning of Sludge, earth and all sewarage material flush with water and refixing the GT cover complete all as specified and as directed.

Dewatering of existing septic tank, manually or using mechanical appliances including removal of sludge to a distance not exc 1 KM out side of ministry land / defence land at isolated places, complete all as specified and as directed inciduing excavation in trenches not exc. 1 5m in dept in mud in fould poistion by de-sludging, disilting and getting out all silt, sludge, organic and inorganic materials by manuyally / mechanically and removing the sludge to a distance exc 250 mtr but not exc 500 mtr away from site and burrying in to pits and covered with earth including spreading bleaching powder @1 kg per sqm complete all as directed at site. After complete cleaning of septic tank the manhole cover shall be re-fixed in same position with CM 1.4 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site Note Item shall be operated when septic tank are over flowing with sludge This aspect shall be verified Engr-in-Charge in respect of every septic tank before allowing the contractor for cleaning of the same.

Desludgeing of existing septic tank, manually or using mechanical appliances including removal of sludge to a distance not exc 1 KM out side of ministry of defence land at isolated places complete all as specified and as directed inciduing excavation in trenches not exc. 1.5m in dept in mud in fould poistion by de-sludging, disilting and getting out all silt, sludge, organic and inorganic materials by manuyally / mechanically and removing the sludge to a distance exc 250 mtr but not exc. 500 mtr away from site and burrying in to pits and covered with earth including spreading bleaching powder @ 1 kg per sqm complete all as directed at site. After complete cleaning of septic tank the manhole cover shal be re-fixed in same position with CM 14 and bleaching powder spread on top surface of septic tank @ 1 Kg per septic tank complete all as specified and directed at site. Note Item shall be operated when septic tank are over flowing with sludge. This aspect shall be verified by Engr-in-Charge in respect of every septic tank before allowing the contractor for cleaning of the same.

Note for Ser No 69 & 70:-Necessary tools , plants & machinery for Cleaning of Septic Tank by Hony Scruber Machine either required to be purchased by the contractor or hire from MCJ by the contractor without any extra cost to the govt and no extra cost be paid on this account.

Cleaning of sewage line including manholes by removing MH covers, removing of accumulated liquid, sludge/sediments by mechanical means, transporting the fluid/sludge etc in covered containers by mechanically and burying the same in pits away from domestic premises, where directed including necessary excavation refill and disposal of surplus soil etc complete, cleaning with fresh water, placing the MH covers intact in position all as directed by engr-in-charge ( Rate quoted will be counting of MH for making payment and no extra will be paid for seawge line. ) for :-

Manhole depth not exe 1.0m

Manhole depth exe 1.0m not exe 2.0m (Rate included for total depth of manhole )

Manhole depth exe 2.0m

Note for item no. 72 :- -Necessary tools , plants & machinery for Cleaning of Septic Tank by Hony Scruber Machine either required to be purchased by the contractor or hire from MCJ by the contractor without any extra cost to the govt and no extra cost be paid on this account.

Desilting and cleaning of existing storm water drain by removing silt, soil, vegetation growth and removing of rubbish from the premises all as directed by Engineer-in-Charge. Note : silt obtained shall be stacked for measurement and payment

Cleaning of blocked rain water pipe of dia 100-150mm of buildings & near path drain and rubbish off the premises.

Note for Item no 66 to 75: (i) The rates quoted in the above item include the cost of T&P like Cleaning Rod, Bamboo spade, sewage Cleaning/Pressure Machine with loader etc complete. (ii) The lines measured once cannot measured again within 3 months. If blocks in the same lines re-occur within 3 months the contractor shall not be paid extra for the same. (iii) Minimum 4 persons shall be deployed by contractor and they shall be present on all days for attending the complaints of cleaning sewage/Blockage. The complaints shall be detailed by JE/AGE concerned. In case of non attending of complaints within 12 hours the recovery @ Rs 100 per complaint shall be made from contractors dues. (Date and time in Complaint Slip is only the criteria of recovery of non attending blockage complaint) (iv) Recovery made by Engineer -in-Charge will be final and binding for non attending sewage complaint.

Excavation in trenches not exceeding 1.5m wide for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and exceeding 1.5m depth but not exceeding 3.0 depth in soft / loose soil etc complete all as specified and directed.

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out soft/ loose soil complete all as specified and directed

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 100 mm bore of pipe with cement concrete 1:3:6 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:3:6 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:3:6 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 100 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 150 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

M&L for SGSW drain pipes laid in trenches of 200 mm internal diameter of pipe and jointed as specified complete all as specified and directed.

Cutting opening around floor trap(wall junction ) nahani trap and repairing joint leaking using cement slurry include replacing the damaged traps and making good the surface to match with adjoining area and ensure leak proof joint complete all as specified and directed.

Repairs to existing leakage of pipe joints of CI,AC,and PVC pipes by cutting out leakage portion and refitting the same with cement or solvent and ensure leak proof joints /junctions of any bore of pipe complete all as specified and directed.

M&L broken bricks of guage not exceeding 63mm for loose fillling in soakage pit, soakage wells including removal of old unservicble brick bats from soak well of any description complete all as specified and directed

M&L for rendering 15 mm thick on brick work or concrete surface in CM 1:6 finished fair& even surface complete all as specified and directed.

Supply only liquid water proofing compound ISI marked.

M &L two coats of OBD including preparation of surfaces over a coat of Birla wall care putty complete.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and directed.

ditto but 75mm bore complete all as specified and directed.

ditto but 40 mm bore complete all as specified and directed.

S&F 100mm dia Stack clampsout of 50 mm by 5 mm flat iron and 16 mm dia around iron stays including bolts and nuts and securing ends of stays to wall or roof making good all respect complete as directed and specified. Rate shall be included all work upto four storey .

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed.

S&F PVC (SWR) bends ISI marked any radius of 40 mm bore without access door complete all as specified and directed.

S&F PVC (SWR) junction single, (single T or Y) equal or un equal of 110 mm bore of pipe complete all as specified and directed

S&F PVC (SWR) junction single, (single T or Y ) equal or un equal of 75 mm bore of pipe complete all as specified and directed

M&L for PVC (SWR) mulit trap 75 mm, setting and jointing with solvent cement complete all as specified and directed

S&F SGSW gully trap 150 x 150 mm, setting and jointing with cement mortar including taking down existing gully trap & fixing new with PCC 1:3:6 type c1 in 400 x 400 x 150 size block complete all as specified and directed

Supply, laying and jointing 150 mm nominal bore DWC(HDPE double wall corrugated), socketed , sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-8 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed. .

Supply, laying and jointing 200 mm nominal bore DWC(HDPE double wall corrugated), socketed sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-8 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed. .

Supply, laying and jointing 300 mm nominal dia DWC(HDPE double wall corrugated), socketed sewage pipes having 6.0 M length, conforming to IS 16098 (Part-2) of SN-8 Stiffiness with and including necessary jointing matrials etc complete all as specified and directed. .

S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

S&F in repairs, SFRC MH Frame with cover of size 600mm x 450mm x 70mm thick srounded with steel strip 70 x 1.5 mm Reinforced as per manufacturer's design in Manufactured proccess laid over existing Man hole complete all as specified and as directed by Engr-in-Charge. Notes: - (i) Contractor shall provide PV alongwith manufacturer test certificate of SFRC cover.

All as per item No 107 above but MH frame with cover of Size 600x600x70mm

All as per item No 107 above but GT frame & cover of Size 300x300x50mm.

M&L Formwork to Soffiting of Suspended slab such as roof slab,floor slabs landing and similar work not exceeding 200 mm thickness as directed by Engr-in-Charge

M&L for RCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) as in slab supported on wall, beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work including demolition of existing RCC slab of MH of any description complete all as specified and directed.

S&F in repair PTMT bottle trap 32mm bore for wash hand basin with inlet & outlet screwed for pipes or connection incl necessary packing union and cap complete all as specified and directed by Engr-in-charge.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge

S&F in repair vitreous china semi-pedestal pattern (Anglo indian type) (excludig flushing cistern & flush pipe) withcast iron trap portion to match with the existing surface of floor all as specified and directed by Engr-in-charge

M&L Wash down water closet vitreous china white pedestal pattern with 'P' or 'S' trap including connecting to outgoing drain pipe & to flushing pipe excluding flushing cistern, flush pipe & Seat and cover for padestal complete all as specified and directed.

S&F repair plastic water closet seat cover white/ black closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device all as specified and directed by Engr-in-charge.

S&F in repair Health faucet, complete all as specified and directed.

S&F vitreous china wash basin white flat back size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets all as specified and directed by Engr-in-charge.

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for non skid ceremic cooloiured tiles7 to 8 mm thick set and jointed in neat cement slury and pointed in white or coloured cement to match over 15 mm thick screed bed in cm 1:6 complete all as specified and directed

Material and labour for Glazed ceramic tiles of size 450X 300 X 7mm thick in vertical surfaces such as dado/ skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 all as specified

Trenchless excavation for cross the road , path and hardstanding or other type of structure by mannually or machine for dimeter 350 mm including supply and laying HDPE pipe 300 mm dia complete all as specified and directed by Engr-in-Charge.

S & F in repairs PVC High/Low level flushing cistern 10 litrescapacity including all fittings I.e float valve, syphon, flushpipe,brackets all as specified and directed by EIC.(215.40+2495.70 )

M&L for providing pre cast cement concrete 1:2:4, Type B-1 using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM 1:6:complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick as in plinth protection & court yard laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed.

M&L for ready made precast cement concrete louvered and jali 40-50 mm thick of approved design set in cm 1:4 including all mouldings all as specified and directed by Engr-in-Charge.

Demolition of RCC jali in any description in any position all as specified and directed by Engr-in-Charge.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of weather proof paint over a coat of primer and including 2 coat of waterproof putty complete all as specified and directed.

M&L plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate for coping, benching,coving, bed block for flooring, rungs, window cills etc complete all as specified and directed by Engr-in-charge.

S&F for 1.25mm thick mild steel, plain, black sheet in hearths; covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and directed.

Blank

S&F Mild steel posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

S&F, Mild steel screw bolts 12mm dia (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 10cm complete all as specified and directed.

Supply & fixing in repairs frame work for railing fixed to wall/ floor made with 50 mm/40mm/30mm stainless steel (202) pipe including cutting & necessary welding complete all as specified and directed.

Welding in repairs n. exc 2.5cm in length for fixing of door hing, door spring , welding as in iron doors (one welder with helper as per requirment base must be depolyed with thin 24 hours . Other wise penalty per Day 500 / Rupees)

Blank

M&L for coloured rubber moulded cement concrete chequered tiles 300x300x25 mm thick with cement and coloured pigment, set and jointed in neat cement slurry and pointed in coloured cement to match as in floors including 15mm thick screed bed to floor finishes in cm 1:6 complete all as specified and directed.

M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Removing building materials to a distance of 250 mtr to 500 mtr beyond the lead incl in the rates incl loading, unloading and stacking at the destination complete all as specified and directed.

M & L for RCC precast NP 2 pipe 450 mm dia laid and tested in trenches including dismantling of old pipe of any description specified.

M & L for PCC (1:3:6) type C2 as in 450 mm dia cement concrete NP 2 pipe concrete bed to drain including packing under and haunching against the side of pipe after they are laid and tested all as specified.

Taking down wooden frames with shutter / Jafri gate (without taking off shutters from the frame) n exc 10 sqm each and removing to store complete all as specified and as directed .

Schedule of credit amount of Rs. 2,00,850.00 to be deducted during AOC

S R BUILDERS AND SUPPLIERS (BID ID -3508254)