Renovation Upgradation civil and electrical work of Room No 128 Beam hall Stores area

Dismantling doors, windows and clerestory windows (steel/ wood/aluminium) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 250 metres lead as directed by IUAC Engineer

Dismantling existing air duct of dia. /periphery of approx. 3 feet made up of steel sheet ( 2 mm thick) along with MS angle etc , complete work in sections including dismembering and stacking within 250 metres lead of GI sheet duct along with Channels, angles, tees complete as per direction of IUAC engineer .The height where duct is fix are approx. 3.4 meter from the from G.L .No extra payment to be made later for special arrangement to be made at such height for removal of duct and dispose /stacked of the same to existing central junk yard /store area within IUAC campus complete as per direction of IUAC Engineer. Note: Structural frame work for duct including MS angle frame is existing on site & weight of the ACP duct sheet along with MS section only shall be measured for payment). Note: Contractor may see the site before quoting rate to see the actual condition of work/site.

Dismantling existing false ceiling (made up of fibre mineral board and gypsum board) including runner and tee etc., and stacking the material within 250 metres lead of as directed by IUAC Engineer.

Demolishing brick work (made up in cement mortar) manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

P/L 15 mm cement plaster of 1:4 (1 cement: 4 coarse sand) on brick work complete as per direction of Engineer-in-charge

Providing and laying in position cement concrete of 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) grade including the cost of centring and shuttering.

Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer's specification.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and including two coat of syanethetic enamle paint all complete.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia. and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately): Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron)

Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete: Upto 5mm depth and 5 mm width

Providing and fixing factory made uPVC white colour fixed glazed windows/ ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners; mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.: Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area up to 0.75 sqm.) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners; mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.: Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.10 sqm) Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.

Providing and fixing aluminium handles of size 125mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)

Providing and fixing aluminium hanging floor door stopper (twin rubber), ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868)

Providing and fixing bright finished 100 mm mortice lock with 6 levers of approved quality for doors, with necessary screws etc complete as per direction of Engineer- in-charge.

P/A EPU patching compund (Cipycrete of Cipy Polymenrs or equivalemnt of Asain, Sika, Fosrock) for floor repair /crack after removing loose patches/glass strip of floor (which are not repair able by simple mortar /putty) before P/A epoxy coating wherever directed.

Providing and laying Epoxy floor coating to flooring and skirting surface in Lab/Room as per below mentioned items. (i) Chemical cleaning of the surfaces with Chemistic Florklin (or equivalent) mixed with water allowing 15-20 minutes for reaction time, then rinsing the area thoroughly and allowing to dry (ii) Cleaning the existing glass strips, joints and existing damaged concrete floor holes, patches etc. with wire brushes of dust and loose material and repairing the same with Epoxy putty (of reputed makes like Chemisol, Fosroc ,MRF or equivalent) mixed with silica sand and making it smooth and even to take the epoxy floor coating. (iii) Grinding with hand grinding machine to clean the the existing cement concrete flooring and removing any loose material and dust particle and applying one coat of Epoxy primer (of reputed makes like Chemisol, Fosroc, MRF or equivalent) on the prepared surface. (iv) Applying two coats of dust proof solvent free epoxy floor coating/screed in average 2 mm (1 mm + 1 mm) thickness (of reputed makes like Chemisol, Fosroc, MRF or equivalent) over the primed surface of approved colour to make the surface dust proof, water proof, chemical resistance and Abrasion resistance. Note (I) Bidder may visit the area and see the actual condition before quoting). (ii) Epoxy colour theme will be decided in consultation with IUAC. No extra will be paid for using 2 or 3 colours at designated locations. (iii) Making yellow lines at designated places will be included at no extra cost.

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.

Applying priming coats with water thinnable cement primer on wall surface having VOC content less than 50 grams/litr of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing, fabricating, supplying installing and fixing in position Aluminium Composite Panel Cladding, of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. with open grooves for linear as well as curvilinear portions of the cabin , of approx 3 meter heights. Base frame work for ACP cladding is payable under the relevant aluminium items. The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face with Aluminium Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade I Type II, in panelling fixed in aluminium doors/windows/partition frames with C.P. brass / stainless steel screws etc., complete as per drawings. Pre laminated particle board with decorative lamination on one side and balancing lamination on the other side.

Providing and fixing glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both sides, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete

Providing and fixing bright /matt finished Stainless Steel handles 100mm of approved quality & make with necessary screws etc all complete.

Providing and fixing magnetic catcher, triple strip vertical type of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete

Providing and fixing heavy duty aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossedb on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete.

Providing and fixing aluminium tower bolts 200x10, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete.

Providing and fixing SS 304 rod of 20 mm dia. Providing and fixing SS 304 curtain rod having wall thickness of 1.25mm with two SS 304 brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete

Welding by gas or electric plant including transportation of plant at site etc. complete.complete as per direction of Engineer-in-Charge.

Credit for taking away old dismentallred damaged MS doors /cupboard shutter , MS section, GS roofing sheet including other electrical ,water supply material from dismenttlling shall be property of contractor ,after dismentlling weight to be measured before removing from the site in the presence of IUAC engnieer /in charge or his autthorised representative shall be taken for credit all complete . The all tools tackles ,labour for dismentaling,stacking and transporting to be bear by the contractor for all this credit items .

Providing and fixing transparent PVC strip curtain made of vinyl plastic strips of minimum 3 mm thickness with necessary hangers, brackets and supporting arrangement for fixing above door openings, including cutting, overlapping, labour and all incidental works, complete for preventing dust entry while maintaining cross ventilation inside the room, as directed by Engineer-in-Charge, IUAC.

Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 min Fire Rating confirming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6mm thick G.I. sheet (zinc coating not less than 120gm/m²) duly filled mineral wool insulation having density min 96 kg/ m³ and fixing with necessary stainless steel ball bearing hinges of size 100x89x3mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-charge (panelling not to be paid for seperately).

Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet ( Zinc coating not less than 120gm/ m²) suitable for mounting 120 min Fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool Insulation having density min 96Kg/m³ . The frame will have a provision of G.I. Anchor fastners 14 nos ( 5 each on vertical style & 4 on horizontal style of size M10 x 80 ) suitable for fixing in the opening along with Factory made Template for SS Ball Bearing Hinges of Size 100x89x3mm for fixing of fire rated glazed shutter . The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- charge . (Cost of SS ball bearing hinges is included).

Providing and fixing approved make Fire Rated Vertical Rod Panic Exit Device (Panic Bar/Crash Bar) suitable for double leaf, of fire rated steel door, conforming to EN 1125/UL 305 or equivalent standards, complete with top and bottom locking rods, horizontal touch bar, latch assembly, strike plates, dogging mechanism (where applicable), stainless steel lever/operating mechanism, all fixing screws, brackets, anchors, accessories, testing, commissioning and proper functioning, complete as per manufacturer's specifications and direction of Engineer-in-Charge. The rate shall include all labour, T&P, transportation, incidental charges and complete installation. Approved makes: Dormakaba/Godrej/Dorset/Ozone/ASSA ABLOY/Yale or equivalent approved. Warranty: Minimum 02 years.

supplying ,installation ,testing and commissioning 595*595 mm (N.S) LED panel having greater than 4000 lumen ,efficacy>110 lumens/watt suitable for 2'x2' cut out complete with all accessories and driver etc,i/c connection with 1.5sqmm PVC insulated copper conductor wire connector and suitably installed with the help of suspension wire/chain wherever required of make Phillips/Havells/Crompton/Bajaj, complete as reqruired as per direction of Engineer-in-charge

Total (Excluding GST)

GST to be paid extra as applicable