ADDN /ALTN TO AC SHEET IRON JOINERY TILLING AND HARD STATNDING BLDG NO P 237 MDC INCLUDING SPL REPAIR TO INTERNAL ROAD OF AJAMER SINGH ENCLAVE AND PATHAK ENCLAVE AT GMS UNDER GE I GOS

Amount

Dismantling of Asbestos Cement (Corrugated, Semicorrugated, etc.) sheets in roof coverings. Complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified & directed.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws Complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for. Complete all as specified & directed.

S&F at Roof trusses (framed), trussed, purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. of Fe410-W (Gde-E-250) quality-A. Complete all as specified & directed.

M&L for preparation of new or previously untreated surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & directed.

M&L for preparation of old painted surfaces of any description, over 10 cm in width or girth, not otherwise described & applying two coat of synthetic enamel (ordinary tint) over & including one coat of red oxide, zinc chrome primer. Complete all as specified & directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) Complete all as specified & directed.

M&L for PCC 1:2:4 type B2 using 40 mm graded stone aggregate in foundations, filling, floor, hardstanding & mass concrete. Complete all as specified & directed.

M&L for forming construction joint 90 mm deep × 10 mm wide filled with grade 'A' sealing compound. Complete all as specified & directed.

Dismantling of floor, hearth or walls tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off permises. Complete all as specified & directed.

M&L for glazed ceramics coloured tiles of size 350x250x7mm/ 450x350x7mm thick in vertical surfaces such as skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces. Complete all as specified & directed.

M&L for 10 mm thick plaster in cement mortar 1 : 4 for fixing of wall tiles. Complete all as specified & directed.

Taking down chowkats or frame with shutters of any description (without taking off shutters from the frames) not exc 1.50 Sqm each. Complete all as specified & directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc, but excluding ashlar facings, dressed stone work & precast concrete articles. Complete all as specified & directed.

M&L Brick work with Old size Fly Ash bricks straight or curved on plan exc 6m mean radius built in CM (1:6). Complete all as specified & directed.

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:6), finished even and smooth (without using extra cement). Complete all as specified & as directed.

M&L for preparation of newly plastered wall or concrete surfaces & applying two coats of cement base paint on wall or concrete surfaces over & including a coat of primer on prepared surfaces. Complete all as specified & directed.

Demolition of Reinforced Cement Concrete of any description & in any position not otherwise specifically provided for. Complete all as specified & directed.

M&L for Providing Precast Cement Concrete 1:2:4 type B-1 using 20mm graded stone aggregate in window or door cills, lintels bressumers, steps, quoin blocks (for use with masonry) string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bounders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. & setting in 1:6 cement mortar complete with joints to match including necessary formwork if required. Complete all as specified & directed.

M&L for TMT Bars 10mm dia & over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.90mm dia or securing with clips. Complete all as specified & directed.

M&L for Repair to pot holes any depth, not exc 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth, and making good by applying tack coat @ 5 Kgs per 10 Sqm and laying premixed bituminious macadam well rammed and sealed with paving bitumen 60/70 or VG-30 grade@ 9.8 Kgs per 10 Sqm, blinded with 0.09 Cum of stone chipping of size 6.3mm and again well rolled with 8 to 10 tonne power roller (Iincluding supply of pre-mixed macadam, binder and chipping) depth of pot holes exc 30mm complete all as specified and directed.

M&L for Preparing existing black top surface or bituminous macadam surfaces by brushing with brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc on back top/concrete surfaces than applying evenly priming tack coat with paving bitumen 60/70 or VG-30 penetration over the prepared surface by mechanical sprayer @ 5 Kgs/10 Sqm of surface area complete all as specified and directed.

M&L for applying bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) with 5.5% binder content of paving bitumen 60/70 or VG-30 grade by weight of total mix including cement filler, on surfaces rolled & compacted with using 8 to 10 tonne capacity power roller to achieve the required compactness, camber and gradient mixed in hot mix plant using design mix and laid by mechanical paver finisher. Complete all as specified and directed.

M&L for premixed bituminous macadam laid, rolled and compacted to required gradient and camber n.exc 75mm thickness (consolidated thickness) with 4% binder content of VG -30 by weight of total mix, mixed in hot mix plant and laid by mechnical paver finished Complete all as specified & directed.

M&L for preparation of existing bituminous surfaces, removing, dust, dirt grease and other foreign matters etc to receive the marking and M&L for thermo plastic (Reflective) line marking having 1.0 mm thickness (average) of uniform surface finish conforming to BS 3262 (Part 1) 1989 read in conjunction with the MOST specification 803 clause 4.2.2 on bituminous surfaces in white/yelow clour and super imposed with glass beads confirming to BS 6088 read in conjuction with and MOST specification 803 clause 4.3.3 complete all as specified and directed. Note - MOST specification 803 shall be followed strictly for execution of work & suitable machine shall be used for the marking as approved by the GE. Shape & size/ patterns of marking shall be as approved by the GE.

S&F in repair cat eyes/road studs for roadways sign permanent surface mounted type having tough poly carbonate micro replicated corner cube reflector lenses with a protective abrssion resistant ceramor coating having body of weather proof and impact resistant thermoplastic complete as per manufacturer,s instruction and as directed. (Colour :- Yellow/Red/Amber) Make: Series 290 of 3M or Road Star or Equivalent of higher cost.

S&F in repair solar cat eyes/road studs size (mm) 125L x 125B x 25H including stem height 53mm approx housing dia cast aluminium (grade LM-6) fully water proof and weather proof and weatherproof coating visible distance upto 400mtr LED-6 super bright amber led (3 Nos each side) yellow charged, flush frequency 1.2 Hz-1.8Hz including solar panel 3.5V/110MA & battery one PC sub ‘C’ type Ni-Cd rechargeable battery 1.2V/2.5AH temp range 20C to 70C fixed on road for roadway sign complete as per manufacturer’s instruction and directed. Make- 3M/Avery Dennision/Dark Eye/Green/Greenlite/Road Star Cat Part No. GSR-909 or Equivalent of higher cost

S&F in repair ABS Body, 100 cm outdoor convex mirror good quality as approved by GE fixed in road/ground portion complete including hanging/fixing arrangement with adequate mounting arrangement at suitable height, having unbreakable Polycarbonate Convex Lens with hoods as the traffic safety mirror for eliminating blind spots & increase visibility at a broader angle, including excavation for post holes, PCC Type C-2 1:3:6 (using 40 mm graded stone aggregate) in post hole & removal of surplus excavated material to a distance not exceeding 50 metre & depositing where directed at a level not exceeding 1.5 metre above the starting point. Complete all as specified & directed. Make: Frontier 100 cm outdoor Convex Mirror, FMCO-100, Road Star, Real reflectors, Alexix, ACE polymers (India) or Equivalent of higher cost

M/S SIWALIK AND CO

M/s MAA BHAIRABI ENTERPRISES

M/S JAGANNATH SASMAL

G.KRISHNA MURTHY AND PARTNERS

DHABALESWAR ENGINEERING WORKS

HARAGOURI SUPPLIERS