93/EDCB/2023-24

Amount

The work of safe carriage of the following material from store center Nawada to work site under the jurisdiction of EDD-III (Bisauli), Budaun Approx. distance upto 0-60 Km. Including safe loading and unloading.

11/0.4 KV 25 KVA T/F

11/0.4 KV 63 KVA T/F

11/0.4 KV 100 KVA T/F

PCC Pole Support 8.5 Mtr. Long

11 KV MS T-Off Channel

Top Channel (125x65x2240 mm)

S/S Base Angle (75x75x6x2028mm) bolt & Nut

11 KV Disc Insulator Composite 45 KN (T&C Type)

11 KV Pin Insulator Composite

11 KV X-Arm V Type

11 KV TPMO

ACSR Weasal Conductor

LT XLPE Cable 3.5x70 Sqmm

LT XLPE Cable 3.5x150 Sqmm

Stay Complete

Earthing Complete

ABC Cable (3x95+1x35+1x16) sqmm

ABC Cable (3x50+1x35+1x16) sqmm

3 Phase Distribution Box

Construction/Erection of Double Pole (except pole) Suitable for following T/Fs including fitting of all accessories (All necessary clamps, Nut & Bolts etc. shall be provided by the contractor for execution of work as per RESSPO Norms).

11/0.4 KV 25 KVA T/F

11/0.4 KV 63 KVA T/F

11/0.4 KV 100 KVA T/F

Mounting of following T/F,s as per norms complete in all respect -

11/0.4 KV 25 KVA T/F

11/0.4 KV 63 KVA T/F

11/0.4 KV 100 KVA T/F

Erection of Single PCC 8.5 Mtr. Long in H.T/L.T lines including fitting of all accessories as per RESSPO Norms (All necessary clamps, Nut & Bolts etc. shall be provided by the contractor for execution of work as per RESSPO Norms).

Grouting of PCC 8.5 Mtr. Long with 1:4:8 mixture in size(450x450x1500mm.) including cost of cement/C.C. & sand Required as per RESSPO Norms. (All Grouting material shall be provided by the contractor).

Laying, Stringing, Sagging & Jumpring of Following Conductor complete in all respect as per RESSPO Norms.

ACSR Weasal Conductor

LT XLPE Cable 3.5x70 Sqmm

LT XLPE Cable 3.5x150 Sqmm

ABC Cable (3x95+1x35+1x16) sqmm

ABC Cable (3x50+1x35+1x16) sqmm

Erection/Fixing of stay set with stay wire and clamp as per RESSPO norms including binding. climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and C.C. and sand etc. as per RESSPO norms. All the grouting material shall be provided by the contractor.

The work of driving the earthing electrode and making connections with GI wire.

Installation, Fixing & Fabrication of 11 KV fuse set (Including Cost of Fuse set) Installed on midway of 11 KV double pole structure with mention material specification (MS Channel 100x50x2028mm), Iron Strip (50x5x305 mm) & Fuse wire of required capacity etc. shall be provided by the contractor for execution of work as per RESSPO Norms.

Fixing of danger board on each location and G.I. barbed wire including proper clamping as per RESSPO Norms. (Danger Board shall be provided by the contractor as per details given in S.No. 14 as per RESSPO Norms).

Erection & Fixing of 11 KV TPMO set with handle on existing double pole including providing of clamps and nut & Bolts and jumpering of both side by TPMO complete in all respect.

Errection and commissioning of 3 Phase Distribution Box on the LT Poles (All the material required shall be arranged by the contractor for errection and commissioning of distribution boxes except distribution box).

The following Decentralized material shall be provided by the contractor for execution of work as per RESPO Norms (the material shall be purchased from approved vendor of Discom).

Holding Clamps for S/s with Bolt & Nuts

Holding Clamps for LT T-OFF

11 KV F Clamp with Nut & Bolt

X-Arm Holding Clamp with Nut & Bolt

Stone Pad

Danger Board

Barbed Wire

3 Phase Distribution Box Clamps

Piercing Connector

LT Shackle Insulator

N&B for Shackle Insulator

LT Clamps with N&B for Shackle Insulator

Al. Lugs for 150 KV Sqmm Cable

LUGS OF Suitable Size (70 sqmm)

Stay Insulator

DURGESH CHANDEL