Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.1 LAccepted-AOC 763 MAIN ROAD BABINA CANTT JHANSI UP 284401 | JHANSI | JHANSI | UTTAR PRADESH | 284401 | L1 | Accepted-AOC Being a L1 bidder | |
| 2 | L2₹34.8 L+₹5,184 (0.15%)Rejected-Finance 1010 NANDANPURA BABINA CANTT DIST JHANSI 284401 | BABINA CANTT | JHANSI | UTTAR PRADESH | 284401 | L2 | Rejected-Finance Not being a
lowest
tenderer |
Tender Value
₹42.0 L
EMD Value
₹83,950
Closing Date
29 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE BABINA
GE BABINA CANTT 284401
CERTAIN SANCTION WORKS (05 Nos) IN AGE BR-II AND AGE EM UNDER GE BABINA
2022_MES_533983_2
GE/BAB/TOKEN/19 OF 2022-2023
Open Tender
Civil Works
Item Rate
184 days
GE BABINA
AS PER TENDER DOCUMETNS
8 documents required · 8 mandatory
₹500
GE BABINA
₹83,950
Yes
31 Oct 2022
7 Sept 2022
6 Oct 2022
7 Sept 2022
29 Sept 2022
15 Sept 2022
Amount
Excavation in trenches in any type of soil not exe 1.5 mtrs wide and not exe 1.5 mtr in depth for laying of pipe/cables etc and getting out incl forming bottom surface to the required level/slope etc complete all as specified and directed.
Excavation in post holes (or similar holes) each not exc 0.5 cum , getting out in any type of soils and removing surplus soil to a distance not exc 50m and as directed.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil comlete all as specified and directed.
Returning, filling in, including spreading, watering and well ramming in layers n. exc 25 cm thick in any type of soil complete all as specified and as directed.
Removing excavated soils/material to a distance n exc 50M and deposited where directed at a level n. exc 1.5M above the starting point complete all as specified and as directed.
M&L for moorum laid in layers n exc 15 cm thickness , spread ,levelled , rammed and watering as in floors etc complete and all as specified
M&L for hard core of broken boulders/stone of gauge n exc. 63 mm, deposited, spreading, leveling watering and well ramming to true surface in layers not exceeding 15 cm thick each layer complete all as specified and directed.
Demolition of brick work/stone masonary built in cement mortar of nay description , any position and any location and as direcetd
M&L for brick work with Fly Ash bricks ( FASB) straight or curved on plan exc 6 M radius built in cement mortar (1 : 4) etc complete all as specified and as directed.
M&L for PCC 1:3:6 type C 2 using 40mm graded stone agg as in filling and mass concrete , Sub base/flooring complete all as specified and directed.
M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregates as in foundation filling etc complete all as specified and directed.
M&L for PCC 1:2:4 type B-2 using 40mm graded stone agg as in filling and mass concrete, sub base/flooring complete all as specified and directed.
M & L for PCC work of flexural strength of 40 Kg/Sqcm using cement 400kg /cum as in pavement , floors & hard standing, laid in panels not exceeding 30 sqm each , panel shall be formed using mild steel members of adequate size and thichness to create 10 mm wide joints , surfaces of concrete finished even and fair to desire level etc complete all as specified and as directed. Note : (i) Cost of sample testing for design mix to ensure flexural strength 40 Kg /sqcm will be borne by the contractor . Min cement content shall be 400 kg/cum of concrete . In case cement required more than 400 kg shall deemed to be included in the quoted rate and nothing extra shall be admissible on this account . (ii) Joint shall be measured and paid seperately .
M&L for forming construction joint 10mm wide x 30mm deep and filled with sealing compound Grade 'A' etc complete as directed
M & L for precast RCC 1:1.5: 3 Type A-1 using 20 mm graded stone aggregate as in lintel upto 1.50 mtr span etc complete all as specified and as directed. Note : Reinforcement shall be paid seperately
S&F, 2nd class hard wood ( SAL ) as in scantling, wrought timber frame work as in members of trusses like rafter ,purlins etc similar etc complete and as directed. Note : The moisture and species test is manadatory prior to used timber and shall be got tested from Govt lab or from NIBL approved lab . No payment of timber shall be made unless got tested and test results thereof found satisfactory
M&L for mild steel TMT bars 8 mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hookingends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and directed .Make : As specified in tender documents
S&F mild steel work as in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 grade St-240 with and including one shop coat of zinc chrominium primer paint complete all as specified and as directed.
S&F mild steel work as in Roof trusses ( framed ) trussed , purlins , crane gentries rails and fastenings and heavy brackets framing ( Beam,Tee,Angle, Channel or flat sections ) incl distance pieces ,cleats etc of 290gde - E-165 etc complete all as specified and as directed. Make : As specified in tender documents
S &F mild steel hold flat iron 40x5 mm thick as in wind tie over roof including securing bolts including driling holes etc complete and as directed Make : As specified in tender documents
S&F mild steel ( Plain) plates , square cut or notched (ordinary and counter sunk) forming holes of suitable dia if required and fixed to pipe by electric welding alround the neck of pipe etc complete and as directed.
S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 10 cm length and 11 to 15 mm dia
Dismantling of timber scantling 40 Sqcm and over in section fixed in any position as framed work complete all as specified and directed
Taking out /Dismantling of existing roof treatment of any description , any position over roof including taking out plain cement concrete of any description to the thckness as directed etc complete and including lowering down complete waste materials to the ground on a place where directed and including removal of the same to a distance exc 250 mtr but n exc 500 mtr as directed .Note : The cost of lowering down and removal deemed included in unit rtae quoted by the tenderer.
M&L for cutting out cracks to V section in existing roof or terracing ,cleaning out ,wetting and sealed solidly with hot mixture of bitumen and dry sand in proportion of 1:1 by weight etc complete and as directed.
M&L for cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove sealed with cement mortar 1:3 complete and as directed.
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding laid to slope over roof and surface finished even and fair etc complete all as specified and as directed. Note : The thickness of PCC shall not be exceeded more than 75 mm at any place
M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping and on roof etc complete all as specified and as directed.
Supply only water roofing compound ( Liquid ) ISI marked etc complete and as directed
M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces of roof when concrete is still green mixed with water proofing compound ( Liquid) @ 200 ml per bag of cement of 50 kgs , surface finished even and fair enough to receive water proofing traetment etc complete all as specified and as directed. Note : WPC shall be measured and paid seperately
M&L for providing water proofing treatment over roof by applying the following operations :- (a) Preparation of plastered surface by cleaning with water and leave the sufaces till to become surface total dry . (b) Applying first coat of bitumen primer conforming to IS-3384 @ 0.4Kg / Sqm on plastered surface (c) Applying APP based polymeric membrane 3mm thick (Minimum thickness) and weight not less than 3kg/Sqm , reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) over on primed surface laid with 100mm side lap/end lap on prepared surfaces as per manufacturers instructions and under strict supervision of manufacturer's tenchnical representative etc and applying two coats of bituminous based aluminum paint @ 100 ml/sqm each coat etc complete and as directed. Note : Testing of APP membrane is mandatory and contractor will not be allowed to carry out the work untill results are obtained and found satisfactory .Cost of testing and samples ( 3Nos) deemed to be included in unit rate quoted by thetendrer and nothing extra on this account will be admissible . (ii) The cost of casting one cement plate of size 600 mm x 450 mm , 10 mm thick rendering in CM 1:3 in each building incl writing materials shall deemed to be included in the unit rate quoted by the tenderer.
M &L for Plain concrete cement tiles (Cement) 30cm X 30cm x 25mm set and jointed and pointed in neat cement slurry on roof over & including 15mm thick screed bed in CM (1: 4) and joint between the tiles to be filled with chemiucal like Grout etc Complete all as specified and directed.
Dismantling wall /ceiling boards of any description any thickness incl exiting snap grid framework of any description and as directed.
M&L for snap grid ( 600 x600 mm ) ceiling using aluminium anodised sections ie Main Tee section of 36.5x25x1.4mm size (wt not less than 0.24Kg/RM) , Wall angle of size 40x25x2mm size (wt not less than 0.36Kg/RM) , Cross Tee section 23.5x26.4x1.4mm size (wt not less than 0.191Kg/RM) and Snap grid shall be fixed to ceiling by supporting hangers consisting of 6 mm dia mild steel bar made to shape including providing mild steel flat iron cleat with 40x3 mm and fixed with expansion dash fastener n exc 1.20 mtr both ways fixed to roof etc complete all as directed.
M&L for for 4 mm thick high pressure steam cured non asbestos fiber cement designer board of size 600mm x 600mm as in ceiling complete all as specified and directed with and including aluminium anodised snap grid frame.
Dismantling asbestos cement , galvalume , fibre sheet ( Plain , corrugated , semi corrugated ) and as direcetd
S&F Pre painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in roof covering and fixed with self tapping screws and as directed .
S&F Pre painted Galvalume aluminium zinc coating GI basedplain steel sheet 0.50mm thick coloured having tensile strength of 550 Mpa as in cladding / wall fixed with self tapping screws and as directed .
M&L for 75 mm thick P.C.C 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in alternate panels made of 10 mm thick plywood ( Size of each panel shall not exceed 12 Sqm ) and finish the surface even and smooth without using extra cement including filling of joint with bitumen mastic ( 1 part bitumen mixed with 3 part dry sand) etc complete all as specified and as directed. Note : Cost of form work for forming joints and jointing materials deemed to be included in unit rate quoted by the tenderer.
M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square / rectengular) DARK ( Premium Quality ) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 etc complete all as specied and directed.
M&L glazed ceramic coloured tiles DARK ( Premium Quality ) 7 to 8 mm thick size 300x600 mm JOINT FREE over 15 mm thick rendering in cement mortar 1:4 in skirting/dado etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile etc complete all as specified and directed .
Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for Key, scrubbing down with water etc.complete all as specified.
M & L for 15 mm thick rendering in cement mortar 1: 6 on fair faces of brick work or concrete surfaces , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for 15 mm thick rendering in cement mortar 1: 6 on other than fair faces of brick work or stone masonary , surface finished even and smooth without using extra cement complete all as specified and as directed.
M & L for prepration of newly plastered surfaces of walls appying two coat of cement base paint over a coat of primer etc complete all as specified and as directed .
M & L for complete removal of existing treatment from walls and appying two coat of cement base paint over a coat of alkali resistant primer including necessary prepration of surface complete all as specified and as directed.
M & L for applying two coat of white wash on walls including necessary preparation of surfaces all as specified and directed.
M&L for Preparation of old decorated surfaces of wall including cornices, plastered or unplastered surfaces by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material etc and applying two coat of oil bound distemper complete all as specified and directed.
M&L for preparing new surfaces of steel of any description, over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paints over one coat of red oxide primer all as specified.
S&F 100 mm bore Cast iron soil waste and vent pipe SPUN PIPE in any length with or without ear and jointed in CM 1:1 fixed to wallswith MS clamp made of flat iron 50x5 mm and bolt grouted in wall with PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregates and taking out existing pipe of any description etc complete all as specified and directed.
S&F Cast iron bend any radius 100 mm bore etc compete and as directed
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 15 mm bore
Taking up or down existing steel tubing and connections including cleaning for refixing etc complete all as specified and as directed for 20 mm bore
Supplying, fixing, jointing and testing 15 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Supplying, fixing, jointing and testing 20 mm dia galvanised iron tubing medium grade ISI Marked with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed
Taking down old existing unserviceable tank PVC ( HDPE) and of capacity exc250 ltrs but n exc 500 ltrs complete as direcetd
S&F 500 ltr capacity or rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) WHITE , ISI marked , Triple layered construction hoisted and fixed in position including S&F 20mm dia GI pipe medium grade washout pipe 450mm long with plug and 20mm dia GI pipe medium grade overflow pipe 600mm long with fitting etc complete all as specified in SSR Part -I 2009 complete all as specified and as directed.
S & F ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified.
S & F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & highdensity plastic ball screwed for iron pipe 20 mm dia and fixed in new tank (minimum weight 20mm 210 gm) complete all as specified.
S&F 20 mm gun metal gate valve ( ISI Marked ) with iron wheel head screwed both ends for iron pipe etc complete as directed.
S&F in repair 20 mm gun metal gate valve ( ISI Marked ) with iron wheel head screwed both ends for iron pipe etc complete as directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n. exc 15 cm thickness below or above ground level complete all as specified and as directed.
M&L for a coat of JK/ Birla wall care putty 1mm thick including preparation of surface complete all as specified and as directed.
Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power point ) complete , including taking out fixtures and fittings such as switches , ceiling roses, pendents, regulators ,sockets,light fitting etc removing materials to store for keeping in safe custudy or for taking credit ( as per schedule of credit for dismantled/taken out items ) and making good the disturbed surfaces of walls, floors, ceilings etc and as directed .
Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.
Taking down carefully sub main wiring with any cable / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.
M & L for Surface point wiring ( IN PVC CONDUIT ) one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metelic rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed . Note : Quoted rates shall deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers .
All as per Srl item No. 67 above but one fan /Exhaust point controlled by one switch & regulator.
All as per Srl item No.67 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
All as per Srl item No.67 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No 67 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.
M & L for CONCEALED point wiring one light point controlled by one switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 Sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including non metelic rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed .NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the conduit to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. The portion of point wiring at ceiling shall be in surface PVC conduit/ casing & caping of suitable size as directed fixed on ceiling surface with using PVC rawl plugs. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with 3mm thick ISI marked hylam sheet/ backlite sheet cover fixed with suitable brass screws and cup washers
All as per Srl item No. 72 above but one fan point controlled by one switch & regulator.
All as per Srl item No.72 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.
All as per Srl item No.72 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.
Description all as per item No 72 above but for power point wiring using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 Sqmm stranded copper conductor Green as continuous earth wire with lugs complete all as specified and as directed.
S & F switch piano flush button type 10 Amp, single pole ,one way , AC ,230 Volts , 50 Hz complete all as specified and as directed.
S&F socket outlet 2in 1 , 3 pin , 10 Amp , AC , 230 Volts , 50 Hz complete all as specified and as directed.
S & F switch piano flush button type 20 Amp, single pole, one way ,AC ,230 Volts ,50 Hz complete all as specified and as directed.
S & F socket outlet 2 in 1, 10 Amp and 20 Amp, AC , 230 Volts ,50 Hz complete all as specified and as directed.
S & F delux fan Regulator rotary, step type , AC ,240 Volts ,50 Hz complete all as specified as directed.
S & F Lamp holder,PVC/Urea type with back plate ,AC ,230 Volts ,50 Hz , ISI marked suitable for batten fittings complete all as specified as directed
S&F ceiling rose,surface bakelite 65 x50mm three brass terminals, AC ,230 Volts ,50 Hz ISI marked complete all as specified and as directed.
S & F 9/10W LED retrofit Ball lamp holder base B-22, bipin type AC 230 Volts 50 Hz with PF not less than 0.95 with polycorbonate body and aluminium heat sink complete all as specified as directed.
S&F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 10 sq mm (Nominal area) multi stranded drawn into new non rigid metellic PVC conduit with and including 6 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: Two run of single core PVC cable with one run of earth conductor cable and conduit shall be measured as one unit. (ii)Cost of new PVC conduit including conduit accossories shall be deemed to be included in unit rate quoted by the tenderer .
S&F for sub main wiring with PVC insulated, unsheathed flame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 6 sq mm (Nominal area) multi stranded drawn into new non rigid metellic PVC conduit with and including 4 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: Two run of single core PVC cable with one run of earth conductor cable and conduit shall be measured as one unit. (ii)Cost of new PVC conduit including conduit accossories shall be deemed to be included in unit rate quoted by the tenderer .
S&F TPN DB- DPX 125 MCCB DBs 4 way double door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125 + 12 etc complete all as specified and directed.
S&F MCCB , 200 Amps, 415 Volts, 4 P , 50HZ, having 36 KA rupturing capacity with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed .
S&F MCCB , 100 Amps, 415 Volts, 4 P , 50HZ, having 25 KA rupturing capacity with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed .
S&F MCCB , 63 Amps,415volts,3 phase,50HZ, having 35 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed .
S&F MCCB , 63 Amps,415volts,3 phase,50HZ, having 16 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed .
S&F sheet metal enclosure box with hinges door suitable for MCCB 63 Amp to 100 Amp with all necessary fixing arrangementetc for wall etc. complete all as specified and as directed .
S&F sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100Amp rated bus bar 8 ways 240 V complete all as specified and as directed.
S&F MCB single pole and neutral 40 Amp 240 V ,10KA , 'C' series, ISI marked complete all as specified and as directed with copper lugs.
S&F MCB single pole and neutral 63 Amp 240 V ,10KA , ' C' series, ISI marked complete all as specified and as directed with copper lugs.
S&F MCB TPN 63 Amp 240 V ,10KA , 'C series, ISI marked complete all as specified and as directed with copper lugs.
S&F MCB single pole 6 to 32Amps 240 V,10KA, 'C' series, ISI marked complete all as specified and as directed with copper lugs.
S&F in repairs 20 W LED ,6000k decorative ultra slim linear fitting , extruded aluminium , environmental friendly, energy efficient incl 20 W lamp fitted incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed.
S&F 36W 2X2 LED fitting Ultra mordern ceiling mounted luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose.
S&F wall mounted fan 600 mm sweep TURBO FORCE aerodynamic desined blade for high air deleivery, copper wound complete incl all necessary fixing arrangements and as directed.
S&F ceiling fan 1200mm sweep copper wound BEE rated AC single phase 230 volts etc connecting with flexible cable 3 core copper conductor of size 23.0/0076 of suitable length from celling rose complete all necessary arrangement of hanging of celling fan (GI Pipe hook etc) as specified and as directed.
S & F Exhaust fan, AC , singe phase , 230/240 Volts , 300 mm sweep , copper wound, noiseless light-weight rust proof steel body self closing louvers and blades, speed 1400 complete with all arrangement of making hole complete all as specified and as directed.
S&F for replacement & testing commissioning of outdoor type bus bar panel padestel type weather proof MS cubical panel board made of 3 mm CRCA MS sheet , size 110 cm x 80 cm x 40 cm, 4 Nos of aluminium bus bar of 500 Amp capacity including providing MCCB ,4 pole , 320 Amp , repturing capacity 35 KA , adjustable type (Ics =Icu=100%) including one coat of redoxide and two coat of enamel paint powder coated, mounted on mild steel channel of suitable size and providing PCC work in PCC 1:3:6 type C-2, 60 CM height above GL over 300 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) in foundation for fixing panels & aluminium busbar chanel insulated with colour coated heat shrinkable sleaves and mounted on DMC/Epoxy insulator all as specified & directed.
S&F new generation energy saving and environmental friendly long life LED flood light made up of innovative die cast aluminium housing high power LED as lighting source with IP - 66 power consumption 30 watt complete input voltage of 150-240 Volt (nominal rated voltage 240 Volt) complete all as specified and directed.
S&F in replacement new generation security light fitting 1 X 36 W LED , envoirnmental friendly long life , made up of of innovative die cast aluminium housing with high power LED as light source with IP 66 protection , power consumption 45 watt complete input voltage of 150 -240 Volt ( nominal rated voltage 240 volt) including electric connection with 1.5 sqmm 3 core PVC insulated and PVC sheathed cable stranded Copper conductor from junction box to security light etc complete as specified and as directed.
Supplying , laying & testing in replacement cable XLPE insulated screened PVC bedded armoured with galvanised steel wire or tape , electric power cable heavy duty 1100 volt grade aluminium conductor of size 50x3.5 Core including taking out ACSR/UG cable from any location etc complete all as directed. etc complete all as directed.
Supplying , laying & testing in replacement cable XLPE insulated screened PVC bedded armoured with galvanised steel wire or tape , electric power cable heavy duty 1100 volt grade aluminium conductor of size 25x3.5 Core including taking out ACSR/UG cable from any location etc complete all as directed. etc complete all as directed.
Supplying , laying & testing in replacement cable XLPE insulated screened PVC bedded armoured with galvanised steel wire or tape , electric power cable heavy duty 1100 volt grade aluminium conductor of size 25x 4 Core including taking out ACSR/UG cable from any location etc complete all as directed. etc complete all as directed.
Supplying , laying & testing in replacement cable XLPE insulated screened PVC bedded armoured with galvanised steel wire or tape , electric power cable heavy duty 1100 volt grade aluminium conductor of size 16 x 4 Core including taking out ACSR/UG cable from any location etc complete all as directed. etc complete all as directed.
M&L for dry clean sand free from sharp materials for cushioning laid in trenches in layers for under ground electric cable complete all as specified and directed
Supplying and laying precast concrete cable cover class LV type -I flat size 250x150x40 mm laid parpendicular to the axis of cable in trenches etc complete as directed.
Supplying and laying GI pipe 50 mm bore medium grade including providing fittings such as elbow, Tee, socket etc laid on floors/trenches/walls with complete fixing arrangements and testing etc complete all as specified and directed .
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight n less than 17.25 kgs buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT I ( 2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick weight n less than 17.25 kgs buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead strip of size 32x6 mm thick by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT I ( 2009) with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.
M/S M S Constructions
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .