SPECIAL REPAIR TO BLDG NO T 10 AT MALL ROAD, MT SHED AND ONE TOILET BLOCK, DRAIN AND PATH AT CERTAIN AREA AND PROVN OF WATING AREA AND SHED AT CERTAIN PLACES UNDER GE EAST AGRA

Amount

Demolition of cement concrete in ground floor and paving n exc 15cm thickness (below or above the ground level) built in cement mortar complete all as specified and directed.

M&L 50mm thick cement concrete 1:2:4 type B2, (using 40 mm graded stone aggregate) complete all as specified and directed.

M&L 15 mm thick wearproof topping as specified (incorporating an approved metallic floor hardner) laid on concrete floors and pavings and finished even and smooth complete all as specified and directed.

Supply only glass dividing strips 3 mm thick of width 20/22 mm complete all as specified and directed.

Removing building material /demolished materials etc to a distance of 100 m or under , beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed.

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connection complete all as specified and directed.

Taking up or down 20 mm bore steel tubing and connection complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on brick or concrete surface with water proofing compound @ 2% by weight of cement finished fair complete all as specified and directed. Note : Water proofing compound will be measured and paid seperately under respective item of Sch ‘A’.

M&L for 15 mm thick rendering in CM 1:6 on other than fair faces of brick or concrete surface with finished fair and even complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:6 on any faces of brick or concrete surfaces of walls & finishing the surface even and fair complete all as specified and directed.

M&L for coloured glazed ceramic tiles (Digital & designer Pattern) in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match tiles including 10mm thick rendering in CM 1:3 on brick wall complete all as specified and as directed .

M&L glazed ceramic non skid joint free coloured tiles (1st quality/premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06Sqm but not exc. 0.11 Sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed or bedding layer of cment mortar (1:6) complete all as specified and directed.

S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including brackets, rubber bush, washers etc complete all as specified and directed.

S&F in repair 15 mm bore CP Stop valves, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.

S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore, brass chromium plated pillar cock (foam flow) screwed down for pipe and fixed complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

S&F 20mm bore steel water tubing medium grade galvanized including fittings and fixed to walls, ceilings, floors or laid in floors complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for preparation of new plastered surfaces of wall and applying Three coat of white wash complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan pedestal pattern white (excluding fixng bolt flushing cistern and flush pipe) complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hingeing device complete all as specified and directed.

Taking down Chowkhats or frames exc. 1.5 sq. m but n. exe 4 sqm (without taking off shutters from the frames each complete all as specified and directed.

S& F Factory made Solid PVC Moulded Door Shutter with Particle Boarde core, 28 to 30 mm thick (stiles), with 2,4 or 6 raised panel design with 2 mm thick Moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing. complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

S& F 150 mm Aluminium handles, cast type,anodised fixed complete all as specified and directed.

S&F 200mm long Aluminium anodised,barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 300 long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth for foundation etc or depth for foundation etc or for shafts, wells, cesspits, pier holes etc n. exc 10 sqm on plan and n. exc 1.5 m in depth and getting out in soft and loose soil complete all as specified and directed.

M&L,cement concrete 1:4:8 type D2 (40 mm graded stone aggregate ) in foundation filling and mase concrete complete all as specifeid and directed.

M&L for re-inforced cement concrete M-25 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete etc complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Columns, pillars, piers, posts and struts etc complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for re-inforced cement concrete M-25 (20 mm gtrded aggregate) in Beams, cantilevers,bressummers, lintels over 1.5m span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions all as specified complete all as specified and directed.

M&L formwork to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar work n exc 200mm thick (Horizantal or sloping ) for flat foir finished surfaces complete all as specified and directed.

M & L formwork to edges of concrete roofs exc 10cm n exc 20cm wide for fair finished surface complete all as specified and directed.

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

-Ditto- all as per item No 43 above but 6 to 8 mm dia

Ditto all as per item No 43 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for PCC 1:2:4 Type B1 ( using 20 mm graded stone aggregate), in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in eight, copings, kneelers, apex stones bed plates, kerbs chajjas , water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layers n. exc 25 cm complete all as specified and directed.

Removing surplus soil to a distance n. exc 50 m and depositing where directed at a level n. exc 1.5 m above starting point complete all as specified and directed.

M&L for applying two coats of Cement base paint over one coat of primer incl preparation of new or previously untreated wall surfaces complete all as specified & directed.

M&L for 10 mm thick cement plaster (on roof projection, chajja's, ceiling etc.) in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying two coats of Cement base paint over one coat of primer incl preparation of new or previously untreated ceiling surfaces complete all as specified & directed.

M&L for 10 mm thick cement plaster (on roof ) in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed

M & L for three coats of white wash on new plastered surfaces of ceiling including preparation of surfaces complete all as specified and directed.

M&L Hardcore of broken stone boulders gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 75 mm thick cement concrete type C-1,1:3:6 (20mm graded stone aggregate) as in plinth protection ,finishing cement concrete surface even and smooth without using extra cement and spike rollong to surfaces or making impression of expanded metal,whilst the concrete is green complete all as specified and directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base etc finishing surface even and rough using broom finish complete all as specified and as directed.

M&L for 40mm thick cement concrete 1:2:4 type B-1, (using 20mm graded stone aggregate) as in sub base etc finishing surface even and rough using broomfinish complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semicorrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed.

S&F of Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L Preparing newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting complete all as specified and directed.

M&L Preparing old plastered or unplastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying one coats of oil bound distamper complete all as specified and directed.

Dismentling wall and ceiling board or insulation board /slabs/blanket any thickness including cover fillets.

S&F 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x27mm and main T 23mm x 35 mm of 30 gauge suitable for false ceiling including GI wire 3 mm thick @ 1200 mm centre to ceter both ways for hanging arragement coplete all as specified and directed

Fixing only 605x605mm snap grid of powder coated galvanized iron of angle of size 23mm x 23mm of 30 gauge (Perimeter), T section of size 23mm x27mm and main T 23mm x 35 mm of 30 gauge suitable for false ceiling including GI wire 3 mm thick @ 1200 mm centre to ceter both ways for hanging arragement complete all as specified and directed

M&L for 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed.

Fixing only 4 mm thick non asbestos fibre cement building designer boards fixed in ceiling or laid/inserted to timber/GI/aluminun frame complete all as specified and directed.

Taking down Aluminium door chowkats or frame with shutter (without taking off shutters from the frame) area exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed.

S& F partly glazed (5.5 mm thick tinted sheet glass) and partly prelaminated board panel (min 12 mm thick) aluminum door consisting of frame of 63mm x 38 mm size with shutter fixed on frame both side open able on pivotal arrangement with floor spring including necessary cutting holes in wall & floor. Door shutter consists of top rail size is 83 x 44 mm , bottom rail & lock rail size is 110 x 44 mm & style of door shutter is 83mmx 44 mm with automatic door closer equipments fitted on frame as required fixed with rubber gasket & aluminum beading any No of panels with aluminum handle , locking arrangement etc complete ( wall thickness of member is not less than 1.50 mm ) confirming to IS complete all as specified and directed. Make - Jindal Aluminum / Man Industries or equivalent as approved by GE/ Engg-in Charge

Hacking out old broken glass exc 0.5 Sqm (any thickness, size, quality or description) complete all as specified and directed.

M&L 4mm thick ordinary quality sheet glass and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed.

S & F in repair double action floor spring hydraulically regulated made up minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part made of mild steel heavy duty complete all as specified and directed.

Dismantling of wrought iron of mild steel work of any description not otherwise poivided complete all as specified and directed.

S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 -W (GdeE- 250) qualityA complete all as specified and directed.

M&L Preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L Preparation of old steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint complete all as specified and directed

M&L for Coloured Glazed ceramic tiles 300 x 200 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for preparation of old plastered surfaces of wall and applying one coat of white wash complete all as specified and directed.

Supply only Integral water proofing compound

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) for surface channels, bed of drains incl forms/moulds etc complete all as specified and directed.

M&L for Plain Cement Concrete 1:3:6 mix type C1 (using 20 mm graded stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates, hold fast and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in precast kerb stones of sizes as directed, including embedding in the ground to depth as indicated and tamping ground around kerb stones and also for removing surplus spoil etc.

M&L 100mm thick Cement concrete1:4:8 type D-2 (using 40mm graded stone aggregate) for subbase of flooring complete all as specified and directed.

M&L for 60 mm thick rubberised interlocking paver blocks confirming to IS 15658-2006 of cement concrete M-35 designation (compressive strength) of mixed colour, factory made, laid over sand cushion including compaction etc complete all as specified. Note :- Sand cushion will be measured and paid seperately

Supply only Fine aggregate (sand) for laying floor finishes

M&L Stone kerb of roughly squared granite trap stones of size 15 cm x 30cm,dressed so that the maximum depression from a straight edge or curved held against the except dressed stone surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in cement mortar 1:6 and struck flush complete confirming to IS -15006 complete all as specified and directed

Surface excavation in soft/loose soil not exc 30 cm deep and average 15cm deep and getting out complete all as specified and directed.

Excavation in post holes soft/loose soil (or similar holes) each n, exc 0.5 cum and getting out soft/loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, watering and romoving surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F steel work in roled sections or tubular sections, in main and cross beams, posts, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates complete all as specified and directed.

SHRI RADHAYSHYAM JHA

deva engineers

SHRI SAINATH ENGINEERS

Asha Construction

MNR ASSOCIATES

M/s S. K. Construction Co.

SahaDevSingh Constructions

C P Singh and Co

M/s Salim Mohomad

Apoorva Constrution