Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹36.3 L+₹3.8 L (11.8%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹38.1 L+₹5.6 L (17.3%)Rejected-AOC | L3 | Rejected-AOC Rejected |
Tender Value
₹40.0 L
EMD Value
₹80,000
Closing Date
2 May 2023, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER GOMANATAK
GARRISON ENGINEER GOMANATAK PIN 403802
Repair and Maintenance of Day to Day Complaints of Officer Married Accommodation at NOFRA II under AGE BR II in GE Gomantak Vasco
2023_MES_588473_1
8514/E8
Open Tender
Support/Maintenance Service
Item Rate
270 days
VASCO DA GAMA
As per tender documents
8 documents required · 8 mandatory
₹500
GE GOMANTAK
₹80,000
Yes
20 May 2023
6 Apr 2023
3 May 2023
6 Apr 2023
2 May 2023
20 Apr 2023
Amount
Demolition of Brick Work built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any descriptions, keep Serviceable Bricks in Safe Custody for re-use, complete all as specified and as directed.
M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6.
Taking down Cement Plaster, any description on Brick Walls or on Concrete Surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (4th floor and scafolding)
M&L Rendering 10mm thick in Cement Mortar 1:6 on Fair Faces of Brick Work or Concrete Surfaces, Plastered Surfaces finishing Fair and Even including on walls , complete all as specified and as directed.
M & L 5 mm thick rendering in cement mortar 1:3 on brick work or concrete surface on ceiling finished even and smooth without using extra cement complete all as specified and directed
M&L Rendering 15mm thick in Cement Mortar 1:4 on Fair Faces of Brick Work or Concrete Surfaces, Plastered Surfaces finishing Fair and Even complete on walls surface with using of water proofing compound or chemical , complete on walls surface all as specified and as directed.
M&L for applying two coat of oil bond distemper over 3mm thick putty on ceilling surfaces and preparation the surfaces complete all as specified and directed
Supply only liquid waterproofing compound.
M&L for preparing new decorated surfaces plastered on walls one coat of alkali resistant primer on new plastered surfaces over 3mm thick Birla white wall care putty and applying two coat of oil bond distemper with all cleaning and wash of paint spot on floor,furniture and wall area etc, including necessary scaffolding complete all as specified and directed
M&L for applying two coats of Anti fungal paint over a coat of primer to match the existing colour including preparation of newly plastered surfac and necessary scaffolding.
M&L for preparing old decorated surfaces plastered on walls including cornices plasters by brooming down or steel wire brusing, scraping down, smoke spots and applying two coat of oil emulsion weather proof or water proof paint over a coat of primer complete with all cleaning and wash of paint spot on floor,furniture and wall area etc. including necessary scaffolding.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles from site complete all as specified and directed by Engineer in charge.
M&L Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick rendering in cement mortar 1:3 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed.
M&L Coloured non skid ceramic tiles 8 to 10 mm thick (Square/rectangular) area of each tile exceeding 0. 11 sqm but not exceeding 0.18 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or Coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. completed all as specified and as directed.
M&L for Vitrified Ceramic tiles 8-10 mm thick Colour (square/rectangular) polished, area of each tiles exc .18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, including Screed Bed 15 mm thick in Cement Mortar (1:6) complete all as specified and as directed.
Demolition of stone slab and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed
S&F Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rounding,rubbing and polishing complete
M&L 20 mm thick Granite stone slab of approved colour ( of any type) work ( table rubbed and polished to mirror finish ) in steps , jambs, pillars, window cills, cooking plateforms,WHB plaforms and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite CM 1:4 complete all as specified.
M&L Machine cut kota slab flooring 20-25 mm thick and including (in one piece) at flooring, steps of staircase etc.over 15 mm thick screed bed of CM (1:4) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete.
M&L for rounding to edges of granite stone slabs one edge, such as in steps, cooking platform, and other similar situations (inner side only)
Demolition of PCC in ground floors & pavings n exc 15 cm thickness (below or above ground level)
M&L for 25mm thick PCC 1:2:4, type B-1, using 20mm graded stone aggregate, in base to floor tiles complete all as specified and directed by Engineer-in-Charge.
M&L 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and fair without using extra cement complete.
M&L for fixed in repairs Chequered Cement Concrete Tiles 300X300X 25mm thick pre printed colour or glosy finished tiles , Set and Jointed in Neat Cement Slurry with Grey Cement and Pigment over and including Screed Bed 15mm thick in Cement Mortar (1:6) as in Path, complete all as specified and as directed.
M&L for Removing of Small Trees along with Grass Roots from surroundings of water storage tanks by manually with the help of sharp tools and filled up small holes with PCC (1:2:4) Type B0 (12.50mm Graded Stone Aggregate) finished surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces and removing from site complete all as specified.
Taking down wooden Chowkhats or frames exc. 1.5 sq.m and n.exc 4.0 sqm each with shutters ( without taking off shutters from the frames) and including making good the wall surfaces complete all as specified.
Taking down wooden shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.
M&L forming jambs etc to opening including cutting toothing and properly bonding into old work including facing and plastring to match existing work in cement mortar 1:6 etc. complete.
S & F Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 fixed with fasteners.
S&F aluminium powder coated frame and shutters for partition / windows/ ventilators/doors sliding/fixed/openable type complete with necessary fittings such as two aluminium handle cum lock for each window, roller etc and fixing all as speciefied and directed by Engineer-in-Charge.
S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified and directed .
S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – I 2009 and as directed by GE/Engineer-in-Charge.
S & F 2nd class hard wood plain solid straight chowkats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified.
S&F 2nd class H/W 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
Supplied and fitted 2nd class H/W 35 mm Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats
S&F 35 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides, complete all as per specified and as directed by Engineer-in-charge.
S&F aluminium anodized, barrel tower bolt of extruded section, 150 mm (ISI marked).
S & F butt hinges medium weight cold rolled mild steel 100 mm long (isi marked)
S & F 150 mm long Aluminium handles, cast type (ISI marked).
S&F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete.
S&F for hold fast made out of 25x3 mm MS flat iron.
M&L PCC 1:2:4 type B-0 using 12.50mm graded stone aggregate as in coping, bed plate etc complete.
M&L two coats of synthetic enemel paint on new wooden surface over a coat of pink primer incl necessery preparation.
M&L ( in repairs) 18 mm thick Prelaminated particle board, interior grade, type-II, prelaminated one side with decorative choice lamination and other side balancing white lamination , fixed with screws as in shutters of Cup Boards complete with Wooden beads of size 18mmx6mm around edges and its varnishing / french polishing as directed and specified.
S&F continuous ( piano) hinges, mild steel , bright finish or electrigalvanised width of flaps (when opened) 30 mm complete all as specified.
S&F 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws in repairs complete all as specified.
S & F 100 mm long Aluminium handles, cast type (ISI marked).
Hacking out old broken glass (any thick size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and directed by Engr-in-Charge.
S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-Charge.
S&F plain glass 4 mm thickness, ordinary quality and glazing with oil putty /rubber beading all as specified and directed.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including all fixing arrangement of wiremesh.
S&F aluminium anodised wire mesh of size 1.5 mm x 3 mm mesh 20 Gauge thick in doors / aluminium window shutters rate including removal of aluminium grills aluminium window shutters and refixing them in position after fixing of wiremesh.
S&F in repair aluminium alloy anodized sliding door blot with hasp staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy length of bolt 250 mm complete all as specified and directed by Engr-in-Charge.
S&F in repairs butt hinges cold rolled mild steel 100 mm long medium weight fixed to angle iron chowkhat including making etc complete all as specified and directed by Engr-in-Charge.
S&F in repair Alluminium barrel tower bolts stove enamelled with bright bolt length of bolt 200 mm all as specified and directed by Engr-in-Charge.
All as per item No 56 here in above but length of bolt 150 mm complete all as specified and directed by Engr-in-Charge.
S&F in repair extruded aluminium alloy handles fabricated type 150 mm size complete all as specified and directed by Engr-in-Charge.
S&F in repair 150mm dia double legged door stopper of aluminium alloy with rubber complete all as specified and directed by Engr-in-Charge.
S&F in repair 75 mm size Hasp and staple , safety type, Aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified.
S&F in repair extruded aluminium alloy handles fabricated type 100 mm size complete all as specified and directed by Engr-in-Charge.
S & F 300mm mild steel, in repair ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete.
S & F in repairs ISI marked hydraulically regulated door closer die cast body type complete suitable for door shutter width upto 1.80 mtr and weight between 61 to 80 kg all as specified.
M&L in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other partsmade of mild steel heavy duty and fixed complete all as specifiedand directed by Engr-in-charge
M&L in fixed in repairs for Steel Plate Rack size 1.2m x 0.90 m complete as specified and directed
M&L in fixed in repairs for Steel Plate Rack size 0.60m X 0.90 m complete as specified and directed
S & F Curtain rails, 25 mm dia fancy drapery curtain rod made of aluminium powder coated duly PVC sleeved with pair of fency brackets and finial fixed in repair complete all as specified.
Dismantling wall and ceiling boards (fibre, pulp, insulation,etc) or insulation board/Slabs/blankets of any thickness including cover fillets, complete all as specified and as directed by Engineer-in-charge.
M&L 12 mm plywood grade BWR, type BB, fixed with screws to timber frame work and fixed in repairs
M&L for 4mm Non thick Asbestos fiber Cement building board / E-board for ceilling incl powder coated GI frame (snapgrid) of standard section as per manufacturers instructions with the 2mm thick GI suspender in ceiling complete all as spd.
S&F pvc door bottom weather strip door brush sweep seal fixed complete all as specified and directed.
Attending complaints relelated to carpentary works, this includes repair/easing of door, window, refixing or rectfing of door, windows, pelmet, curtain rod, tighting of loose wire gauge, refixing of tower bolt, handles, hinges, sliding door bolt etc with nails, screw to make door/windows functional to attend the complaint by deploying one carpenter with 01 helper for day to day maintenance timing from 0830 hrs to 1730 hrs, (Sunday or holiday if any urgent). Contractr will provide the Carpenter T&P and Necessary Nail, Screws, Ladder for reaching 4th floor , Welding eqpt and machine Set etc) The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis.(iii) In case If Contractor fail to attend the complaint on same day a recovery of Rs 350 per day per complaint shall be made from his dues.
S&F WC seat cover for fixed in repair in different size and shape sutaible for EWC floor and wall mounted seat ,colour match with existing EWC seat complete all as specified and directed.
S&F in repair chromium plated tubular towel ring 20mm dia complete all as specified and directed by Engr-in-Charge
S&F PVC connections 15mm size with PTMT nuts of length 600 mm or 900mm complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC waste pipe flexible type 25mm dia suitable for couplings 32mm & 40mm dia 600mm long complete all as specified and directed by Engr-in-Charge. MAKE: SYMET PRAYAG.
S&F PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including a Pair of Cast Iron Brackets duly Painted/Erecting Stand and PVC connection pipe 15mm size, PVC Flush Pipe of polythene 32mm dia for Low Level Flushing Cistern including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down/out Unserviceable Flushing Cistern and connected Items complete all as specified and directed by Engr-in-Charge.
M& L for Vitreous China Squatting Pan ‘ORISSA’ Pattern, size 580X440 mm White, with ‘P’ or ‘S’ Trap, Integral Foot Rest, providing Joints between Flush Pipe and Socket of WC Pan (excluding Flushing Cistern and Flush Pipe), fixing in repair and including provision of 150mm thick Lime Concrete Bedding including Taking out unservice able WC Pan and connected Items, complete all as specified and as directed.
M&L Vitreous China Wash down Water Closet Pan (Pedestal Pattern) White including fixing Bolts (excluding Flushing Cistern and Flushing Pipe) with Plastic Water Closet Seat, Black, Closed Pattern with Recessed Bottom and Cover or wall mounted seat including Mild Steel Chromium Plated Aluminium Hanging Device and fixed-in-repairs,and Making Good disturbed Surfaces with Cement Mortar 1:3 and removing old Wc seat , complete all as specified and as directed.
S&F in reapir Vitreous China Wash Hand Basin 630X450mm in size, White (Flat Back Type) with 32mm dia Brass Chromium Plated Waste Fitting, Galvanised Iron ‘Light Grade’ 32mm bore Waste Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 and fixed including Taking down Unserviceable Wash Hand Basin and connected Items, complete all as specified and directed by Engr-in-Charge
Taking up or down 25 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed
Taking up or down 20 mm dia steel tubing and connection including cleaning for re-fixing or removal from site complete all as specified and directed
Supplying and laying of CPVC pipes 20mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed
Supplying and laying of CPVC pipes 25mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors,including all fitttings complete all as specified. complete all as specified and directed
S&F grating doom type 100mm dia of stainless steel (min wt 25gms)
Dismantling of PVC existing water tank of exc 500 ltrs & n. exc 1000 ltr capacity and removing.
Dismantling PVC water tanks Exc 250 ltrs but not 500 ltrs for the following size and removing to site
S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 500 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including removing existing water tank fixed with tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.
S&F Rotational moulded Polyethylene (HDPE) Water Storage Tank 1000 LITRE Capacity (Cylindrical Vertical with Closed Top), Black in Colour, Three Layered Construction, hoisted and fixed in Position all specified in MES Schedule Part-I, including removing existing water tank fixed with tank nipple, union and Lowering of unserviceable Water Storage Tank with Float Valve of any description complete all as specified and directed by Engineer in charge.
S&F in repair 15mm bore pillar taps cast copper alloy fancy type chromium plated screwed down long size and high pressure with or without lattered HOT or COLD with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed by Engr-in-Charge. MAKE: ZIM/PARKO/SOMA.
S&F Angle Stop Cock 15mm Bore (dia), Chromium Plated, screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
S&F Bib Taps 15mm Bore, Cast Copper Alloy, with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs complete all as specified and directed by Engineer in charge.
Cleaning and removing all scale and dirt, etc,with bleaching power, brush from mouths of circulating pipes etc capacity exc 250 and not exc 1000Ltr each( 2 times in six months) including write date of cleaning and next due date also
PVC Tank covers of 300 ltrs, 500 ltr and 1000 with PVC nuts & bolts and rounded autolock SI Mark.
S&F in repairs ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 20 mm bore complete all as specified and directed by Engineer in charge.
All as per item 96 here in above but 25 mm bore complete all as specified and directed by Engr-in-Charge.
S&F Brass Chromium Plated Soap Dish, Single, as Approved, fixing with Brass Chromium Plated Screws including Taking down unserviceable Soap Dish of any description complete all as specified and directed by Engineer in charge.
S&F Chromium Plated Health Fosset, as Approved, including Taking down unserviceable Health Fosset of any description complete all as specified and directed by Engineer in charge.
S&F Chromium Plated Shower rose 15 mm, as Approved, fixed including Taking down unservice-able Shower rose of any description complete all as specified and directed by Engineer in charge.
S&F 100mm CP Grating doom 100 mm dia of (Minimum weight) and fixed in repairs complete all as specified and directed by Engineer in charge.
S&F Angle Cock 15mm Bore (dia), Standard of PTMT, any Colour high pressure screwed for Iron Pipe and fixed-in-repairs, complete all as specified and as directed.
S&F Bib Tap 15mm dia, Standard of PTMT, any Colour, screwed for Iron Pipe and fixed-in- complete all as specified and directed by Engineer in charge.
S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE
S&F in repair CP basin mixture, for mixing hot and cold water fancy type cast copper alloy , with capstan heads, chromium plated , screwed down for 15 mm bore pipe,high pressure with long screwed shanks and fly-nuts , screwed for iron pipe ISI Marked of other specified. approved by GE
S&F Chromium Plated Toilet paper holder with Paper roll as Approved, fixed including Taking down unserviceable Toilet paper holder of any description complete all as specified and directed by Engineer in charge.
S&F 2 in one Bib Taps 15mm Bore, Cast Copper Alloy,with crutch or butterfly screwed down, screwed for Iron Pipe or for Brass Ferrule and fixed-in-repairs, complete all as specified and as directed.
S&F Chromium Plated 900mm long Towel Rail as Approved, fixed including Taking down unserviceable Towel Rail of any description complete all as specified and directed by Engineer in charge.
S&F Stainless Steel Kitchen Sink with Drainage Board of Overall Size 915X460mm and Bowl Size 410X330X160mm, made of Stainless Steel 1.0mm thick Sheet with Plugs, Chromium Plated Waste Coupling and Washer including Bedding in Cement Mortar 1:4 to Dwarf Wall or fixing Cantilever Brackets and Connection to Pipe including Taking down unserviceable Sink and Connected Items complete all as specified and as directed by Engr-in-Charge.
S&F in repair,High pressure connection pipes 36" longwith chrome plated nuts,Cat no-AE-06,Make-nixo/Shakti
S&F in repair,CP Glass shelf (22x6"),Cat part no- ES01A,,make-Nixo/Hilife/Cera/Prayag
S&F in repair, CP corner shelf(12"x12") Cat no-ES03A,Make-Nixo/Hilife/Cera/Prayag
Material &Labour for Cutting chases, pinning in. making good to facings where equired and pointing in cement mortar 1:3 to ends or edges and cutting chases for concealed water tubing, and making good, cutting not exc 10 cm girth.
S & F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf / Sqcm for WHB and sink complete all as specified and directed.
Adjustment of the float valve or ball valve or lever or handle to without replacement of any part of the high level cistern & OHT of any size. Petty repair for leaking water in bib tap,piller tap,stop cock,angle valve,WHB mixure,concealed etc of any description any size by cleaning washer/jumper wall etc ,removal of air lock/blockage of water in GI tubing 15/20mm bore incl taking down (if required) cleaning the pipe or fitting etc. and refixing the same in position attending all complain connected with plumbing work and water supply work complete all as specified and directed. Note : (I) The rates quoted in the above item includes cost of T&P like screw driver etc complete.(II) Minimum 02 plumber shall be deployed by contractor and they shall be present on all working days (Sunday or holidays if any urgent) from 08.30 hrs to 1700 hrs for maintenance of above mentioned work The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis.(iii) In case If Contractor fail to attend the complaint on same day a recovery of Rs 350 per day per complaint shall be made from his dues.
Supply for 20 mm CPVC Union in fixed in repairs
Supply for 25 mm CPVC Union in fixed in repairs
Supply for MS nails 24 to 36 mm long nails for coarpaiter works.
Supply for CPVC Pipe 20 mm dia in fixed in repairs
Supply for CPVC Pipe 25 mm dia in fixed in repairs
Supply for CPVC Elbow 20 mm in fixed in repairs
Supply for CPVC Elbow 25 mm in fixed in repairs
Supply for CPVC Tee 20 mm in fixed in repairs
Supply for CPVC Tee 25 mm in fixed in repairs
Supply for CPVC Nipple 25 mm x 100 in fixed in repairs
Supply for CPVC Nipple 20 x 100 mm in fixed in repairs
Supply for CPVC Socket 20 mm in fixed in repairs
Supply for CPVC Socket 25 mm in fixed in repairs
Supply for CPVC Extension Nipple 20 x 100 mm in fixed in repairs
Supply for CPVC Nipple 25 mm x 50 in fixed in repairs
Supply for CPVC Nipple 20 x 50 mm in fixed in repairs
Dismantling of cast iron drain pipe 100mm/75mm dia jointed in cement mortar and taking out of trenches/wall/floor etc incl fitting in foul condition.
Supply and fixing in repairs PVC (SWR) pipes 110 mm single socketed in any length with rubber ring joints fixed to walls in foul condition
Supply and fixing in repairs PVC (SWR) pipes 75 mm single socketed in any length with rubber ring joints fixed to walls in foul condition incl dismantling of old pipe.
Supply and Fix in repair PVC (SWR) bends any radius 110mm
S&F in repair PVC (SWR) bends any radius 75mm dia
M&L in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement
Dismantling wrought iron or mild steel work of any description not otherwise provided
Dismantling Plain or Corrugated Steel Sheeting of any gauge or similar pattern Roof Coverings complete all as specified and directed by Engineer in charge.
M&L for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed in repair with self tapping J hooks including dismantling of existing sheet in any position complete all as specified and directed by Engr-in-Charge.
S&F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates. Fe-410-W(Gde-E-250) quality-B).
S & F Steel rolling shutters with 1.00mm thick laths, without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified & directed
M&L for two coat of synthetic enamel paint on steel surfaces including preparation newly steel surfaces over a coat of red oxide zinc chrome primer, over 10 cm in width or girth, not other wise described.
Attending complaints relelated to Mason works, this includes repair of plastering, floor, hardstanding, brick work, roof repair, chajjas,PCC etc by deploying one Mason with 01 helper for day to day maintenance timing from 0830 hrs to 1730 hrs (Sunday or holiday if any urgent) Contractr will provide the Mason T&P and Necessary Nail, Screws, Lad ,cardies,favda,tasla ,ladder for reaching 4th floor and etc) for maintenance of above mentioned work. i) The persons will be detailed by JE/AGE concerned every morning for attending complaints on daily basis.(iii) In case If Contractor fail to attend the complaint on same day a recovery of Rs 350 per day per complaint shall be made from his dues.
Supply only for cement 50 kg in each bag
Supply only for Aggregate 20 mm
Supply only for Aggregate 12.5 mm
Supply only for Course sand
Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 3.0 cum each load for upto 10.00 km including loading, unloading and stacking at the destination and depositing out side defence land all as directed by Engr-in Charge.
Treating as ATT in Post construction the soil under plinth protection,floor,almarah etc at the rate of 5 litres of emulsion per sqm of surface area incl making hole and drill all as specified and directd by Engr-in Charge
Treating as ATT the soil along with external perimeter of building at the rate 2.25 liters of emulsion per meter of the perimeter wall/cruple joint/Juction of wall of surface area incl making hole and drill all as specified and directd by Engr-in Charge
Note (i) Item No 72,116 & 145: If Contractor fail to attend the complaint on same day a recovery of Rs 350 per day per complaint shall be made from his dues till rectify the complaint. (ii) The contractor shall arrange the manpower as and when required given numbers, any time between 8.30 AM to 5.30PM,(sunday & Holiday in case of any urgent required). (iii) Items issued under complaint slip out of supply only items shall be recorded in MB with reference to complaint slip docket No or Number of complaint and old material retrieved shall be issued to contractor under Credit Schedule.
CVS CONSTRUCTIONS
SHREE SAI LABOUR CONTRACT CO-OPERATIVE SOCIETY LTD
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .