Infrastructure Development of Pettigrew College at Ukhrul District, Manipur (Sh- Construction of Academic Block and Main Gate)

Amount

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:2:4(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: 1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with (a) 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, columns, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement: (a) 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

BLOCK-A Ground Floor walls

Floor-I walls

Floor-II walls

BLOCK-B Ground Floor walls

Floor-I walls

BLOCK-C Ground Floor walls

Floor-I walls

BLOCK-A,B,C Parapet

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Staircases with sloping or stepped soffits i/c risers and stringers excluding landing.

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Providing and fixing in position collapsible steel shutters with vertical channels 20mm x 10mm x 2mm & braced with flat iron diagonals 20mm x 5mm sizes with top & bottom rails of T iron 40mm x 40mm x 6mm with 38mm dia steel pulleys complete with bolts & nuts locking arrangement, stoppers, handles i/c applying a priming coat of red lead paint.

ALUMINIUM WINDOWS

Providing & fixing aluminium works for doors windows, ventilators and partions woth extruded built up standard tubular sections/ appropiate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixed wiyh rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/ Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of engineer-in-charge. (Glazing and panelling to be paid for separately): For shutters of doors, windows & ventilators including, provision and fixing hinges/ pivots and making provision for fixing wherever required including the cost of EPDM rubber / neoprene gasket required ( Fittings shall be paid for separately). (a) Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge(Cost of aluminium snap beading shall be in basic itemn):- (A)With float glass panes of 4mm thickness.

Steel work welded in built up section, framed work in cutting , hoisting, fitting in position & priming coat of red lead paint in grating, framed guard bars, ladder, railing, brackets and similar works.

In staircases i/c stringers,treads,landings,hand rails etc.

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position. (a) Local best quality Teak

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws. (a) Local best quality Uningthou

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

Providing and fixing false ceiling at all height including providing and fixing of frame work made os special sections, power pressed from MS sheets and galvanised and zinc coating of 120 gms per sq. meter (both sides inclusive) as per IS 277 and consisting of angle cleats of 25 mm wide x1.6 mm thick with flanges of 27 mm and flanges of 20mm and 30 mm long, the perimeter of ceiling to wall by partition with the help of rawl plug at 450 mm centre to centre with 25 mm long dry wall screw @ 230 mm interval, including fixing of gypsum board to 12.5 mm thk tapered edge gypsum plain board conforming to IS : 2095-Part I

FLOORING

20 mm thick cement plaster skirting (upto 30cm height) with cement mortar 1:3 (1 cement:3 coarse sand ) finished with a floating coat of neat cement i/c. rounding of junctions with floors.

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

Marble stone slab flooring over 20 mm ( average ) thick base of cement mortar 1 : 6 ( 1 cement : 6 coarse sand ) laid and jointed with grey cement slurry including rubbing and polishing complete with White Marble slab 20mm thick

TUBULAR TRUSSES/STEEL WINDOWS/ALUMINIUM WINDOWS

Steel work in build up tubular trusses including cutting, hoisting, fixing in position and applying ba coat of approved steel primer red oxide zinc chrome primer conforming to (IS:2074-1979) welded and bolted including special shape washer etc. complete.

PROFILE SHEET ROOFING (DYNA)

Trapezoidal Pre-painted Profile sheet roofing of approved brand DYNA roof or equivalent with selt drilling screws of 68mm long Xylon coated of purlins & trusses. Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

Trapezoidal Pre-painted Profile sheet for Ridges Gutter or valley 610mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling roof or equivalent screws of 68mm long Xylon coated screws with PVC washer & caps completed ,excluding the cost of purlins ,rafter & trusses.Pre-painted Galvalume sheet(PPGL) i) Profile sheet 0.50mm/4.20kgs/sqm

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3f/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 f/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls with water proofing cement paint of approved quality on new work (two or more coats ) to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

CHLORINATED POLYVINYL CHLORIDE (CPVC) pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. including cutting chases and making good the walls etc.External work a).50mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work -Conceal work a).32mm dia

SANITARY FITTINGS COMPLETE

Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm Sand Cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a).White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : a).One urinal basin with 5 litre white P.V.C. automatic flushing cistern

BRASS AND CP BRASS FITTINGS

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :a).15 mm nominal bore

Providing and fixing brass stop cock of approved quality. a).15 mm diameter

Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. a).2000 litres net capacity storage tanks

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :a).Rectangular shape 453x357 mm

Providing and fixing 600 x 20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type )

Providing and fixing C.P. brass toilet paper holder

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

SH:-PVC Pipes and Fitting

Providing and fixing PVC soil ,waste and vent pipes.External a).100mm dia

Providing and fixing PVC vent cowl.a).100mm dia

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc. including cost of cutting holes and making good the walls etc.

Providing and fixing PVC soil ,waste and vent pipes.a).75mm dia

Providing and fixing PVC NAHANI TRAP.a).75mm

Providing and fixing grating of approved quality for Nahni trap.a).Stainless Steel

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.A).Flexible pipe--32 mm dia

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge.A).110mm dia

Supply and installation of water pump Tulu(Texmo) 1HP of approved quality.

SEPTIC TANK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres Hard/Dense Soil

Filling available excavated earth(excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1 cement: 4course sand: 8 graded stone aggregate 40mm. nominal size

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size).

Steel reinforcement for R.C.C work including straightening,cutting, bending, placing in position and binding all complete.a)Thermo mechanically treated bars

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a).Foundation, footing, bases of columns etc. and mass concrete.

b).Flat surface such as suspended floor, roofs landings and the like floors etc. upto 200 mm in thickness

c).Vertical surface such as walls (any thickness), partition and the like i/c attached pilasters, buttresses, plinth and the string courses and the like

Providing and fixing C.I. Cover frame (for manhole and chambers).a).600 mm x 450 mm (heavy duty)

WATER RESERVOIR

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres a).Hard/Dense Soil

Filling available excavated earth(excluding rock) in trenches,plinth sides of foundation etc. in layers not exceeding 20 cm in depth,consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

P/L cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1 cement: 4course sand: 8 graded stone aggregate 40mm. nominal size

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size).

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1:2 (1 cement:1 coarse sand:2 graded stone aggregate 20mm nominal size).

Steel reinforcement for R.C.C work including straightening,cutting, bending, placing in position and binding all complete.a)Thermo mechanically treated bars

Providing form works i/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

(a).Foundation, footing, bases of columns etc. and mass concrete.

b).Flat surface such as suspended floor, roofs landings and the like floors etc. upto 200 mm in thickness

c).Vertical surface such as walls (any thickness), partition and the like i/c attached pilasters, buttresses, plinth and the string courses and the like

Providing and fixing C.I. Cover frame (for manhole and chambers).a).600 mm x 450 mm (heavy duty)

IEI & FIRE FIGHTING

Writing for light point with 1.5mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch, modular plate suitable size GI-Box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

1. Group A

2. Group B

3. Group C

Wiring for light point/power plug point with 2x4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc as reqd.

a) Light Plug Point

b) Power Plug Point

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 am modular socket outlet and 5/6 amp modular switch, connection painting etc as reqd. (for light plugs to use in non residential building)

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket outlet and 15/16 amp modular switch, connection painting etc as reqd. (for light plugs to use in non residential building)

Wiring for Circuit/Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

1. 2x1.5mm2 + 1x1.5mm2 earth wire

2. 2X2.5mm2 + 1X2.5mm2 earth wire

3. 2x4mm2 + 1x4mm2 earth wire

4. 2x6mm2 + 1x6mm2 earth wire

S/F 20W, LED New E-Lite LED triyca batten tube fittings, Havells

S/F recessed 15 W LED Downlight with all accessories i/c connection etc.

S/F 56" sweep (1400 mm)AC ceiling fan complete with down rod, canopy, 3(three) blades but without regulator etc as reqd. (Make Bajaj / Usha or Similar)

Supplying and fixing stepped type electronic fan regulator on the existing PVC Switch box i/c connection etc as reqd.

S/F 450 mm sweep exhaust fan complete with all accessories i/c connection etc as reqd.

S/F Single Pole 5 amp to 32 amp. Rating 230 V 'B' series MCB for lighting & other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F 63 A double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

S/F (following rating) double pole 230V moulded case circuit breakers (MCCB) AC-415V having a sensitive current upto 300MA in the existing MCB DB complete with connection testing and commissioning etc. as reqd.a) 100 Amp. 4 Pole 230V 300MA

S/F (following way) single/double pole and neutral, sheet steel MCB distribution board, 240V on surface/recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatised and powder pained including earthing etc. as reqd. (but without MCB/RCCB/Isolator).

S/F of (the following) metal boxes with phenolic laminated sheet cover in front : a) 200mmx250mmx100mm deep

S/F bus bar chamber with four strips Cu bus bar of length 600mm suitable for 63A capacity complete with all accessories i/c connection, earthing the body etc. as reqd.

S/F wall mounted metal board of welded construction with minimum 35mmx35mmx6mm, angle iron frame work with 25mmx6mm flat iron as intermediate members i/c connection etc as reqd.

Earthing with copper earth plate 600mmx600mmx6mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. (with charcoal or coke and salt) as reqd.

P/L earth connection from earth electrode with 4mm dia copper wire in 15mm dia G.I Pipe etc as reqd.

P/F 8 SWG dia copper wire on surface or in recessed for loop earthing along with existing surface/recessed conduit wiring/sub-wiring/cable etc. as reqd.

FIRE FIGHTING

Supply and installation of fire hydrant pipe as per required dia as in the following

150 mm dia

80 mm dia

Supply and fitting of cast iron butterfly valve

150 mm dia

Providing and installation of cast iron NRV 1.6 rating

150 mm dia

Supply and fitting of ms support

Supply and fitting of pressure gauge as per requirement

supply and installation of internal landing valve of 63 mm

Supply and installation of hose cabinet suitable for one hose pipe , branch pipe with front glass and fire code paints

Supply and installation of RRL hose pipe of 63 mm dia, 15 mtr long

Supply and installation of Hose drum with 20 mm RRL nozzle fitted

Supply and installation of branch pipe

Supply and installation of fire fighting pump

Supply and installation of fire fighting pump panel

Supply and installation of ABC type fire extinguisher 4 kg

Supply and installation of CO2 type fire extinguisher

Supply and installation of 2 way fire hydrant inlet

Supply and installation of plastic tank

Supply and installation of 25 mm gate valve

Construction of Main Gate

EARTHWORK

Earthwork in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms, lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres (Hard/Dense Soil)

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 meters lift upto 1.5 metre.

Filling in plinth with sandy soil under floor including watering, ramming,consolidation and dressing complete.

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in 1:4:8(1cement:4coarse sand :8graded stone aggregate 40 mm nominal size)

DAMP-PROOF COURSE

Providing and laying damp-proof course 50 mm thick with cement concrete 1:2:4 (1 cement :2c/sand :4 course aggregate 20mm nominal size )

Extra for providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturer's specification.

Applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per sqm on damp-proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in Kerosene oil.

RE-INFORCED CEMENT CONCRETE WORK

Providing and laying in position specified grade of reinforced cement concrete,excluding the cost of centering,shuttering,finishing and reinforcement-All work up to plinth level: 1:1:2(1 cement :1 coarse sand:2 graded stone aggregate 20mm nominal size)

Reinforced cement concrete works in beams,suspended floors,roofs having slope up to 15˚ landing,balconies,shelves,chajjas,lintels,bands,plain window sills,staircases and spiral stair cases up to floor five level excluding the cost of centering,shuttering,finishing and reinforcement,with 1:1.5:3(1 cement :1.5 coarse sand:3 graded stone aggregate 20mm nominal size)

Reinforced cement conerete work in walls(any thickness),including attached pilasters,buttresses,plinth and stringcourses, fillets, column, pillars,piers,abutments,posts and struts etc.up to floor level excluding cost of centering,shuttering,finishing and reinforcement: 1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)

STEEL REINFORCEMENT

Steel reinforcement for R.C.C work I/c straightening,cutting,bending, placing in position and binding all complete(Thermo-Mechanically Treated bars

BRICKWORK

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:3 (1cement:3coarse sand)

IN SUPERSTRUCTURE

Extra for brick work in superstructure above plinth level upto 1st floor level

HALF BRICK MASONRY

Half brick masonary 2nd class (local 1st class) in cement mortar 1:3 (1 cement: 3 coarse sand) in superstructure

Ground Floor walls

Parapet

FORMWORK

Providing formworks I/c centering and shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in

Foundation, footing, bases of columns etc. and mass concrete

Flat surface such as suspended floors,roofs,landing and the like

Columns, pillars, posts and struts (square,rectangular or polygon in plan )

Sides and soffits of beams, beam haunchings, cantilivers, girders, bressumers and lintels exceeding 1m in depth.

Chullah hood,weather shade,chajjas,corbels etc.i/c edges

STEEL WORK

Providing & fixing M.S. fan clamp type I of 16 mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs during laying i/c painting the exposed portion of loops, all per standard design complete

Aluminium glazed windows and ventilators of stadard aluminium extrusion sectin joints mitred and riveted / screwed with 15x3 m lugs 10 cm long with steel plugs embedded in cement concrete block 15x10x10 cm of 1:3:6 and screws of rawl plugs including providing and fixing of glass panes 4mm thick all complete.

Steel work welded in built up sections, framed work in cutting, hoisting, fitting in position & priming coat of red lead paint. (a) In gratings, framed guard bars, ladders, railings, brackets and similar works.

Steel work in single sections i/c cutting hoisting and fixing in position and applying primer. (b) In M.S. Flat / Plate

WOOD WORKS

Providing wood works in frames of doors, windows, clearstory windows and other frames wrought, framed and fixed in position. Local best quality Teak Wood

Providing and fixing 38 mm thick panelled glazed or paneled and shutters for doors,windows and clearstorey windows I/c bright finished brass hinges with necessary screws. Local best quality Teak Wood

Providing 40x3 mm flat iron hold fast 40 mm long fixing to frames

Providing and fixing bright finished steel 100 mm door mortise latch and a pair of lever handles with necessary screws complate (Indian make of approved quality)

Providing and fixing M.S. Tower bolts (barrel type ) with screws 200x10mm

Providing and fixing M.S.Pressed Butt hinges bright finished with necessary screws etc.125 x 65 x3 mm

FLOORING

White ceramic glazed tiles 7.3 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement.

White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3(1 cement:3 coarse sand) & jointed with white cement slurry.

FINISHING

Internal wall plaster 12 mm thick with cement mortar 1:3 (1 cement :3C/sand )

External wall plaster 15 mmthick with cement mortar 1:3 (1cement :3 C/sand )

RAIN WATER PIPES

Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1:2(1 cement : 2 fine sand).100mm dia.

Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm x 112.5 mm of 1:2:4 mix (1 cement: 2 coarse sand :4 hard stone ballast 20 mm & down gauge). 100 mm dia.

Providing & fixing on walls face G.I. head for rain water pipe i/c filling the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

Providing & fixing on walls face G.I. band for rain water pipe i/c fitting the joints spun yarn soaked in neat cement slurry & cement mortar 1:2 (1cement: 2 fine sand). 100 mm dia.

CEMENT PAINTING - ORDINARY

Applying one coat of cement primer of approved quality on wall surface

Finishing walls with water proofing cement paint of approved quality on new work (two or more coats ) to give an even shade.

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete.

PRIMING COAT

Applying ready mix priming coat, pink primer of approved quality of wood work

SUPERIOR READY MIXED PAINTING

Painting (two or more coats) with superior ready mixed paint for woodwork of approved quality in all shades on new work to give an even shade.

SUPERIOR GLOSS ENAMEL PAINT

Painting (two or more coats) with superior gloss enamel paint of any shade of approved quality on new steel work to give an even shade.

PLASTIC EMULSION PAINT

Painting on wall with (two coats) of plastic emulsion paint of approved quality in all shades on new work to give an walls to give an even shade

MISCELLANEOUS

Providing under layer for plinth protection of 75 mm thick rammed & consolidated & grouted with fine sand i/c preparation of ground.

Providing plinth protection of 50 mm thick in cement concrete 1:3:6(1cement3coarse sand 6graded stone aggregate of 20mm nominal size)i/c finishing the top surface of concrete smooth

CHLORINATED POLYVINYL CHLORIDE (CPVC) pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. including cutting chases and making good the walls etc. External work a).40mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work -Conceal work a).32mm dia

SANITARY FITTINGS COMPLETE

Providing and fixing white vitreous china pedestal type water closet Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: a).W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a).White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in -charge.

BRASS AND CP BRASS FITTINGS

Providing and fixing 2-in- 1 C.P angle valve or similar quality complete . a).15 mm diameter.

Providing and fixing brass stop cock of approved quality. a).15 mm diameter

Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m above ground level. a).1000 litres net capacity storage tanks

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :a).Rectangular shape 453x357 mm

Providing and fixing 600 x 20 mm C.P. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws (Hook type )

Providing and fixing C.P. brass toilet paper holder

Providing and fixing liquid soap container of glass with C.P. lid and brackets fixed to wooden cleats with C.P. brass screws.

SH:-PVC Pipes and Fitting

Providing and fixing PVC soil ,waste and vent pipes.External a).100mm dia

Providing and fixing PVC vent cowl.a).100mm dia

Providing and fixing MS holder bat clamps of approved design to 100 mm HCI pipe socket i/c cost of cutting holes and making good the walls etc.

Providing and fixing PVC NAHANI TRAP.a).75mm

Providing and fixing grating of approved quality for Nahni trap.a).Stainless Steel

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.A).Flexible pipe--32 mm dia

IEI & FIRE FIGHTING

Writing for light point with 1.5mm2FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular type switch, modular plate suitable size GI-Box and earthing the point with 1.5mm2 FR PVC insulated copper conductor single core cable etc. as reqd.

1. Group A

2. Group B

3. Group C

Wiring for light point/power plug point with 2x4mm2 FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit along with 1 no. 4mm2 FR PVC insulated copper conductor single core cable for loop earthing etc as reqd.

a) Light Plug Point

b) Power Plug Point

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 am modular socket outlet and 5/6 amp modular switch, connection painting etc as reqd. (for light plugs to use in non residential building)

S/F suitable size GI box with modular plate and cover in front on surface or in recess i/c P/F 6 pin 15/16 and 5/6 amp modular socket outlet and 15/16 amp modular switch, connection painting etc as reqd. (for light plugs to use in non residential building)

Wiring for Circuit/Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit etc. as reqd.

1. 2x1.5mm2 + 1x1.5mm2 earth wire

1. 2X2.5mm2 + 1X2.5mm2 earth wire

2. 2x4mm2 + 1x4mm2 earth wire

2. 2x6mm2 + 1x6mm2 earth wire

S/F integral HID lamp post top lantern HTMV 125W with mushroom shape roto mould diffuser complete with accessories i/c connection etc. (ref code no. BJMPTI 80 MVLPF/524810)

S/F recessed 15 W LED Downlight with all accessories i/c connection etc.

S/F 48" sweep (1200 mm)AC ceiling fan complete with down rod, canopy, 3(three) blades but without regulator etc as reqd. (Make Bajaj / Usha or Similar)

Supplying and fixing stepped type electronic fan regulator on the existing PVC Switch box i/c connection etc as reqd.

S/F 305 mm sweep exhaust fan complete with all accessories i/c connection etc as reqd.

S/F Single Pole 5 amp to 32 amp. Rating 230 V 'B' series MCB for lighting & other load in the existing MCB DB complete with connection testing & commissioning etc. as reqd.

S/F 63 A double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd.

Supply and installation of CO2 type fire extinguisher

M/S Mingyao Ruivanao and co

M Gunananda Sharma