11 KV LINE SHIFTING AND RELEASING 8 KW COMMERCIAL LOAD UNDER EDD I MEERUT

Amount

iw.kZ tek ;kstuk esa Jh jkds'k dqekj iq= Jh jes'k pUn lkbZV ikapyh] ckxir jksM] esjB dh lkbZV ij fLFkr Mcy iksy ,oa IykV ds Åij ls xqtj jgh 11 dsoh ykbZu dks f'k¶V djuk%&

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends :-

PCC Pole 8.5 mtr. Long/ST Pole 11 Mtr. Long

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel etc.

Cartage of following material from JE, Store to site of work including loading & unloading at both ends :-

PCC Pole 8.5 mtr. Long/ST Pole 11 Mtr. Long

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel etc.

Erection of PCC Pole 8.5 mtr. Long/STP Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV HT/LT Line

Making a section pole to exist pole jumpring of HT side and all 11 kv accessories

Erection of stay rod complete after digging a pit of size 1.20 x0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying lifting stringing of proper sagging of ACSR weasal/rabbit conductor for 3 phase, 3 wire 33 KV line including binding & jumpering properly.

Dissmentling of Damaged & Broken PCC/ST pole/R.S. Joist by digging the pits & removel of complete HT/LT line accessories for double pole

Grouting of PCC/STP Pole as per respo

Dismentling of ACSR Conductor removal of complete HT/LT line accessories

providing and fixing stay clamps.

Providing and fixing Holding clamps.

Providing and fixing LT Clamps

Providing stay insulator

Providing and fixing bolts and nuts

Dismentling of 25 KVA T/F

Cartage of 25 KVA T/F site to JE store

Cartage of line material site to JE store

Cartage of RS Joist/Rail Pole site to JE store

Jh vfer ftUny iq= Jh egs'k ftUny lkbZV [kljk la[;k 83] xzke uaxyk tekyiqj ckxir jksM] esjB dks 08 fd0ok0 Hkkj dk okf.kT; la;kstu fuxZr djuk%&

Cartage of following material from store center Meerut to JE Store including loading & unloading at both ends :-

PCC Pole 8.5 mtr. Long/ST Pole 11 Mtr. Long

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel etc.

25 KVA T/F including complete related material required for transformer

Cartage of following material from JE, Store to site of work including loading & unloading at both ends :-

PCC Pole 8.5 mtr. Long/ST Pole 11 Mtr. Long

Line material such as 11 KV Cross arms 11 KV pin, 11 KV pin insulator, 11 KV Disc, Stay rod, Stay wire ACSR weasel conductor, GI Wire, MS angle iron & MS Channel etc.

25 KVA T/F including complete related material required for transformer

Erection of PCC Pole 8.5 mtr. Long/STP Pole 11 mtr long after digging a pit of size 1.20 x 0.60 x 1.6 mtr in all type of Soil including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of all 11 KV HT/LT Line

Erection of Double pole on PCC/STP after digging a pitt of size 1.20 x 0.60 x 1.6 mtr in all type of Soil for each pole including back filling of the pole with proper ramming after completion of work.

Fabrication and fixing of MS angle and MS channel, fixing all 11 kv accessories TPMO, Fuse set, 11 kv pin insulators as per double pole

Mounting of 25 KVA T/F with proper jumpring of HT side and fixing of cable on LT side of T/F

Making a section pole to exist pole jumpring of HT side and all 11 kv accessories

Erection of stay rod complete after digging a pit of size 1.20 x0.60 x 1.6 mtr and grouting the same in block of size 0.60 x 0.60 x 0.30 mtr and nuzzling at the both ends and filling the pit with excavated earth soil with proper ramming.

Laying lifting stringing of proper sagging of ACSR weasal/rabbit conductor for 3 phase, 3 wire 33 KV line including binding & jumpering properly.

Earthingh of each 11 KV line & T/F properly after drive of electrodes if size 20mm x 250 mm and connection the earthing point with GL wire.

Grouting of PCC/STP Pole as per respo

Cutting & chopping tree branches near side of line for making the clearance between line and tree

Providing and fixing Holding clamps.

Providing and fixing LT Clamps

Providing stay insulator

Providing and fixing bolts and nuts

SHASHI ENTERPRISES

Hi-tech power transmission