SPECIAL REPAIRS TO CHAIN LINK FENCING OFFICERS ACCN PROVISION OF CLOTH DRYING ARRANGEMENT WITH AWNING IN BLOCK OF BUILDINGS AND PROVN OF 1 TOILET BLOCK NEAR MT COMPLEX AT DSSC WELLINGTON

Amount

Dismantling post/struts (wood, steel or RCC) of any section embedded in concrete including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling MS steel work of any descrption not other wise provided for complete all as specified and as directed.

Dismantling fencing wire mesh of any type and thickness complete all as specified and as directed.

Dismantling barbed wire of any type complete all as specified and as directed.

Excavation in Post Holes (or similar holes) each not exceeding 0.5 Cum and getting out in hard/dense soil, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed.

M&L for providing PCC 1:3:6, type C2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work complete all as specified and as directed.

S&F mild steel posts and struts in fencing including cutting tops to shape as directed., drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends,each screwed and to be fitted with washer and the hexogonel or square nut dia 5 to 10 mm not exc 5cm long complete all as specified and as directed.

Supply only chain link MS galvanised fencing of any size or type and any thickness complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and as directed.

Supply only MS round bar 10 mm dia fixed indepently including hooking ends for chain link fencing conforming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F 2 strand steel barbed wire 2.24 mm dia barbs at 75 mm spacing and fixing to MS round bar nibs to RCC/Steel posts with new GI wire complete all as specified and as directed. Note :- Each line of wire to be measured) complete all as specified and as directed.

S&F mild steel for Framed work as in doors or gates of square/rectangular tubular pipe or angle iron or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and pintel hinges or steel hanging door fittings, inclusive of steel sheeting or other covering, running rails and guides, CI ornaments fitting; also fastening and fixing complete and similar work confirming to Fe-290 Gde E- 165 complete all as specified and as directed.. Note :- All CI oranamental fittings etc will be measured by weight and paid in this items, no extra amount will be paid of any item to the contractor. Gate will be made as per sample as main gate of Glencoe or as directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide zinc crome primer on new steel surface of any description over 10 cm width or girth not otherwise described incl preperation of surfaces complete all as specified and as directed.. Make : Apcolite in Asian Paints/ Luxol in Berger/Stain Enamel in Nerolac

M&L for applying two coats of synthetic enamel paint over one coat of red oxide primer including preperation of new steel surfaces, not exc 10cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.. Make : Apcolite in Asian Paints/ Luxol in Berger/Stain Enamel in Nerolac

M&L Reinforced cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M&L Reinforced cement concrete type B1, 1:2:4 (20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished scerfaces of Concrete complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions rough finished flat surfaces. complete all as specified and as directed.

M&L Mild steel bars TMT 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Deseriptions all as per item No 20 above but 8 mm dia & over upto and including 10mm dia in stirups, spacers and binders complete all as specified and as directed.

S&F Polycorbonate any colour (as approved) plane solid sheeting 4mm thick with side lap fixed with coach screw and washer in door, wall, gate, roof etc complete all as specified and as directed.

M&L for Granite of 18-20 mm thickness jet black (of any type) work (table rubbed and polished) in steps, jambs, Gate pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl 15mm thick screed bed in CM 1:4 including polishing, rounding /notching of ends and making hole for inserting of pipe complete all as specified and as directed.

M&L for 40mm dia Tubes, 'medium grade' galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and as directed.. Make : JINDAL/TATA/ZENITH /PRAKASH/ SURYA

M&L for 80mm thick rubber moulded machine pressed precast concrete interlocking paver block of any shape with grey cement & pigment and size confirming to IS 15658-2006, M-40 Grade including 50mm thick M sand cushion layer complete all as specified and directed.

M&L for providing 100mm thick PCC 1:4:8, type D2, using 40mm graded stone aggregate as a sub base complete all as specified and as directed.

Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out hard/dense soil complete all as specified and as directed.

Excavation in trenches n.exc 1.50 m wide and n.exc 1.50m in depth in foundation in hard/dense soil and getting out complete all as specified and as directed.

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm. complete all as specified and as directed.

Removing excavated material (soil) to a distance n. exc. 5.00km and depositing where directed. at a level n.exc 1.50 m above the starting point in soils. complete all as specified and as directed.

Demolition of brick work/PCC block masonry/stone masonry etc built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete all as specified and as directed.

M&L pre-cast cement concrete block in cement concrete masonry 1:3:6 type B-1 (using 20 mm graded stone aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and as directed.

M&L Rendering 15 mm thick cement plaster 1:6, on stone masonry surfaces other than fair face of brick work or on one side lathing and finishing the surface even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather coating exterior emulsion (APEX ULTIMA of Asian Paints/ Weather Coat smooth in Berger/Nerolac Excel Top Guard of Nerolac) over a coat of primer on walls complete all as specified and as directed.

S & F mild steel frame works such as joist, channel, angle or tee sections, posts, rafters, purlins, trusses, connecting plates, etc., fixed independently conforming to Fe-410-W (Gde E-250) quality-A complete all as specified and as directed.

S & F mild steel works as in framed roof members, rafters, purlins, trusses, connecting plates, cleats, etc., including distance pieces conforming to Fe-410-W (Gde E-250) quality-A complete all as specified and as directed.

M & L for PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in padding, coping, bed plates, hold fast blocks, levelling courses, etc., including formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.

Supply and fix for easy dry ceiling/weather shed fitted system of pulley operated cloths drying system consisting of 4 Nos anodised aluminium pipes, each of outer dia 22mm and inner dia 19.80mm and pulleys made up of delrin with rope guide mounted one channel pair of length 24 inches (distance between 2 pipes is adjustable) locking system to hide rope knot, channel to be mounted or fixed with self taping screws provided in it and including rope will be polyster braided undyed of 4mm dia of model pull it 8 feet including necessary fitting etc., complete all as specified and as directed. Make :Easy dry system Pvt Ltd(EDSPN) or techno-commercially equivalant make as approved by GE in writing.

S & F mild steel small article works such as bands, straps, holdfasts, wall ties, clamps, wind ties, cleats etc., and similar small articles conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S & F pre-painted galvalume zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self tapping screw/hooks type complete all as specified and as directed.

PROVN OF 1X TOILET BLOCK NEAR MT COMPLEX:(Items No.41 to 142 of BOQ) Excavation in trenches n. exc. 1.5 metre wide and not exc. 1.5 metre in depth and getting out as in Hard/Dence soil for foundation etc complete all as specified and as directed.

Excavation over areas n exc. 1.5m deep iand getting out as in Hard/Dence soil for foundation etc complete all as specified and as directed for retaining wall.

Description all as item No 42 above, but exc 1.5m but n.exc 3.0m complete all as specified and as directed.

M&L for Cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in foundations, filling and mass concrete and getting out as in Hard/Dence soil complete all as specified and as directed.

M&L for precast solid block 1:3:6 type C1 (using 20mm graded stone aggregate) masonry exceeding 10 cms in width and set in cement mortar 1:6 all as specified and as directed

Providing precast cement concrete solid building blocks or slabs 10cm thick type B-1 using 20mm graded stone aggregate and setting in mortar,(1:4) complete, in walls all as directed by the Engr In Charge.

Taking down cement plaster of any description, including raking out joints, hacking for key, scrubbing down with water etc., all as specified and as directed.

M&L for Reinforced cement concrete (nominal mix) type B- 1(1:2:4) using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc all as specified and as dircted.

M&L Providing precast cement concrete (1:2:4) type B-1 (using 20mm graded stone aggregate) set in cement mortar 1:6 in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves,cooking platform and similar articles with plain faces complete as specified and as directed.

M&L Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including sup- ports, overhangs,etc. also splays between floors and beams, etc.all as spd and directed.

S&F TMT bars Mild steel bars 10mm and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Description all as item No 51 above, but but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders

M&L for Providing precast cement concrete louvres and jallies,25mm thick type B-0(1:2:4) using 12.5mm grade stone aggregate including all mould- ings and set in CM(1:4) complete all as directed and specified.

M&L for M-Sand filling under floors or in foundations including watering and consolidation complete all as spd and directed

M&L hardcore of gauge n.exc 63 mm deposited, spread & levelled in layers n. exc 15 cm thick, watered & rammed to a true surface with broken stone or boulders complete as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 (40 mm graded aggregate) as in Sub base floor finished even and fair as in sub base of floor etc all as directed by the Engineer In Charge.

M&L Providing 25mm thick cement concrete type B0, 1:2:4 using 12.5 mm graded stone aggregate .as in floors for levelling course including finish the surface

M/L for non skid ceramic coloured tiles 7mm to 8 mm thick(square/rectangular) area of each tile exceeding 0.11Sqm, but not exceeding 0.18 Sqm , in floors over and including 15mm thick screed in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shades of tiles complete as specified and as directed.

M&L for glazed coloured ( 350mm x 450 mm/ 600mm x300mm) x 7 mm th as in skirting/dado over & including 15mm th rendering in CM 1:4 set on stone masonry or other than brick masonry and jointed in neat cement sullry and pointed in white or coloured cement to match complete as specified and as directed.

M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface including finishing the surfaces even and smooth without using extra cement in CM 1:6 complete all as specified and as directed .

M&L 15mm thick rendering plaster brick or concrete surface in CM 1:4 including adding water proofing compound as per manufacturer's instruction complete all as specified and as directed . Note:Liquid water proofing compound will be measured and paid separately.

M&L 15mm thick rendering plaster on fair face of brick-work or concrete surface incl finish the surface even and smooth with using extra cement in CM 1:4 complete all as specified and as directed .

Supply only Liquid water proofing compound

Material and labour for Granite work with 20mm thick machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:3, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing and rounding to edges of stone slabs etc., complete all as specified and as directed.

Supply and fix Solid PVC Door Frame of size 50mm x 47mm made out of 5mm wood grain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing

Supply and fix Factory made solid panel pace door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded wood grain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and wood grain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of wood grain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.

S&F factory made steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed incl taking down old damaged steel ventelator.

S&F Mild steel butt hinges 75mm long, medium weight, cold rolled.

S&F Extruded aluminium alloy handles 125mm long, Aluminium handles, cast type, anodised.

S&F Aluminium anodised barrel tower bolts,125 mm long, of extruded section.

S&F 250 mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium complete all as specified and as directed.

M & L for PCC 1:3:6 type C-2 using 40mm graded stone aggragate steps; seismic and other similar bands,plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones,bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as directed

M&L for MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains;hand made sliding bolts; clamps;hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee pieceinserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete as specified and as directed.

S&F figured glass pin head type and glazing 3mm thick with oil putty in squares with oil putty in squares n.exc 0.5 sqm in each pane.

S&F Water closet vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connecting to trap and flushing pipe anti syphon pipe etc provision of lime concrete bedding complete as specified and as directed.

Supply and fix10 litre capacity low level PVC flushing cistern (white), syphonic action type, with inlet, ball valve, float, handle, fixed with cast iron bracket (of suitable size) and providing 32 mm dia PVC flush pipe and making all necessary connections complete all as specified and as directed.

Supply and fix galvanised steel water tubing 15 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

Supply and fix galvanised steel water tubing 20 mm bore, medium grade with all fittings and fixed complete to walls/ceiling or laid in floors complete all as directed by the Engr-in-Charge.

S&F 25 mm bore Galvanised iron tubing, medium grade, with all fittings laid in trenches, floors or fixed to walls etc complete all as specified and as directed.

M&L for MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as directed by the Engr In Charge.

M & L for mild steel work as in tubular roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat, square tube etc sections) including distance pieces, cleats etc. Fe 410-W (Gde-E- 250) quality- A complete all as specified and as directed.

S & F for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet crumped where ever required 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws complete all as specified and as directed.

S & F for pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof coverings fixed with self tapping screws complete all as specified and as directed.

M/L preparing new surface of steel and appling two coats of synthetic enamel paint over a coat of primer red oxide complete as specified and as directed.

Supply & Fix Bib cock 15mm bore cromium plated (Fancy) long nose with wall flange and aerator complete .Make : CERA ,Cat part No : F2002152 or techno commmercial equivalent Make Hindware/ Jaquar as approved by GE. screwed down for 15mm bore GI Pipe or for brass ferrule complete as specified and as directed.

S& F Pillar cock cromium plated with wall flange complete .screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly-nuts, screwed for iron pipe and fixed in repairs complete all as specified and directed. Make : CERA ,Cat part No : QTF2006101 or techno commmercial equivalent Make Hindware/ Jaquar as approved by GE.

S&F wall mixer 3-in-1 system with provision for both hand shower and OH shower complete with 115mm long bend pipe, connecting legs & Wall Flange (without hand & over head shower)Make: Cat No G4617A1 of Parryware/ F730022 of Hindware / CON -281KN of Jaquar all as specified and directed.

Supply and fix Angular stop cock 15mm bore, cast copper alloy, chromium plated, fancy type with long shank conforming to IS as per Cat No.CON-053KN of Jaquar or G3053A1 of Parryware, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed.

S&F 25mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 20mm bore, Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete as specified and as directed.

S&F 25mm bore, Ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed,weight 455 gms complete as specified and as directed.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm.

Supply and Fix, 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) complete all as specified and as directed. Make: Sintex/Polycon/Vectus

Supply and fix Vitreous china Wash Hand Basin, White, counter top oval type of size 550x450x200mm as per Cat No.FLS-WHT-5701 of Jaquar (or) C0431 Cascade NXT of Parryware or Cat No.10017 of Hindware or equivalent of other specified makes, fixed over and including including 32mm waste coupling, 32mm dia waste pipe750mm long etc.,including taking down existing one complete all as specified and as directed. Note: The unit rate quoted shall be deemed to include the cost of WHB, Granite slab, brackets, waste coupling and waste pipe

Supply and fixb Vitreous China urinals, bowl type (back or corner wall type),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incuding flush pipe, grating and Union for discharge pipe including urinal spreader(CP),.Make "CERA cat part No :Cat part No :S4020112 and F8070201 or equivalent of Hindware/Parryware complete.

Supply and fix in repairs corner glass shelf made out of glass with cp guard rail and wall fixing accessories of 300mm radius matt finished, chromium plated (MCH/Colour CP) with brass brackets as per Cat No.ACN-1173 of Jaquar or T6010A1 of Parryware fixed on walls complete all as specified and as directed .

Supply and fix CP Towel rail 600mm (24") inclding necessary brass screws etc complete .Make : CERA ,Cat part No : F5003103 or equivalent of Hindware/Parryware complete.

S&F in repair soap dish holder of Make: Cat No T6902A1 of Parryware/ F580004 of Hindware/ ACN 1131N of Jaguar or equivalent all as specified and directed .

M&L PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels/drain inluding necessary from work complete.

S&F in repairs 5.50mm thick looking mirror of size 900x600mm mounted on 6mm thick Plywood backing or AC sheet backing including framing with 1st class hard wood of size 40x40mm decorative type polished and fixed to wooden plugs with chromium plated brass screws and cupwashers/or chamferred glass from all sides fixed with steel screws all as specified and directed by Engr-in-Charge.

M&L for PCC 1:3:6 type C2 using 20 mm graded stone agg 75mm thick as in plinth protection including finish the surface and fair without using extra cement including provding necessary grooving for expansion /dummy joints with 10mm wide and seal the surface with sand filling bitouminous compound complete.

M&L for PCC 1:3:6 type C2 using 20 mm graded stone agg 75mm thick as in pavings or hard standing including finish the surface and rough to receive the top finish.

M&L for chequered cement concrete tiles of size 30cmx30cmx 25mm thick ,set ,jointed and pointed in neat cement slurry in floors with grey cement and pigments of required colour over 20mm thick screed bed or bedding layer in CM91:6) complete all as specified and as directed.

S&F powder coated grid frame work for false ceiling comprising of the following sections for making partitions of 600 x 600m size fixed to walls with rawl plugs & screws and hanged to roof with and including 1mm dia GI wire suspender of suitable length and butterfly clips, size of main tee shall be 24mm x 24mm x0.3mm thick, cross tee shall be 24mm x 21mm x0.3mm thick and wall angle shall be 24mm x 24mm x0.3mm thick complete all as specified and as directed.

M&L 4 mm thick E-board for insulation and accoustic purposes, 595 x 595 mm in size,fixed with staple on snap gird as in ceiling with and including dusting of surface and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S & F PVC (SWR) bends any radious 110 mm bore provided with acess door.

S & F PVC (SWR) bends any radious 75mm bore provided with acess door.

S & F PVC (SWR)110mm bore branch piece single(single T) equal or Unequal

S & F PVC (SWR)75 mm bore branch piece single(single T) equal or Unequal

M&L 0.5mm prepainted galvalum sheet in ridges, hips, valley gutters, drip and straight flashings including necessary cutting,drilling,shaping to required shape as dirceted complete all as specified. Make : TATA/JSW.

S&F in repair 75 mm dia PVC floor trap with cockroach trap and grating (double bowl type) with hole for waste pipewith 100 dia CP grating fix with cement mortar including jointing to waste pipe complete all as specified and as directed.

M&L 150 mm bore PVC(SWR) Pipe layid and jointed completed all as specified and as directed.

M/L PCC 1:3:6 type C2 concrete bed to 150mm dia drain pipes including packing under and hunching against the sides of pipes after they are laid and tested.

M&L for preparation of new or old plastered surfaces of walls applying two coats of distemper, oil emulsion, as per manufacturers instruction complete all as specified and directed.

Material and labour for applying two coat of exterior acrylic emulsion weather proof paint overa coat of primer including preparation of new plasterd surface all as directed by Engr In charge .

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete as in hard /dense soil all as spd and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point all as directed by Engr In Charge.

M & L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLS cable, 1100 volts grade, ISI marked with multi stranded copper conductor drawn through and including non-metallic PVC rigid conduit (medium grade) with all fittings and accessories ISI marked incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLS, ISI marked as earth continuity conductor (green in colour) & incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall for mounting switch, sockets etc. with including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc. complete all as specified & as directed for One Light/fan/Call Bell etc. point controlled by one switch 5/6 Amps. : Make of cable : Havells/Polycab/Finolex.

Description all as per Item No.120, but One switch socket outlet point 5/6 Amps on independent board.

Description all as per Item No.120 above but with FRLS PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor green in colour for 16A switch socket complete.

NOTE for Item Nos 120 to 122: 1) Modular metal flush boxes shall be measured & paid separately. 2) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates.

M & L for Surface sub-main wiring alongwith earth wire of size (2 x 4.0) sq. mm + (1 x 4.0) sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including non-metallic PVC conduit (medium grade) with all fittings and accessories ISI marked for conduits & sinkings for modular boxes & making good to walls, floors etc. complete all as specified & as directed. Make of cable : Havells/Polycab/Finolex,Make of Conduit: Precision/Modi/Pressfit. NOTE : 1) Two runs of PVC wire, one run of earth wire & one run of PVC rigid conduit (medium grade) will be measured as one length. 2) Modular metal flush boxes (if req) shall be measured & paid separately.3) Cutting chases & making good the disturbed surfaces is deemed to be included in the unit quoted rates

S & F Modular switch, one way, 10 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXXW101, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular switch, one way, 16 Amp, 1 Module, 240 volt complete all as specified and as directed. Cat No : ACVSXIW161, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKSWW063, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

S & F Modular shuttered socket outlet 3 Pin, 6/16 Amp, 2 Module, 240 volts, ISI marked complete all as specified and as directed. Cat No : ACVKCWW163, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Note for Item Nos 124 to 127 : Design/Drawing/Technical catalogue/specifications along with comparative Rate Analysis to be submitted to the Engr-In-Charge for Make/Sample approval of items whereever equivalency of Item(s) is concerned other than specified Make/Model/Cat/Part Ref concerned.

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACTXMIIX01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing and concealing modular metal flush box suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACTXMIIX03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 1/2 modules all as directed. Cat No : ACVPPCWV01/02, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

Supply & Fixing modular cover plate suitable for fixing switches/sockets of 3 modules all as directed. Cat No : ACVPPCWV03, Model - Verona of make CRABTREE (Havells) or techno-commercially equiv In Legrand/Anchor Roma/Polycab

NOTE for Item Nos 128 to 131: The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.

S&F ceiling rose surface PVC/ Polycarbonate, Isolated body with face Bakelite three terminal complete all as specified and directed. Make: Havells/Legrand/Anchor

S&F Surface and wall mounted LED batten 10 watts 2 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No: ENDURALINEARNEOBS10WLED865SPCSS or techno-commercially equiv In Jaguar/Philips

S&F Surface and wall mounted LED batten 20 watts 4 feet long, extruded aluminium housing provided for efficient heat dissipation & integrated electronic driver including connecting up with and including twin/three core twisted flexible cable of suitable size in flexible conduit all as specified and as directed incl taking down old/unsv fittings. Make :Havells, Cat No:ENDURALINEARNEOBS20WLED865SPCSS or techno-commercially equiv In Jaguar/Philips

S&F IP >= 66, IK>=07, Class I Environment friendly, energy saving, surface mounted, decorative bulk head edge lit LED luminaire 10W with min 800 lumens made of pressure die cast aluminium housing with suitable fixing arrangement complete with all accessories internally prewired and including connecting up with and including twin core twisted flexible copper conductor cable of suitable size complete all as specified and as directed incl taking down old/unsv fittings. Make : Havells, Cat No HEXAFT10WLED857SSYMBOPC or techno-commercially equivalent in Philips/Jaguar

Supply, install, testing & commissioning of Exhaust fan, PVC body with connected accessories 250 mm sweep, single phase, 240 Volts, AC, 50 Hz,800RPM, Air delivery not less than 860 CMH, noise level less than 45 dB and connecting up complete including louvers and provision of cable 3/2 core of suitable size from ceiling rose to fan in flexible hose and making of suitable sized hole in the wall/existing window/ventillator etc. for fixing of the exhaust fan & making good the disturbed surfaces (if any) complete all as specified & as directed. Make : Havells, Cat No: Ventil Air DX or techno-commercially equivalent in Usha/Crompton. Note :- (i) The cost of making hole in walls/other surfaces & making good the disturbed surfaces incl any framework/cement work/wood work/welding work etc. required for proper fixing of the exhaust fan & matching to the existing surface is deemed to be included in the unit quoted rates.

S & F SPN DB, 8 Way, IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed by Engr-in-Charge.Make: L&T, Cat No: DBSPN008DD or techno-commercially equiv in Legrand/ABB.

S&F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA all as specified and dircted by Engr-in-Charge. Make-L&T, Cat No-BB20320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA. Make-L&T, Cat No-BB10320C or techno-commercially equivalent in LEGRAND/SIEMENS.

S&F single pole and neutral enclosure with a two pin and earth plug and socket complete suitable for fixing one single pole MCB 32A C Series with Breaking capacity 10KA all as directed.Make: L&T, Cat No : DBMPS120SD or techno-commercially equiv in Legrand/ABB

Supply, Fix, Installing and Testing Vertical type Storage electric water heater (Geyser) of 25 Ltrs capacity, Tank made of ultra thick super cold rolled steel plates with high density PUF insulation, 2 KW, 230 V, Single Phase, 50 Hz, AC, BEE 5 Star rated, suitable for a pressure rating of 0.8 MPa Bar with 7 years warranty on inner tank, 4 years on heating element & 2 year comprehensive warranty with & including connected accessories and 2 Nos anchor fasteners of size as per manufacturer instructions grouting and fixing and making good the disturbed surface complete and connecting electrical and water supply connection using steel braided hose 2 Nos complete all as specified and directed by the Engr-in-Charge. Model - BIANCA, Make: Havells, Cat No: GHWCBNTWH025 or techno-commercially equivalent in V-Guard/Bajaj Note : (i) Installed Geyser's warranty card should be submitted to the Engr-in-Charge. (ii)The cost of making good the disturbed surfaces and matching to the existing/original surface is deemed to be included in the unit quoted rates .

Supply, fix and test of LED Flood light luminaire with high power of capacity 30 Watts suitable for working Voltage of 140-270 V AC, 50 HZ with in built power unit, electronic driver etc, pressure die-cast aluminum housing with all fixing accessories, connecting up complete all as specified and directed. Make: Havells, Cat No : JETAQUANTOPLUS FLP30WLED757SYMLENS or techno-commercially equivalent in Philips/Jaquar .

S & F PVC insulated flexible multicore round copper conductor cable of size 3 core 2.5 Sqmm drawing through PVC Conduit including PVC conduit and necessary end connector incl fixing clamp for fixing coduit on wall Surface/pole complete all as specified and directed. Make:Havells, cat No: WHMFDSKB32X5 or techno-commercially equivalent in Finolex/Polycab. Make of Conduit: Precision/pressfit/finolex. Note:One run of PVC insulated flexible multicore round copper conductor cable and one run of PVC Conduit will be measured as one length.

SRIBALAJI AND CO

m/s prabakaran