| 1 | CIVIL JOBS involving designimg and construction of suitable RCC chamber for Bar screen chamber, OGT, equalization tank, , sludge holding tank, Final Treated Water Tank, Sludge Drying Bed | CIVIL JOBS involving designimg and construction of suitable RCC chamber for Bar screen chamber, OGT, equalization tank, , sludge holding tank, Final Treated Water Tank, Sludge Drying Bed for 5 KLD Sewage treatment plant as specified in Scope of work | 1 | LS | DEEPAK@1181 | 90 |
| 2 | | Supplying, Installing, Testing and commissioning of 1 no. Bar Screen and shall be provided in front of the intake works, so as to exclude the large sized particles with associated set of guide angles in SS316, for 5 KLD Sewage treatment plant as specified in Scope of work | 1 | Nos | DEEPAK@1181 | 90 |
| 2 | | Supplying, Installing, Testing and commissioning 2 nos.centrifugal sumersible type raw sewage water pumps (1 working + 1 standby) sewage from equalization sump to aeration tank at uniform flow rate as required with dry run protection, for 5KLD Sewage Treatment Plant as specified in Scope of Work | 2 | Nos | DEEPAK@1181 | 90 |
| 3 | | Supplying, Installing ,testing and commissioning shall consists of coarse bubble diffuser with HDPE pipe grid with necessary orifices HDPE pipe with removable deflector to provide clog-free oxygen for Equalization Tank, for 5 KLD Sewage Treatment Plant as specified in Scope of work | 1 | LOT | DEEPAK@1181 | 90 |
| 4 | Air Diffusion System for STP MBBR 1 and MBBR 2 | Supplying, installing, testing and commissioning shall consists fine bubble diffuser along with membrane, SS 304 clips PVC support pipe, CPVC fitting, nylon rope braided hose with all accessories to make it retrievable & to provide clog- free oxygen for Aeration Tanks, for 5 KLD Sewage Treatment Plant as specified in scope of work | 1 | LOT | DEEPAK@1181 | 90 |
| 5 | | Supplying, installing, testing and commissioning of Twin Lobe design type air blower complete with motors, pulleys, rigid one piece CI casing and side plates, silencer, base plate, anti-friction bearings, rotary oil sealing having horizontal configuration (1 working & 1 Stand by), for 5 KLD Sewage Treatment Plant as specified in scope of work | 2 | NOS | DEEPAK@1181 | 90 |
| 6 | | Supplying, installing, testing and commissioning of filter feed pump Consisting of 2 Nos. centrifuge non- submersible type filter feed pumps( one working + one standby) to feed semi tested water to secondary treatment process through sand pressure to the adequate H.P electrical motor,mounted on a common base frame, for 5 KLD Sewage Treatment Plant as specified in Scope of work | 2 | NOS | DEEPAK@1181 | 90 |
| 7 | | Supplying, installing, testing and commissioning of filter feed pump Consisting of 2 Nos. centrifuge non- submersible type filter feed pumps( one working + one standby) to feed semi tested water to secondary treatment process through sand pressure to the adequate H.P electrical motor, mounted on a common base frame, for 5 KLD Sewage Treatment Plant as specified in scope of work | 2 | NOS | DEEPAK@1181 | 90 |
| 8 | | Supplying, Installing, testing and commissioning of Lamella Clarifier Mechanism to fit into Clarifier tank which will arranged to from a separate sedimentation chamber or the cells between each pair of adjacent plates. The overlapping additive projected area of several plates will be factor of increasing surface settling area proportion to the number of plates used. The inlet flow will divide and enter the tower part of each sedimentation cell from its two opposite sides. As the water will displace upward in smooth, gently flow, the suspended solids coalesce to form precipitates which will settle in the chambers on the lower portion of each lamella plate. Influent water flows upwards over the plates. The deposited precipitates increase in size until they slide or roll down the inclined surface of the plates. This will then collected in the hopper provided at the bottom of the separator, for 5 KLD sewage Treatment plant as specified in scope of work | 1 | LOT | DEEPAK@1181 | 90 |
| 9 | | Supply, installation, testing and commissioning of non-clogging mono block centrifugal sludge transfer pump to transfer sludge from tube settler to fab reactor for seeding only and balance to sludge holding tank and filter press for complete with all accessories motor of following capacity delivery header with isolation valve, pressure gauge on delivery line with isolation cock level controller with wiring to control the level of sump automatically (1 Working & 1 Standby), for 5 KLD Sewage Treatment Plant as specified in scope of work | 2 | NOS | DEEPAK@1181 | 90 |
