REPAIR MAINT OF ROAD SIDE STREET LIGHTS PERIMETER SECURITY LIGHTS JUNCTION BOX HIGH MAST LIGHTS AND CONNECTED CABLE AT TANDA AREA UNDER GE NORTH AKHNOOR

Amount

Taking down old unsv street lights and M&L for LED street light fitting of capacity 60 watt ( 5700 K) with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make Wipro Cat part NoLR02-671-XXX-57-G2 or equivalent in make of phillips, ,Oshram, GE

Takng down old unsv street lights and M&L for LED street light fitting of capacity 90 watt ( 5700 K) with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make Wipro Cat part NoLR02-102-XXX-57-G2 or equivalent in make of phillips, ,Oshram,GE

Takng down old unsv street lights and M&L for LED street light fitting of capacity 40 watt ( 5700 K) with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make Wipro Cat part NoLR02-451-XXX-57-G1 or equivalent in make of phillips, ,Oshram,GE

Taking down old unsv street lights and M&L for LED street light fitting of capacity 25 watt ( 5700 K) with high performance LED, Contemporary designed housing made of die cast aluminium with street optic lens for uniform light distribution rated IP 66 all as specified and directed. Make Wipro Cat part NoLR02-291-XXX-57-XX or equivalent in make of phillips, ,Oshram,GE

Taking down old/unsv flood lights from high mast light of any type and M&L for LED flood light of capacity 250 watt IP 66 Lumainire with aluminium die cast housing toughened glass and unique lens system for enhancement illumination complete with all accessories Make Wipro cat part No LF3 -342-060-57XX or equivalent in specification of make phillips, Oshram,GE

Supply and fixing street light bracket for street light fittings made to shape as directed out of G.I. pipe light grade 32mm bore 1.5 mr long including fixing of light fittings and bracket with MS clamps, nuts and bolts of appropriate size complete all as specified and directed.

M&L for flat aluminium cable size 2.5 sqmm x 2 core required for street light connection all as specified and directed Make Havells, finolex, Anchor (Taking down burnt cable of any size).

Supply , installation in replacement, connecting electrically and testing of street light junction box size 450x250x300mm, pole mounted made out of CRCA sheet 2 mm thick , powder coated having door with magnetic lock complete with bus bar 4 Nos suitable for 3 phase 4 wire supply system, made of alumn strip of size 20X3mm, one single pole 240 volts 'C' Curve type 6 Amps with rupturing cap 10 KA, including fixing arrangement made of MS Clamps of requisite size nuts, bolts and washers complete, all as specified and directed by Engineer in Charge Make DVEPL, Electrifield, Siemen.

Taking down old/burnt cable of any size and Supply and fixing Aerial bunched cable (AB) LT of size 3 core- x16 sqmm+1-core x 16 sqmm+ 1x25 sqmm for street lights .The 16 sq.mm. phase conductor shall be of aluminium solid round; outer diameter shall be within the limits.• The phase conductor shall be insulated with black weather resistant high-densitypolyethylene (HDPE) suitable to 1100 V insulation. The insulated conductors shall generally conform to the relevant standards.• Conductors: The properties of the aluminium wires before stranding shall be:• Tensile strength not less than 90 N/Sq.mm.• Resistivity at 20 Deg. C not exceeding 0.02845ohm / Sq.mm / m(V) and one bare messenger wire shall be stranded non compacted circular aluminium alloy conductor .all as specified and directed. Make Havells, Gloster,Polycab,KEI Note:- The following hardware fittings and accessories shall be used to install,erect and join the AB cable (i) Suspension clamp with eye hook (ii) Suspension fittings and corresponding eye hook (iii) Dead eye fittinngs (iv) Nylon Tie (v) connectors

Material and labour for Earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick buried directely in ground vertically ( earth pit not less than 2.25 meters deep below ground level) with top edge of plate not less than 1.5 metres below ground level, connected to and including galvanised iron wire 4 mm dia and light grade protection pipe of 15 mm dia from earth electrode up to test point or up to 7.5mtr whichever is less by means of GI bolts, nuts, check nuts and washers all as per electrical plate No 3 of SSR Pt-I and GI watering pipe of 20 mm dia medium grade,GI funnel with wire mesh,including charcoal, salt packed all around the earth electrode plate in layers, PCC earth pit chamber 1:3:6 type C1, of size 45cm x 45cm x 45 cm,RCC cover 1:2:4 type B1 of size 45x45x6 cm, excavation/earth work in any strata and returning filling, removal of surplus soil and testing/test point for required value including removing old item complete all as specified and directed.Note:- The required resistance of Earthing shall be less than 3 ohm, If not found to the required resisstance, the contractor has to re earthing for required resistance and the cost for the same included in the quoted rate and no extra shall be paid on failure of getting required resistance.

Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 25 sqmm 3.5 core all as specified and directed. Make Polycab,Gloster,Grandlay

Supply laying and testing XLPE Insulated armoured heavy duty electric cable with aluminium conductor 1100 volts grade, cross sectional area 16 sqmm 4 core all as specified and directed. Make Polycab,Gloster,Grandlay

S & F GI pipe light grade 50 mm bore for cable protection fixed on poles or laid in trenches under floor, ducts etc with fixing clamps, nuts , bolts etc. all as specified.

Excavation in tranches not exceeding 1.5 m wide and not exceeding 1.5 m deep for foundation of laying cable including getting out in soft/loose soil complete all as specified and directed.

Returning filling in including spreading watering and well ramming in layers not exc 25 cm complete all as specifed .

Removing surplus soil to distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed .

M & L for protection to cable with one layer of brick laid flat across the cable using all size sub class 'B' Bricks.

Sand cushioning to under ground electric cables including watering and consolidation all as per clause 19.75 of SSR Part-I

MAMTA ENTERPRISES

VISHAL CONSTRUCTION