Replacement of Existing Fire Fighting System in Himachal Pradesh Vidhan Sabha Complex at Shimla

Amount

supply,Installation, Testing & Commission of Electrical Motor Driven Fire Pump set suitable for 45 KW/ 60 HP 2900 RPM, automatic operation consisting of following as required (A) Providing and fixing horizontal type. centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft , Mechanical seal and fathest outlet at specified flow of 2280 LPM and 70 Metres head conforming to IS 1520. (The pump should be capable of delivering 150% rated discharge at a head not less than 65% of the rated Head) (B) Providing and fixing suitable 60 HP SQ cage induction motor 60HP, TEFC, synchronous speed 2900 RPM, suitable for operation on 415 volts, 3 Phase 50 Hz. AC with IP 55 protection for enclosure, horizontal foot mounted type with Class- 'F' insulation. conforming to IS-325 (C) The pump should be installed on suitable CC foundation of 1:2:4 ratio ( 1 Cemnet: 2 coarse sand: 4 graded stone aggregate 40 mm nominal size) duly plastered and with anti vibration pads as per best satisfaction or Engg-in-Chage/directed at site CROPTON/KIRLOSKER Make 60 HPPUMP SET.

Supplying Installation , Testing of Jockey pump with 15 HP SQ cage induction motor, TEFC, synchronous speed 2900 RPM,suitable for operation of 415 volts, 3 phase 50 Hz AC with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 for 180 LPM and 70 Meters heas conforming to IS 1520. Bz impeller and Mechanical seal, M.S fabricated Common base plate. coupling, coupling guard complete with installation on CC foundation etc. as required and directed at site complete in all respect CROPTON/KIRLOSKER Make 15 HP Jockey Pump.

Supplying Installation , Testing and Commissioning of diesel engine driven main Fire pump 68 bhp suitable for automatic as well as manual operation and consisting of following: complete in all respect as required. ( A) Horizontal type, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft mechanical seal to a specified flow of 2280 LPM and 70 Meters head conforming to IS (B) Suitable HP 1500 RPM diesel engine conforming to BS : 649/IS:160/IS:10002 all amended upto date, continuous duty, multi cylinders vertical 4 stroke cycle water cooled, developing suitable BHPat operating speed specified to drive the fire pump capable of driving continuous non-stop operation for 8 Hours having 10% overload capacity for one hour in a period of 12 hours continuous run, capacity to accept full load within 12 seconds from the receipt so signal to start and complete with following accessories : (i) Dynamically balanced fly-wheel (ii) Direct coupling for pump and coupling guards. (iii) Radiator with house, fan water pump, drive arrangement and guard (iv) Air-Cleaner dry type (v) Fuel tank with necessary pipe. (iv Pump for lubricating oil and lubricating oil fitter. (vii) Electric starting system alongwith battery 12V / 24V (viii) Exhaust silencer (residential type) with necessary pipe work. (ix) Governor (x) Instrument panel housing all the gauges including tachometer, hour meter and starting switch with key ( for manual starting (xi) Necessary safety controls and stop solenoid in the event of fault (xii) Painted in post office red colour (C) The pump should be installed on Common bed plate fabricated out of MS channel of suitable size for assembling the Pump and the Engine, flexible coupling and with coupling guard for protection/safety d) Making cement concrete foundation of 1:2:4 ratio (1 Cement: 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) duly plastered suitable for Diesel engine pump set including vibration isolation by providing cushy foot mount pads as necessary, foundation bolts, brackets, clamps, fixtures, grouting etc. in accordance with manufacture's design etc. as per specification complete as reqd / directed at site Diesel engine Pump set 68 bhp, Crompton/ Kirlosker Make.

PIPING

Providing, fixing, testing and commissioning, of the following sizes of flange jointed / screwed / welded, MS pipes of Class C (heavy class) ISI marked and of approved make,, including accessories such as MS bracket, U clamps with Anchor fasteners,tees /reducers / bends etc., and laying on the surface including painting with two coats of anticorrosive primer and two coats of approved red enamel paint after laying and testing to 13.5 Kg/Sq.cm hydraulic pressure after installation etc. complete as required.Make :- Tata/Jindal

200 mm dia

150 mm dia

100 mm dia

80 mm dia

25mm dia

Providing & fixing cast iron double flanged CI butterfly valve of rating PN 1.6 , SS Disc ISI Marked of the following sizes complete with bolts, nuts, washers and neoprene gaskets etc. as required.Make :- Kirlosker/Leader/Sant.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

Providing, installation, testing and commissioning of C.I reflux valve of rating PN 16 with CI body staright type of following sizes complete with rubber gasket, GI bolts, nuts, washers etc. as required.Make :- Kirlosker/Leader/Sant.

150 mm dia

100 mm dia

80 mm dia

ACCESSORIES

Supplying and fixing ISI marked single headed internal hydrant valve with instantaneous SS coupling of 63 mm dia with cast iron wheel ,conforming to type "A" of IS:5290 with blank gun metal cap and steel chain etc complete as required. Make: LG/OMEX/SAFEX

Supplying and fixing 63 mm dia, 15 mtr. Long RRL hose pipe with 63 mm dia Male and Female SS couplings duly binded with G I wire, rivets etc. conforming to IS 636 (type-A) as required. OMEX/LG/SAFEX

Providing installing and commissioning of first aid hose reel with MS construction spray painted in post office red (swinging type hose reel drum) conforming to IS: 884 with up to date amendments complete withi) 30 Mtr Long 20 mm nominal internal dia as per IS 12585 water hose thermoplastic (Textile reinforced)Type II Gunmetal valve ii)20 mm dia Nozzle iii)Drum and bracket for fixing equipments on wall Connection from riser with pipe as reqd/ directed at site. Make:-LG/OMEX.

Supplying and fixing 63 mm dia SS branch pipe with 20 mm (nominal internal diameter) size SS nozzle conforming to IS 903, suitable for instantaneous connection to inter-connect hose pipe coupling as required

Providing, fixing, testing and commissioning gunmetal one set of 4 way fire brigade connection with 4 Nos 63 mm dia gunmetal male instaneous inlet couplings, complete with cap and chain as reqd , suitable for connecting to 150 mm dia pipe header conforming to IS 904 complete as required.

Provid"ing & fixing weather proof standard hose cabinet( 30"x24x10") outdoor type, made out of sheet having glazed door with 6 mm thick clear glass including necessary locking arrangement with allen key, powder coating with Post Office Red paint and for housing 2 Nos. RRL hose pipe, 1 No. branch pipe including grounting and suitable inscripting the words "Hose Cabinet" on the Box complete as required.

Fabricating, supplying,installation, testing and commissioning of electrical control panel of cubical construction,floor mounted type , fabricated from 2 mm thick CRCA sheet compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatrment process,cable alley,inter connection, having switchgears and accessories mounting and internal wiring, earth terminals numbering etc complete in all respect ,suitable for operation on 415 V ,3 phase,50 Hz AC supply with enclosure protection class IP 42 as reqd

PANEL IN FIRE PUMP HOUSE

INCOMER

OUTGOING.

a) Main fire pump.

iii) Pump on LED Indication lamp --- 1 No.

b) Jockey pump.

iii) Pump on LED Indication lamp --- 1 No.

c) Diesel Engine Control

d) SYSTEM CONTROLLER

Designing, Supply, Installation, Testing and Commissioning of System controller to control operation of Main Electric Fire Pump, Diesel Pump, Pressurisation Pump, in sequence as per specification consisting of relays, timers, sensors, annunciation window for fault indication, complete as per specification.

Supply and fixing dial type pressure gauge with stop valve complete as required

Providing fixing testing and commissioning of MS air vessel for pump house on fabricated form 6mm thick MS plate, 250mm in diameter and 1.2mtr in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stopi cock, flanged inlet connection and drain arrangment with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required complete in all respect..

Supply and fixing dial type pressure switch with control wiring & other aceessories of superior quality & make completein all respect.

Providing & fixing cast iron GATE VALVE of rating PN 1:6, SS Disc ISI Marked of the following sizes complete with bolts, nuts, washers and neoprene gaskets etc. as required MAKE: KIRLOSKER/LEADER/SANT

Providing installing testing and commissioning of Y-STAINER of rating PN 16 With CI Body staright type of following sizes complete with rubber gasket. GI Bolts, Nust, washers etc. as required Make: KIRLOSKER/LEADER

80 mm dia

150 mm dia

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Unarmoured cable 16 sq. mm (four core)

Unarmoured cable 70 sq. mm (3.5 core)

Unarmoured cable 120 sq. mm (3.5 core)

TARUN FIRE SYSTEM