REPAIR/REPLACEMENT OF INTERNAL ELECTRIFICATION AND CONNECTED WORKS IN OTM AND MD ACCN OF ZONE III UNDER AGE E/M-II OF GE (SOUTH) MEERUT

Amount

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators etc removing material from site complete all as specified and directed.

All as per item No 1.00 but except conduit.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in existing PVC / MS concealed conduit of any size/dia complete with all accessories / fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / Bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 above but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 3.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 3.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15/16 Amps socket outlet point on independent board.

Material & labour for point wiring with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One light point / bell point controlled by one, one way switch 05 / 06 Amps.

All as per item No 8.00 above but for One ceiling / Exhaust fan point controlled by one, one way switch 05 / 06 Amps.

All as per item No 8.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as per item No 8.00 above but for One 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as per item No 8.00 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed by Engr-in-Charge

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fixing bell push flush type , 5 amps , 240 volts complete all as specified and directed

Supply and fixing door bell ding dong type , 240 volts AC complete all as specified and directed.

Supply and fixing steped type electronic fan regulator flush type AC, 230 volts, complete all as specified & directed

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting all as specified and directed

Supply and fix decorative LED Tube light fitting 1x20 Watt , environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube rod 20W-01 No, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fixing LED tube light fitting 1x10 watt surface mounting , white powder coated CRCA sheet housing with opal diffuser and decorative end plates. complete with rod and all acessories as specified and directed.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed

Taking down carefully unserviceable submain wiring of any size and type removing material from site complete all as specified and directed .

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for phase and neutral + 01 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable, FRLS with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable, FRLS, drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dolly including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing complete all as specified & directed.( Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

All as item No 25.00 above but by using two single core cable of 10 Sqmm for Phase and neutral + 1 single core cable of 10 Sqmm for earth wire complete all as specified (Note- one meter of conduiite along with 2x10 Sqmm wire and one 10 Sqmm earth wire shall be meassured as one length.)

All as item No 25.00 above but by using two single core cable of 4 Sqmm for Phase and neutral + 1 single core cable of 4 Sqmm for earth wire complete all as specified and directed. (Note- one meter of conduiite along with 2x4 Sqmm wire and one 4 Sqmm earth wire shall be meassured as one length.)

Taking down carefully unserviceable distribution board of any capacity existing complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, SPN, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 12 way, with 200 Amps rated copper bus bar and IP - 43 protection and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 20 Amps to 32 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing sheet metal enclosure, Triple pole and neutral , 415 volts, AC, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection including provision for four pole isolator/MCB as incomer with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as specified and directed.

Supply & fixing isolator 4 pole 'B' series 100 amps capacity AC 415 V,10kA complete all as specified and directed

Supply and fixing vertical loadline sheet metal enclosure double door, triple pole and neutral (TP & N vertical loadline) AC, 415 volts, 04 way, with 200 Amps rated copper bus bar and IP - 43 & IK 09 protection, including 100 Amp MCCB-01 No as incommer and 6 Nos MCB's for out going circuits inside of DB, including chases and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified and directed .

Supply & fixing in repair industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 20 Amps MCB, single pole, AC, 240 volts and flush to wall including all cuttings & chases etc on wall and making good including two coats of white / colour washing / distempering etc to match the existing disturbed surfaces complete all as spcified and directed .

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.3 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. (Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department)

Taking down carefully under ground cable of any size and making good to disturbed surface as per existing complete all as specified and directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

All as per item No 39.00 above but 16 Sqmm 2 core.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 M depth in soft / loose soil and geting out complete all as specified and directed.

Material and labour for sand cushioning with dry fine sand including filling, spreading, levelling in layers in cable trench with approved quality of sand for protection of under ground cable complete all as specified and directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on flat complete all as specified and directed.

Supply / laying and fixing 50 mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

All as per item No 44.00 above but of size 40 mm in dia.

Returning, filling in, including spreading, leveling, watering and well ramming in layers n. exc. 25 cm thick in soft / loose soil complete all as specified and directed.

Removing surplus excavated materials n.exc. 50 Mtr and depositing where directed at a level n. exc. 1.5 Mtr above the starting point complete all as specified and directed.

Supply and fix in repair, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted in wall complete, including distempering to match with existing surface all as specified and directed .

Supply and fix decorative LED Tube light fitting 1x20 Watt , with opal diffuser, environmental friendly, energy efficient MS batten with retrofit T8 polycarbonate tube-01 No having single side connection complete with all accessories and fixing material all as specified and directed by Engr-in-Charge. Make:- Havells Model No- PHOTONULTRAE2.01213T8SSTL20WLED865SPC+ STREAKT8UPT01X22WSSBSWH OR equivalent in Crompton/ Wipro/C&S/Surya

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having both end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fixing in repair LED Tube rod 1x20 Watt , energy efficient suitable for MS batten with retrofit T8 polycarbonate tube, having one end connection, complete with all accessories and fixing material all as specified and directed by Engr-in-Charge.

Supply and fix in repair LED PL-L lamp , 4 pin , 18watt, suitable for inatallation in existing lamp holder complete all as specified and directed.

Supply and fix in repair LED lamp 9 watt complete all as specified and directed.

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

All as item No 54.00 above but for socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

All as item No 54.00 above but for switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

All as item No 54.00 above but for socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed.

All as item No 54.00 above but for switch bell push flush type , 5 amps , 240 volts complete all as specified and directed.

All as item No 54.00 above but for door bell ding dong type , 240 volts AC complete all as specified and directed.

All as item No 54.00 above but for steped type electronic fan regulator flush type AC, 230 volts complete all as specified and directed.

All as item No 54.00 above but for lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

Supply and fix in repair fan capacitor 2.5 MFD single phase 230 volt complete all as specified and directed.

Supply and installed LED security light fitting 1x45 Watt luminaries including taking down existing old security light fittings with pressure die cast aluminium housing comprising high power LEDs enclosed with lens embedded PC cover with LED driver complete IP 65 protection complete all as specified and directed.: Make:- Havells Model No- ENDURA CITYLITE PLATINUM PLUS or equivalent in Crompton /Bajaj/Surya.

All as per item No 63.00 above but capacity 25 watt.complete all as specified and directed.

Supply and fix in repair LED Driver suitable for 25 Watt LED security light as per existing make and model at site all as specified and directed.

Supply and fix in repair LED Driver suitable for 45 Watt LED security light as per existing make and model at site all as specified and directed.

Supply and fix in repair LED Driver suitable for 36/42 Watt LED panel light fitting as per existing make and model at site all as specified and directed.

Material and labour for fixing in repair pressed steel terminal box 100mm x100mm 60mm deep with 3mm thick laminated sheet on top for mounting switch and sockets/ regulator incl taking out old box & making good disturbed surface to match the existing complete all as specified and directed .

All as per item No 68.00 above but size 150 x100 mm. complete all as specified and directed.

All as per item No 68.00 here in before but size 200 x150 mm complete all as specified and directed.

Supplying and fixing in repair LED bulk head light fitting wall mounted with inbuilt edge lit LED 10 watt, complete with all acessories all as specified and directed Make- Havells, Model HEXA 10 W or equivalent in Wipro/ Crompton.

Supply and fix in repair modular switch single pole 230 volt one way 6 A complete all as specified .

Supply and fix in repair modular socket 5 pin single pole 230 volt 6 A complete all as specified and directed.

Supply and fix in repair modular switch single pole one way 16 A 230 volt complete all as specified and directed.

Supply and fix in repair modular socket 3 pin 5/6 A and 3 pin 15/16 A (2 -in-1 multipurpose) single pole 230 volt 6 A complete all as specified and directed.

Supply and fixing in repair recess mounting LED 2'X2' luminaire 36 W CRCA powder coating housing with anti-glare diffuser with super bright LEDs, with & including driver & including all acessories all as specified and directed Make- Havells Model Plano or equivalent in Crompton/Phillips.

Supply and fixing in repair LED POST TOP LANTERN 25 W including all accessories for fixing complete all as specified and directed by Engineer-in-Charge. Make -Havells , Model No- RUBYPT25WLED757PSYMTOPC or equivalent in /Bajaj/Philips/Compton

Supply and installed LED Flood light 60 watt energy saving, environment friendly, long life, die cast aluminium housing comprising high power LEDs as light source including all needed accessories to fix it on wall/Tree/pole.. : Make:- Havells Model No- JETA QUANTO PLUS, Cat Part No. JETAQUANTOPLUSFLP60WLED757SYMLENS or equivalent Crompton/ Phillips/SURYA/Bajaj

Supply and fix in replacement LED emergency bulb 9W, lumen output 6500K, with inbuilt rechargeable battery of capacity 2200mAH with base cap B22, coplete all as specified and directed. Product Code - NE9001, Make - Wipro or equivalent in Havells/Surya.

Supply and fix Decorative wall light fixture made up of Polycarbonate, suitable for 9/10 W LED lamp B22 base including 9/10 W LED lamp and including all accessories for fixing of fitting on wall all as specified and directed Make:- Havells, Model-Globe, ordering code LHFOFUE1TZ1W012 or equivalent in Crompton /Bajaj.

Supply only LED batten fitting suitable for T8 LED tube rod upto 22W for single LED tube, epoxy powder coated white after phosphochromate treatment for rust free long life, for fixing on wall/ceiling with help of screws at a distance of 600mm distance, including complete internal wiring suuitable for retrofit tube light with single side connection, Model - STREAK, SAP Code - STREAK8UPTO1X22WSSBSWH, Make : Havells or equivalent in C&S/SURYA/Bajaj.

Supply only LED batten fitting suitable for T8 LED tube rod upto 22W for single LED tube, epoxy powder coated white after phosphochromate treatment for rust free long life, for fixing on wall/ceiling with help of screws at a distance of 600mm distance, including complete internal wiring suuitable for retrofit tube light with double side connection, Model - STREAK, SAP Code - STREAK8UPTO1X22WDSBSWH, Make : Havells or equivalent in Wipro/Crompton.

Manish Enterprises