Renovation of Road of Mahmoodpur Mr in left bank from km 0.550 to 2.230 (Lot 07)

Amount

Cleaning Jungle including uprouting of trank vegetation, grass, buss, wood, tries & saplings of girth up to 30 cm measured at a height of 1 metres above ground level & removel of rubbish upto a distance of 50 metres out side the pariphery of area cleared

Providing, Laying, spreading and compacting stone aggregates of 53-22.4 mm size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, Stone screening to fill up the characteristics of coarse aggregate, watering and compacting to the required density

Providing and applying primer coat with bitumen cmulsion on prepared surface of granular Base including crearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.

Earth work in excavation including lead upto 30m & lift upto 1.5m, excluding mechanical compaction but including manual compaction and dressing to profile in road upto 1.5 m height. As per IDSOR-2021-22, Chap-v, item 5(a)

Eding with straigth over burnt bricks, laid dry length wise, including excavation, refilling, consolidation with a hand packing and spreading nearly, surplus earth within a lead of 50m

Providing and applying tack coat with bitumin VG-10 using Bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom

Providing, Laying and rolling of open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying with paver and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grade complete as per MoRTH Technical Specification Clause 510 including all cost of labour material and T&P etc. required for proper completion of work.

Providing and laying seal coat C Type sealing the voids in a bituminous surface laid to the specified leved, grade and cross fall

Providing and laying of hot applied thermoplastic compound 5mm thick including Reflectorising glass beads @500 gms/sqm area thickess of 5mm is exclusinve of surface applied glass beads as per IRC-35-2015 The finished surface to be level, uniform and free from streaks and holes

PRAVEEN KUMAR BAJPAI (BID ID -5579107)