Water tank near sulekha Sharma houseWater tank near sulekha Sharma house

Earth work in excavation by manual means over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth upto one metre from cutting edge, disposed earth to be levelled and neatly dressed in: All Kinds of soil.

Providing and laying dry stone aggregate 40 mm size

Providing and laying in position cement concrete of (1:3:6) grade excluding the cost of centering and shuttering

Providing and laying in position (1:1.5:3) grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement

(a) All work upto plinth level

(b) Above plinth level

Reinforcement for RCC work including cutting,straightening ,bending ,binding etc.

Brickwork with 2nd class bricks in 1:4 mortar(9")

Extra for brickwork above plinth level

Flooring 50mm thick in 1:2:4 mix

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry stone agg.

Centring & shuttering including strutting , propping & removal of formwork

Upto plinth level

Suspended floor

Edges of slab below 20cm

Plastering with 15mm thick plaster in 1:4 mix

Plastering with 12mm thick plaster in 1:6 mix

Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm)

P/f of bib cocks 15mm nominal bore of approved quality

Square shape 450x450 mm precast R.C.C. manhole cover with each frame - L.D. - 25

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. Internal work-exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing. 40mm nominal outer dia pipes.

Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.Using M.S. angles 40x40x6mm for diagonal

carriage of Sand 65km MT and 50 m HL

carriage of Bjari 65km MT and 50 m HL

carriage of Stone agg. 500 m HL

carriage of Brick 100km MT and 50 mHL

Add cost for Sign Board