32/CEE/BSNL/BGL/2024-2025

Amount

Supplying & Fixing of 450 mm sweep, 1400 rpm heavy duty exhaust fan with metal body, suitable for operation on 230Volts, 50Hz, AC supply in the existing opening including making necessary interconnections, testing and commissioning etc., complete as reqd (Make: M/s Havells /Crompton /Orient/ Usha/ GE Khaitan/ Almonard or SS make). (G/F Floor Switch Room-2, F/F Switch Room-2 and Power Room-2)

Supplying & Fixing of 450 mm sweep heavy duty pedestal air circulator suitable for operation on 230Volts, 50Hz, AC supply testing and commissioning etc., complete as reqd (Make: M/s Havells /Crompton /Orient/ Usha/ GE Khaitan/ Almonard or SS make).

S&F of Aluminium gravity air intake louvers suitable for 450 mm sweep heavy duty exhaust fan including around frame work for preventing rain water etc., as reqd.

Providing and making hole in existing wall to accommodate 18" Exhaust Fan, making good the same after installation of Fan, cement plastering the opening, removing debris from site, arranging necessary, scaffolding /safety Ladder etc as reqd (First Floor).

Supply & Fixing of Analog / Digital Time Switch Suitable for operation on 230V, 1 Ph, 50Hz AC Supply, with NO & NC contacts for the operation of Exhaust fan and 1 No SP MCB, 1No Tin Bar Suitable Syntex Box ( Front Visible Glass) i/c interconnection, testing etc as reqd. (GIC Make or similar superior make)

Supply & Fixing of 12SWG 3/8 inch or 1/4 inch MS/GI Mesh protection of existing window i/c necessary hardware, painting etc., as required

Providing and fixing MS Flat 25 mm X 3mm MS Flat on surface for beading to wire mesh wherever required to close the opening including making holes, rigidly fixing with fasteners etc., as required.

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. , a) 3 X 2.5 Sqmm

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required., a) 20 mm PVC conduit

Cutting the existing cement concrete digging by using compressor hammer drill / manual digging, cleaning the debris etc., and refilling of the same in the proportion of 1:2:4 RCC concrete (Approx size 0.20Mtr x 0.25Mtr) neat finishing, making good the damages etc., complete as reqd

S&F of 30Watt LED type Street light fitting suitable for operation on 230V, 50Hz, AC supply on surface of wall / on the existing GI pipe bracket / pole i/c making necessary interconnections, testing / commissioning etc complete as reqd. [Make: M/s Havells, Model LHEXAYP7PN6K030 / SS BSNL approved make]

Supplying and fixing of 32 mm dia 5ft B class GI pipe bracket suitable for fixing the existing LED street light fitting on surface of wall / existing pole with necessary clamps, accessories etc., complete as reqd.

Supplying and fixing Weather proof SMC box of size 150mm x 150mm x 100 mm with No. 1 No. 16A porcellain fuse cut out & 16A, 4 way connector block suitable size clamps to mount on the wall / existing compound light poles i/c necessary inter connections, testing, commissioning etc., complete as reqd. [Make: M/s Syntex, or superior make]

Supplying and fixing of 20W LED Gate light fitting with 20W LED Bulb suitable for operation on 230V, 50Hz, AC supply on surface of wall / in the existing GI pipe bracket / pole i/c making necessary inter connections, testing, commissioning etc., complete as reqd. [Make: M/s Havells LHDC11126099 or superior make]

Supplying and fixing of 3Nos RYB LED Indicators in the existing MV panel suitable for operation on 230V, 50Hz, AC supply i/c dismantling the faulty ones, making necessary inter connections, testing, commissioning etc., complete as reqd. [Make : M/s L&T / SS / BSNL approved make]

Removing of unusable power circuit points, air condition points re-arranging of power plug and AC points, phase distribution, checking of circuit and point wiring for Load reduction implementation etc complete as reqd ( Chandra Layout and Anjananagar ( Chandra Layout and Anjananagar CD reduction applying and implementation, Liasoning with Bescom)

Replacing of 4No suitable size CTs in meter board including removing of old CTs arranging for testing and commissioning etc complete as reqd ( Chandra Layout and Anjananagar )

Replacing of energy meter of suitable capacity CT based or non CT based as per requirement working on 440V AC supply arranging for MRT testing and commissioning etc complete as reqd ( Chandra Layout and Anjananagar )

Rewiring of meter board with suitable size copper wire/cable wherever required including removing of old unusable wiring, replacing of lugs, testing and commissioning etc complete as reqd ( Chandra Layout and Anjananagar )

Supplying and Laying of the 2core 4Sqmm "ISI" marked PVC insulated Aluminium conductor UG Cable of 1.1 KV grade on surface of wall / pole / in ground i/c necessary testing & commissioning etc., complete as reqd., [M/s Polycab / SS / BSNL approved make)

Supplying and making end termination with brass compression gland suitable for 2C X 4 Sqmm PVC sheathed / XLPE al. UG Cable of 1.1 KV grade and al. lugs etc., complete as required.

Supplying and laying 32mm dia. HDPE pipe for on surface of wall with clamps and painting the same etc., as required. (Make: M/s Ashirwad / Supreme or Any ISI marked)

Fixing of existing 4ft 20 W LED Fitting directly on ceiling/wall, including Dismantling of old faulty tube light fitting etc as reqd.

Lifting the existing 7.5 HP submersible pump set from the depth up to 180 Metre along with 40mm GI pipe riser and flat copper flexible cable using the motorized lifting vehicle including arranging necessary specialized T&P and manpower for lifting etc as reqd.

Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal/ coke and salt for meter borad body/DC earthing etc. as required

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm G.I strip on surface or in recess for connections etc., as required.

AGNES ELECTRICALS