MLA CDs 2024 2025 Kalavai Town Panchayat

Amount

Earthwork excavating and depositing on bank with in initial lead & lift for all loose soil, sub soil, black cotton soil, murram gravelly soil, hard re earth, shales, except hadr rock requiring blasting, etc., Complete as per SS 20 B. for foundation.

Cement Concrete 1:4:8 ( One Cement Four sand and Eigte aggregate ) using 40 mm ISS HBG metal, including cost and conveyance of materials to site, labour charges for mixing, laying, finishing, compacting, curing etc.complete.

Supplying and erecting centering to sides and soffits including supports and strutting with necessary cross bracing for plain surface such as RCC slabs rectangular beams all beams lintels etc., centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Reinforcement Cement Concrete 1:1/2:3 (One cement, One & Half sand, Three aggregate ) using 20 mm guage machine broken hard broken granite stone jelly for all RCC including cost conveyance and all labour charges etc. complete.

Collection supply of Well Gravel from approved quarry and filling the same in layer by layer, each layer not execeeding 15cm thick, including cost and conveyance of sand to site and labour charges for for filling, watering, tamping etc. complete

Brickwork in cement mortar 1:5 ( one cement and five sand ), mix using well burned new country bricks, including cost and conveyance of all materials to site, labour charges for mixing, laying, finishing, symaltaneously pointing with same morter, watering etc.complete.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and Three Sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers

Plastering in Cement Mortor 1:5 Mix (one cement, five sand) 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications

Supplying and fixing in Position of Indian Oriya pan type water closet with “P’’ or “S’’ trap to set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

Dadooing the wall glazed tiles of size 305mm x 200mm x 6mm size of approved make and quality and colour 1set in cement mortor 1:2 (one cement and two sand) over 10mm base layer plastering and pointing with white cement neatly as directed.

Supplying and fixing over the floors best quality of scratch ceramic tiles of 30 c.m x 30c.m x 6mm size of approved colour laying with cement mortor 1:3 mix pointing the joints with colour pigments etc. Complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100Vgrade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mm x75mm MS switch box inflush with wall with 3mm thick hylum sheet cover for 5A 3pin non interlocking flush type CSplug with painting of suitable colour with continuous earthwire connection of 14SWG TC wire for open plug point

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy cauge MS conduit pipe concealed in wall and ceiling with MS accessories inflush with wall withsuitable MS box to the house control switch and regulator with 3rnm thick hylum sheet cover for MS switch boxwith continuous earth wire connection of 14 SWG TC wire and rnaking good of the concealed portion with suitablecolour for concealed fan point (for rheostatic type fan regulator)

Wiring with 2 x 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with switch box with 5A FT switch inflush with wall and covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for light point / fan point (for electronic regulator)

Supply and fixing of 4'40W twin box type fluorescent fitting complete with copper choke and condensor with TWround block on wall or ceiling with tubes and PVC unsheathed copper leads from terminal to the fitting withfluoresent tubes

Supply and fixing of aspertan cement door with Necessay Accessories and Locking Arrangements including cost and conveying of all materials amd labour charge etc..,complete as per standard specification

Supply and Delivery Fabrication of MS doors and windows with outer frame and shutter frame in MS angle of size 40mm x 40mm x 6 mm with MS flat 25mm x 25mm x 6mm and MS sheet of 18 gauge including ventilating arrangements using 20mm square MS rods with locking arrangements including two coats of approved enamel paint over coat of red oxide including cost of angles, plates, sheets, fabrication charges, cost of hold fast and transportation charges etc., complete.

Supplying and fixing of push and pull type Rolling shutter confirming to IS 6248/1979 and as amended from time to time. With ISI make of approved size and section using 18 gauge G.I.sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of Hood covers , transportation charges etc., and as directed by Engineer incharge.

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Exterior Emulsion paint Two coats with good quality of approved Emulsion paint including cost of all materials to site and all labour charges for mixing applying and proper curring etc., Complete as per Standard Specifications for 10 sqm

Painting Two Coats on new Iron works with best synthetic enamel paint of approved colour and quality – 10m2.

Supply and delivery and fixing of 1000L HDPE tank as per IS 12701 / 1996 including loading, unloading, transportaion and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc.,