Construction Of Grampanchayat Karayalay At Pur Tal Junnar Dist Pune

ITEM NO: 1 Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means (SSR Item No: 21.02) (PWD-CIVIL SSR) Item Spec: (Bd.A.1 Page One Number 259)

ITEM NO: 2 Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling. ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) By Mechanical Means (SSR Item No: 21.06) (PWD-CIVIL SSR) Item Spec: (Bd.A.2 Page One Number 259)

ITEM NO: 3 Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and levelling the bed, removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth/ murum watering, ramming etc. complete. (Lift upto 1.5 m). By Mechanical Means (SSR Item No: 21.20) (PWD-CIVIL SSR) Item Spec: (Bd.A.6 Page One Number 260)

ITEM NO: 4 Providing dry/ trap/ granite/quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. (SSR Item No: 21.38) (PWD-CIVIL SSR) Item Spec: (Bd.A. 12 Page One Number 264) RA No.: 2

ITEM NO: 5 Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) SSR Item No: 24.01) (PWD-CIVIL SSR) Item Spec: (Bd. E. 1 Page One Number 287) RA No.: 4

ITEM NO: 6 Providing and laying in situ /Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, Steel centering formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 25.11) (PWD-CIVIL SSR) Item Spec: (Bd.F.3 Page One Number 298 and B.7. Page One Number38)

ITEM NO: 7 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) SSR Item No: 25.31) (PWD-CIVIL SSR) Item Spec: (Bd.F.5 Page One Number 300 and B.7, Page. One Number 38)

ITEM NO: 8 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite/quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/pumping. compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 25.50) (PWD-CIVIL SSR) Item Spec: (Bd.F.6 Page One Number 300 and B.7, Page One Number38) RA No.: 14

ITEM NO: 9 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/quartzite/granite /gneiss metal for R.C.C. Waist slab, and steps of staircases as per detailed design and drawings or as directed including steel centering, formwork, steel props, laying/pumping, compaction, finishing uneven and honeycombed surface with C.M. 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening the surface if special finish is to be provided and curing etc. complete. (Excluding einforcement, including cover block). (Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 26.25) (PWD-CIVIL SSR) Item Spec: (Bd. F. 13 Page One Number 305 /1.5. 456 (2000)

ITEM NO: 10 Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special nnish is to be provided and curing etc. complete, (Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Non SCADA Item) (SSR Item No: 25.70) (PWD-CIVIL SSR) Item Spec: (Bd.F.8 Page One Number 302 and B.7, Page One Number38) RA No.: 15

ITEM NO: 11 Providing and laying Cast in situ/Ready Mixcement concrete M-20 of trap/ granite/ quartzite/ gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) (Concrete Non Scada) (SSR Item No: 26.05) (PWD-CIVIL SSR) Item Spec: (Bd.F.9 Page One Number 303 and B.7, Page One Number38) RA No.: 16

ITEM NO: 12 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including balling out water manually, striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete (SSR Item No: 27.01) (PWD-CIVIL SSR) Item Spec: (Bd.G. 1 Page One Number 313)

ITEM NO: 13 Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in superstructure including striking joints, raking out joints, watering and scaffolding etc. Complete (SSR Item No: 27.05) (PWD-CIVIL SSR) Item Spec: (Bd.G.5 Page One Number 315)

ITEM NO: 14 Providing and fabricating structural steel work in rolled sections, fixed with connecting plates or angle cleats in main and cross beams, hip and jack rafters, purlins connecting to truss members and the like, as per detailed designs and drawing or as directed including cutting, fabricating, hoisting, erecting, fixing in position, making riveted/ bolted/ welded connections and one coat of anticorrosive paint and over it two coats of oil painting of approved quality and shade etc. complete. (SSR Item No: 23.02) (PWD-CIVIL SSR) Item Spec: (Bd.C.3 Page One Number 275)

ITEM NO: 15 Providing and fixing colour coated Zincalume (R) AZ150 (min 150 gms/sq.mt. total on each side) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT) (0.5 mm TCT), Hi-strength steel with min.550 MPa yield strength, metallic hot dip coated with Aluminium-Zinc alloy (55% aluminium 43.4% zinc 1.6% silicon) with COLORBOND (R) steel quality super durable polyester paint coat (with inorganic pigment). The paint shall have a total coating thickness of nominal 35 um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950-1050 mm effective cover width and nominal 25-30 mm deep ribs with subtle square fluting in the five pan at nominal 180-250 mm center-to-center. The end rib shall be designed for anti-capillary groove. and return leg. The feed material should have coil manufacturers product details marked a regular interval. Including fasteners with min. fastened with min. 25 um Zinc-Tin alloy coated, Hex head, self-drilling screw etc. complete. (weight of profile 4.52 Kilogram/One Square Metre)

ITEM NO: 16 Providing and fixing mild steel grill work for windows, ventilators, etc. 15 Kilogram/ One Square Metre as per drawing including fixtures necessary welding and painting with one coat of anticorrosive paint and two coats of oil painting complete. (SSR Item No: 40.02) (PWD-CIVIL SSR) Item Spec: (Bd.U.1 Page One Number 537)

ITEM NO: 17 Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete. (SSR Item No: 21.36) (PWD-CIVIL SSR) Item Spec: (Bd.A.10 Page One Number 262)

ITEM NO: 18 Filling in plinth and floors with contractors material/brought from outside and approved by Engineer incharge in layers of 15 cm to 20 cm including watering and compaction etc. complete. (SSR Item No: 21.37) (PWD-CIVIL SSR) Item Spec: (Bd.A.11 Page One Number 263)

ITEM NO: 19 Providing and fixing frame with/without ventilator of size as specified with Country non teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete, (55R Item No: 39.02) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO: 20 Providing and fixing green marble of 18 to 20 mm thick for door frame/ dado/ window boxing etc. On C.M. 1:6 including filling joints with polymer base filler nosing/ moulding the sharp edges wherever necessary, curing, etc. complete. (SSR Item No: 33.48) (PWD-CIVIL SSR) Item Spec: (Bd. M. 12)

ITEM NO: 21 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.01) (PWD-CIVIL SSR) Item Spec: (Bd.L.1 Page One Number 367)

ITEM NO: 22 Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.03) (PWD-CIVIL SSR) Item Spec: (Bd. L.2 Page One Number 368)

ITEM NO: 23 Providing neeru finish to plastered surfaces in all positions including scaffolding and curing etc. complete. (SSR Item No: 32.15) (PWD-CIVIL SSR) Item Spec: (Bd. L.10. Page One Number370)

ITEM NO: 24 Providing and laying vitrified mirror/glossy finish tiles decorative type having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to IS. 15622-2006 (group Bla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete. (SSR Item No: 33.40) (PWD-CIVIL SSR) Item Spec: (Bd.M. 12 Page One Number385) RA No.: 8

ITEM NO: 25 Providing and laying Antiskid Ceramic tiles of approved quality of size 30 cm x 30 cm and confirming to IS 15622-2006 (Group-B IIA) for antiskid flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with cement slurry cleaning curing etc. complete. (SSR Item No: 33.67) (PWD-CIVIL SSR) Item Spec: (Bd. M-12 page One Number 385)

ITEM NO: 26 Providing and laying vitrified mirror / glossy finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to 10 mm thickness and confirming to 15. 15622-2006 (group Bla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and clearing etc. complete (SSR Item No: 33.41) (PWD-CIVIL SSR) Item Spec: (Bd.M. 12 Page One Number385)

ITEM NO: 27 Providing rough cast cement plaster externally in two coats to concrete, brick or stone masonry surfaces in all positions with base coat of 12 to 15 mm thick in C.M. 1:4 and rough cast treatment 12mm thick in proportion 1:1 1/2:3 including scaffolding and fourteen days curing complete (SSR Item No: 32.12) (PWD-CIVIL SSR) Item Spec: (Bd.L.8 Page One Number 370)

ITEM NO: 28 Providing and fixing solid core flush door shutter in double leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixtures and fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc, complete. (SSR Item No: 39.95) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge. )

ITEM NO: 29 Providing and fixing fiber glass reinforced polyster door shutter 30 mm thick as per IS 14856 (2000) (Reaffirmed 2006) without ventilator including chromium plated fixtures and fastening with chromium plated handles on both sides, etc complete (SSR Item No: 39.58) (PWD-CIVIL SSR) Item Spec: (As directed by Engineer in charge.)

ITEM NO: 30 Providing and fixing in position TMTFE500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc, as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars. binding with wires or tack welding and supporting as required complete. (SSR Item No: 26.33) (PWD-CIVIL SSR) Item Spec: (Bd.F.17, Page One Number 306 )

ITEM NO: 32 BRICKS. 1) Water Absorption (Set of 5 Bricks), Compressive Strength(Set of 5 Bricks). Efflorescence (Set of 5 Bricks) (SSR Item No: 99.13) (PWD-CIVIL SSR) Item Spec: ()

ITEM NO: 33 CONCRETE. 1) Compressive Strength OF C.C. Cube (Set of 3 cubes). (SSR Item No: 99.19) (PWD-CIVIL SSR) Item Spec: ()

ITEM NO: 34 MORTOR. 1)Compressive Strength. (Set of 3 Cubes) (SSR Item No. 99.27) (PWD-CIVIL SSR) Item Spec: ()

ITEM NO: 35 STEEL BAR TESTING.1)Upto 16 mm (Set of 3 Bars) (SSR Item No: 99.72) (PWD-CIVIL SSR) Item Spec: ()

ITEM NO: 36 Royalty For Natural Sand Screened (for plaster work only)

ITEM NO: 37 Royalty For Rubble stone excluding royalty

ITEM NO: 38 Royalty For Soft Murum

Please Enable Macros to View BoQ information