RENOVATION AND MODIFICATION WORK OF GPTC AT GAIL INFOHUB BUILDING, SECTOR -1, NOIDA

Total Amount of BoQ2 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ3 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ4 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ5 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ6 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ7 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ8 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ9 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ10 with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ11with GST Please enter GST in % in N column on total Amount

Total Amount of BoQ12 with GST Please enter GST in % in N column on total Amount

BoQ_Ver3.0

Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Cover Plate : 150 x 150mm

Supplying and installing following size of perforated pre-painted M.S cable trays with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.

Supplying and installing following size of perforated pre-painted M.S cable trays reducers with perforation not more than 17.5%, inconvenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts&nuts, painting suspenders etc as required.

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :

1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

Structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 10 average compressive strength in super structure above plinth level up to floor V level in :

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

Cement mortar 1:4 (1 cement : 4 coarse sand)

Extra for providing and placing in position 2 Nos 6mm dia. M.S. bars at every third course of half brick masonry.

Extra for providing opening of required size & shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/Stone work including necessary holes for pillar taps etc. including rubbing and polishing of cut edge etc. complete.

Providing and fixing machine cut, mirror/ eggshell polished , Marble stone work for wall lining (veneer work) including dado, skirting, risers of steps etc., in required design and pattern wherever required, stones of different finished surface texture, on 12 mm (average) thick cement mortar 1:3 (1 cement : 3 coarse sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge.

18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.

(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with

Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.

The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approvedshop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.

WOOD & PVC WORK

Second class teak wood

35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured).

Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size).

Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete.

Providing and fixing aluminium handles of approved make anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessry screws etc. complete.

Single rubber stopper

1.0 mm thick

Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium density grade I, ISI marked and conforming to IS : 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete.

Providing and fixing approved brand and manufacture of Terza Design Mortice Lever handle On Plate (TER10SC) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture of Mortice Sash lock (ML100SS) with 85 mm CD & 50 mm Backset along with key cylinder fixing Option along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-incharge.

Providing and fixing approved brand and manufacture of Euro Profile Cylinder one side key & other side knob 60 mm ( CL201SS) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture of Terza Design Mortice Lever handle On Plate (TER10SC) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.

Providing and fixing approved brand and manufacture of Terza Design Mortice Lever handle On Plate (TER10SC) along with necessary accessories and screws etc. complete in all respects as per manufacture ofrs' specificatios & as directed by Engineer-in-charge.

75 mm overall thickness partition with 12.5 mm thick double skin of Gypsum board as pe IS specifucation

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily

Size of Tile 600 x 600 mm

Size of Tile 600 x 1200 mm

Glazed Vitrified tiles Matt/Antiskid finish of size

18 mm thick Italian Marble stone slab, Perlato, Rosso verona, Fire Red or Dark Emperadore etc.

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25 mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I. pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level. The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the machine screw with rawl plug.

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of 800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of 64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7mm fused spot welded together (minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

VENEER PANELING

Supply and installation of approved shade Veener paneling over 8mm thk Marine -710 Ply Board as backing to achieve required partition thickness & support as per the manufacturer specifications & details complete.

Providing& fixing in position wall panelling at all heights of thickness 25 mm with Credence Fiber Glass Acoustical Wall Panels of size 600X600 /600x1200 mm creda, resin bonded square edges having NRC of 0.9 minimum. The panels should be manufactured from high density bio-soluble resin bonded glass wool absorber having density of 96 Kgs/m3 and wrapped on the front side with an acoustically transparent fabric having option of colours and fabric options like jute etc. as per approved by architect/engineer-in-charge, plain tissue backer and fabric wrapped hardened edges. Panels should have humidity resistance up to 90 %, thermal conductivity ≤ 0.03 (m² k / w) thermal resistance ≥ 0.9 (m² k / w) & moisture rate ≤ 1% (JC/T670 – 2005). The panel should be fully recycled and fire retardant as per Class A. The installation comprises surface im

palers having projecting elements called spikes shall be fixed on the plain surface at 1200 mm center to center horizontally and 600 mm center to center vertically or as per approved by engineer-in-charge, using self-tapping screws. Silica based construction adhesive to be dabbed on to the projecting elements (spikes) of the impalers. Wall Panels shall be pierced through the spikes of the impalers ensuring line & level of panel are maintained. The panels should be mounted on the impalers horizontally or vertically as per the approved design or as per the directions of the engineer-in-charge.

LACQUERED GLASS PANELING

Providing and fixing 6mm thick Lacquered Glass of approved make shall be fixed with Wooden panel fixed to wall with required fasteners anchor bolt ,Bolt nuts etc as per detailed drawing / instruction of architect complete.

WALLPAPER

DIGITAL 2D/3D WALL PAPER : Providing & fixing 2d/3d digital printing printing on approved paper/canvas/fabric media as per suggested graphic work on suggested surface .Contractor shall provide graphic work detail & 5 sqmm sample for approval the work shall be done inclusive of all rate with accesesories,tool tackel at allheight compelte.

CARPET FLOORING

Carpet Flooring Work: Providing & Fixing of floor covering rolls as per approved sample by architect, having a density of 70 million fibres of nylon 6.6 per M2, Friction Slip Resistance Test EN 14041 Class DS, sanitized anti-microbial treatment with resilient waterproof backing ,anti allergic cetrtified by British allergy foundation, anti static, thickness 4.3 mm and approximate weight of 1.8 k.g./sqm of roll form. The reaction to fire should be as per EN 13501-1: Bfl-s1. shade as approved by client and installed by approved applicator of manufacturer. Flocked flooring should be installed over cement based compound available within India. Carpet fixed with SR-998 Pidilite or equivalent carpet adhesive.Carpet should be laid as closure to each other.Contractor will take care for level matching with other area flooring. Scope includes labour, under lay material, disposal of debris, necessary cutting of carpet without damaging the edges,etc. All works are carried as per detail drawing / instruction of architect / EIC. before laying carpet contractor shall prepare sub floor.

FALSE CEILING

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval,

including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square

12.5 mm thick tapered edge gypsum moisture resistant board.

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineerin-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8mm drop; made of G I sheet having galvanizing of 100gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending

GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Providing and fixing of Cirrus Baffle false ceiling system comprises 75 mm x 150 mm (75 mm width and 150 mm Height) U Shape panels. Panels shall be made of 0.7 mm thick Aluminium sheet with wooden finish powder coating on the front side with 60 microns powder coating. Length of the panel will be up to 3000

mm. Panel shall be high corrosion resistance and good color stability. Panel to panel gap will be 150 mm. Panels are fixed on to roll formed carriers 50 mm wide x 20 mm deep out of 0.75 mm G.I sheet powder coated with cutouts to hold the panels in module of 150 mm at maximum 1200 mm c/c. Carriers are suspended from the roof or truss by 6 mm dia. galvanized thread rod hanger with height adjustment at max. 1200 mm c/c. Hangers are fixed to the roof by ‘J’ hooks or ceiling brackets and Fasteners. Panels are factory cut in lengths up to maximum 3000 mm to suit site dimensions or shop drawings. Top cap and side cap are used to cover the edges of the panels. Inner cap and outer cap are used to nut bolt the panel with carrier. These Baffles are light weight and do not add any extra load on ceiling.

Providing and fixing in true horizontal level Cellio Open cell Aluminum lay-in ceiling tiles with border panels forming flush-tegular edge of size 600mmx600mmx38mm having Fire Performance CLASS 0/Class 1 (BS 476). The tile of ‘Global white’ color with cell size 100mm X 100mm shall be laid on white painted Armstrong Suprafine XL15mm profile grid system comprising Main runners (3000mm), 1200mm and 600mm cross tees with 15mm white flanges and 38mm web height.The grid should be with 15mm wide T - section flanges color white having rotary stitching on all T sections i.e. the Main Runner with C3 coupling, 1200 mm & 600 mm Cross Tees with Hardened XL2 Clip having a web height of 38 mm and a load carrying capacity of 14 Kgs/M. The T Sections have a Galvanizing of 90 grams per M2 with pull out strength of 100 Kgs. Suspension system for grid to comprise main runner spaced at 1200mm centers securely fixed to the structural soffit by approved hangers at 1200mm maximum centre & not more than 150mm from spliced joints. The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall. 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles, secured to walls at 450 mm maximum centers. Suspension accessories consisting of M6 Anchor Fasteners with Vertical Hangers made of Galvanized steel of size 26 x 26 x 25 x 1.2mm with a Galvanized Thickness of 80gsm, A pre Straightened Hanger wire of dia – 2.65 mm of 1.8 m length., thickness of 80gsm and a tensile strength of 344-413 MPa, along with Adjustable hook clips of 0.8mm thick, galvanized spring steel for 2.68 mm. The adjustable clip also consists of a 3.5 mm aquiline wire to be used with the main runner. Make : HunterDouglas, Armstrong, Dexune

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge.

Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately.

Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for:

(i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3

(ii) Sites with structure height more than 20m for all wind speeds.

Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.

Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m).

Using R4 series with frame (115mm & above) x (45mm & above) & both glazed and fly screen sash (44mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height above 1.8m)

Fixed window / ventilat

or without mullion / transom

Using R1 series with frame (33mm & above ) x (35mm & above). (Height upto 0.90 meter)

Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15 x 3 mm and nuts & bolts complete.

Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides.

Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete.

Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

ACOUSTICAL SOUNDSCAPE PANEL

Providing and Fixing SoundScapes - Acoustical clouds which are 30 mm thick, flat glass fiber panels with Humidity Resistance RH 90% & Recycled Content of minimum 30%, come in various shape options like Square / Convex / Concave / Circle / Hexagon / Trapezoid / Parallelogram (Left & Right) / Rectangle (Small & Large) and in standard Traffic White color with LR 90% or in the color specified by the Architect / Engineer in charge (Ivory / Pale Green / Pastel Blue / Traffic Grey / Pale Brown). or in the color specified by the Architect / Engineer in charge . The size and sound absorption details are as :2.12 metric sabin.Shape- Circle ,Nominal Size- circular- of different diameters as below. The back of each panel to have embedded square frame bracket system of 610x610mm in which provisions are already made for integration of installation system for suspension of individual or grouped panels.The panels to be suspended individually using the SoundScapes Deck hanging kit. Each kit to consist of gripper structure anchors with an outer diameter of 16mm and height 23mm, aircraft cables of 1.5mm dia 2.44 LM in length and bottom end cable adjusters of 8.9mm outer diameter. Each panel to be suspended using the aircraft cables which are suspended from the soffit using the gripper structure anchors and its other end passing through the bottom end cable adjuster which are screwed in the 4 corners of the frame bracket system.The height & level of the panels can be adjusted using the bottom end cable adjusters. Make : HunterDouglas, Amstrong, Dexune

1200mm Dia.

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc.

After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge.

900 mm Dia

600 mm Dia

FINISHING WORK

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.

With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

Two coats.

Finishing walls with textured exterior paint of required shade :

New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @2.20kg/10 sqm.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

ALUMINIUM & GLASS WORK

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed echanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. Glazing and paneling to be paid for separately) :

For fixed portion.

Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineerin-charge.

Pre-laminated particle board with decorative lamination on both sides

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing Stainless steel 304 Grade H- type pull handle of size min 32 mm dia and 1200mm long of approved make including SS screws, including making holes of required size in shutter etc. complete as per direction of Engineer-in-Charge.

Providing and fixing SS Bottom patch Lock with cylinder of approved make including necessary screws etc. all complete.

Providing and fixing SS floor mounted half dome door stopper of dia 45mm including necessary screws etc. all complete.

Aluminium Louver

Providing and fixing Horizontal / Vertical Power Coated Aluminium Louvers as per the drawings enclosed as per approved shade, fabricated out of heavy duty aluminum extruded profiles ( Powder coated / anodised ) fixed with Aluminium tube outer frame. All aluminum members & profiles shall be of AC 25 grade as per specification. The Aluminum members shall be protected with Masking Tapes all around the profiles for safety against external scratches at site (Masking Tapes shall be removed only at the time of handing over as per the instructions of Developer). The fabrication shall be done with all the joints mitered; the Outer Frames and Mullions jointed with appropriate Stainless Steel Screws, Heavy Duty Aluminum Angle, Cleat, box sleeve etc. EPDM gaskets to be used for preventing Bimettalic corosion wherever required. The fixing shall be done on to Aluminium frames or existing openings at anchorage locations, in windows , walls , Glazing jambs, cills and heads etc by drilling holes with an electric drill, inserting fasteners, stainless steel counter sunk screws etc.

MISCELLANEOUS WORKS

Providing & fixing of Blackout Roller Blinds fabric made up of 100% Polyester with Acrylic coated of 0.32mm(PVC free) of thickness 0.50mm ±5% and weighi

Room Signages (Stainless Steel with single color/Multi color engravings)

MD Cabin/ HR & Admin/ Conference room/Meeting Room/Cabin/Stationary/ Store room/Server / ups /electrical room/G.Toilet & Ladies Toilet with symbol/Pantry/Fire exist/rest room or for anyother area as per the direction of EIC. The SS plate of approximate size 200mmx400mm shall be 304 grade of approved shape as per drawing. single color/Multi color engraved signage Font and letter sizing shall be got aproved by the architect-sample shall be submitted. Rate shall include all hardware and necessary arrangement for fixing.

GAIL LOGO (MAIN GATE AND BUILDING )

Supply Installation Testing & Commissioning of GAIL Title with Logo made in Acrylic Sheet. Led Light to be inserted inside acrylic letters and affixed on wall, Gail (India) LTD. Word - Letter - 24" height

Providing & Laying In position Corian Top on Counters at places as per drawings and as per the directives of the EIC. The color pattern and design of the sheet shall be approved by the Architect/EIC of thickness 10-12 mm as per standards

WPC Jali

Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium corbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section including applying a priming coat of approved steel primer, placed at grid made at 1.0 x 1.0 m or as per requirement at site with necessary stainless steel fasteners and SS screw etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

STEEL WORK

Supplying, Installation, Testing and Commissioning of uPVC, P or S trap of self cleansing design with / without vent. arm Setting in cement concrete 1:2:4 mix complete including cost of cutting & making good the Wall / Floors wherever required.

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required

In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.

In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame , concrete/ masonry, etc. as per direction of Engineer-in-charge.

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Designing and

providing and fixing murals on walls in stainless steel mirror sheet 3mm thick grade 316, laser cut in required design with appropraite backing (marineply/ metal sheet PU painted) as feature wall as required with backlit LED light. The same to be fixed on wall with help of proper fixing arrangement to be got appoved by EIC.

Designing and providing and fixing murals on walls in 12mm MDF Duly duco polished in different shapes and sizes and fixed on any surface like wall/RCC/Parition with proper fixing arrangement as features/design elements as required with backlit LED light.

Providing and fixing Logo on walls in Stainless Steel Mirror sheet 3mm thick, grade 316, laser cut in required design with appropriate backing (marine ply/ metal sheet PU painted) on Reception feature wall or at desired location. The same to be pasted on feature wall with help of chemicals / 3M double side Tape/ SS frame .Complete in all respect as per direction of Engineer-In-charge.

Supply, installation testing and commissioning of vertical garden consisting of welded MS Structure, poly propylene green wall module with pots, Drip irrigation system and good-looking outdoor plants to create a natural vertical garden look. The MS structure for vertical garden of height 8.00 meter shall be designed by the specialized agency to be enaged for the work of vertical garden. MS structure to be finished with two or more coat of epoxy paint of approved quality and shade over one coat of primer. Poly propylene green wall module of size approx. 170mm x 470mm shall be mounted over MS Structure with the support of fastener/screw /nut bolt etc as required. EA module shall contain three poly propylene pots of size approx 125mm x 125mM Drip Irrigation system consiting of LLDPE Drip tubing 16 mm OD, 3.0 Kg/cm² rating, 2 LPH emitters at approx 150 mm spacing including all fittings and cpvc pipes of suitable sizes for making connection with existing irrigation main line and shall be capable to supply water to individual potted plants. Plantation of different type of outdoor good looking plants to create a natural vertical garden look with light weight. EA pot shall contain soil mixture having cocopit, vermi compost, parlite, vermilite & good earth, suitable for plantation. Vertical garden shall be completed in all respect including temporary staging & bracing and removal of the same after completion of vertical garden and maintenance till the handing over to client, all complete as per direction of Engineer-In-Charge.

CORE CUTTING

Drilling with core cutting machine in Post RCC beams, slabs, floors etc. if not mentioned in the drawing but required by Project Manager for laying pipes and rendering the same in RCC 1:2:4, finishing the same to the satisfaction of the Project Manager, including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing EPOXY based water proofing compound for sealing the joints around the pipes. (Maximum thickness of RCC members shall be 300mm for slab & wall , 600 mm for beam).

RCC Slabs

75 mm dia

150mm dia

RCC Beams

65mm dia.

160mm dia

Providing and fixing in position wall paneling of grooved wood panels estoof width 192mm, thickness of 16mm and length 2440 mm made up of high density fibre board with minimum density of 800 Kg/m3 substrate with a laminated facing as per the approved shade/species & finish with melamine balancing layer on the reverse side. The boards shall have a special perforation pattern of 3 mm grooves at 21mm pitch. The panels shall be highly moisture resistant and have fire resistance of Class I,BS 476 part 7.The edges of the panels shall be “tongued-and-grooved” to receive special clips for installation. The back of the perforated panels shall have sound absorbing non-woven acoustical fleece and backed with 50mm thick rock wool layer as directed by the Engineer-in-Charge. The panels shall be mounted on special channels using clips as approved by the Engineer -in-charge. Install G.I stud of section 48X34X36 mm or as approved by the Engineer -in- Charge on the solid wall using screws at spacing of 600mm centre-to-centre. Screw the aluminum channel (keel) on channeled G.I stud 600mm centre to centre. Install the first set of wooden panels by inserting the clips. For border channel insert the groove of the panel in to the projecting flange of the clip. Continue installing rows of panels by inserting the tongue into the groove of the earlier inserted panel and progressively installing clips for inside channel into the next aluminum channel (keel) and simultaneously fill the gap between wall & panel with 50mm thick rock wool having density of 48 kg/m3. Continue the process till the actual height is achieved. Use clips for border channel to finish off the installation, finish the edges and joints using wood molding of matching color (to be provided by others) as approved by Engineer-in- Charge. The installed panels should give an NRC of 0.9.

Providing and fixing Glass Reinforced Concrete (G.R.C) Screen at all levels & heights in approved size, pattern, design, thickness (minimum 35mm) and color. The Screens should be made from White Portland Cement, Quartz, Fine Silica Sand, Alkali Resistant Glass Fiber, Super Plasticizers, Polymers and U.V resistant Synthetic inorganic pigments should be used for pigmentation. The material casting should take place in Synthetic Rubber / FRP Mould. The fixing of Jali should be ‘Dry fixing’ i.e. to be done with MS/SS ‘L’ shaped Clamps, dash fasteners and pins etc complete as per site requirment and direction of Engineer-in-charge.

Designing, Fabricating, Manufacturing, Ins

tallation and testing of Glass Reinforced Concrete G.R.C. from liners of make “Unistone/Dalal Tiles/Everest/Birla/Seneisha” in approved size, pattern, design, thickness and color with dry fixing method, the form liners should be made from ’53 Grade’ approved white Portland cement in grade 18, quartz, fine silica sand, alkali resistant glass fiber manufactured. Polymers manufactured by approved manufacturer or equivalent, super plasticizers manufactured by approved manufacturer or equivalent with UV resistant synthetic inorganic pigments made by approved manufacturer or equivalent. The material casting should be done in synthetic rubber/FRP. Fixing of GRC form liners to be fixed on/between RCC/Block work column or structural steel work with dry fixing method with appropriate steel frame work, using fasteners, and necessary hardware etc. In building façade the form liners shall be securely fixed with stainless steel bolts and anchor fasteners (304 Grade) of required size at specified locations. The fixing shall be done by the specialized approved agency as directed by Engineer-in-charge.

ACOUSTICAL WALL PANELLING

Providing & Fixing of Acoustical Wall Panel of size 1220 x 2420 mm square/bevel edge with a thickness of 10 mm. The panels should be manufactured from 100% Polyethylene Terephthalate having density of 190 Kgs/m3. Manufactured Panels available in various colors to be installed as per the directions of the architect/engineer in-charge. Manufactured panels should be fire resistant as per B1 Class A. The recycle content should be 60% and fully recycled by conventional method. Installed panels should give an NRC of 0.7 – 0.9. INSTALLATION – Install GI studs 50X48X50 mm and 0.55 mm thick on plain walls. 50 mm thick Rock wool having density of minimum 48 Kg/m3 to be filled in the gap of GI stud. The PET panels to be installed on GI studs with the help of mechanical screws to be fixed firmly ensuring line and level of the panels. The installed panels to give an NRC of 0.9

Providing and fixing self adhesive type frosted glass film of 3M make or approved equivalent, in required pattern over glass etc. as per drawings, including cleaning the receiving surface of glass etc., all complete as per manufacturer's specification and direction of Engineer in charge:

Colored frosted film

BUILT IN /JOINERY & MISCELLANEOUS

The dimensions of the furniture as given in the respective items as below are indicative and there shall be no deviation of cost on account of this. However the tolerance limit for such deviations in sizes shall be limited upto 10% of any measurment mentioned in the item.

Low height storage Cabinet (Veneer finished)-375mm deep x 750mm high:Storage to be formed of 18mm commercial plywood and finished with 4mm thick approved shade of Veneer with adjustable shelves made of 18mm thick prelaminated MDF board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details & architect approval. Shutters of cabinet to be formed of 18mm thick commercial plywood finished with 4mm thk veneer on outer surfaces and 0.8mm thick approved shade of laminate inside. Rear backing of cabinet to be formed with 12mm commercial plywood complete in all respect including 100mm high veneer finished skirting as per approval/details. Exposed wood veneer surfaces to be finished with spray applied melamine polish. Storage to be complete with hardware installed as per the appoved model/make & as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. Each set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc. (Hettich/Hafele make) Basic price of Veneer @ Rs.685/ Sqmt+taxes (front area to be measured from bottom i/c height of leg/skirting to top of cabinet)

Full Height Storage (Laminate finish)-600 mm Deep

Providing and fixing full height storage cabinet formed of 18mm plywood formwork/carcass with adjustable shelves as per details.Shutter of storage cabinet to be formed of 19mm commercial board/plywood finished with 1mm thick laminate of approved shade. All internal surfaces to be post laminated with 0.8mm thick HP laminate to approved shade. All external exposed surfaces to be finished with 1mm thick HP laminate to approved shade and all exposed edges to be finished with 2mm thick PVC edge band (factory finished) as per details. Each set of shutters to be provided with 1 no multi purpose lock as specified, 6mm thick SS D type handles, auto bolt as per details. Exposed wood surfaces to be finished with spray applied melamine polish (front area to be measured and paid for).Hardware: All hardware shall be as per the appoved model/make (Hettich/Hafele make)

Overhead Storage : 450mm(D) x600/800mm (H) or as approved by EIC

Providing and fixing overhead storage cabinet formed of 18mm thick prelaminated MDF board formwork/carcass/adjustable shelves/shutters with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing .Shutter of overhead cabinet to be formed of 18mm thick prelaminated MDF board with all exposed edges finished with 2mm thick PVC edge band (factory finished) as per details shown in drawing. Exposed wood surfaces to be finished with spray applied melamine polish. The storage to have all necessary hardware, locks, handle etc. complete as per details. (front area to be measured).Cabinet to have provision for concealed lighting with providing & fixing removable cover made of 6mm thick milky white acrylic sheet fixed on 12x12x1.2mm Aluminium L-angle as indicated in the drawing and as per details.Storage to be complete with hardware installed as directed to consist of the following: Shutter to have 2 nos of automatic spring loaded hinge of approved make installed strictly a per manufacturers guidelines with requisite tools/jigs. Each set of shutters to be provided with 1no. multi purpose lock as specified, SS handles, auto bolt, etc.Hardware: The storage to have all necessary hardware/ Locks/ Handles/ Hinges complete as per details dra

wing & shall be as per the approved model/make.

BoQ_Ver3.0

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply,Installation,Testing and commissioning of Earthing termination made of copper-bonded rod of 3 meter length,17.2 mm dia. (Minimum copper bonding shall be 0.25mm) as per IS 3043, IEEE-80, NBC 2016 along with Earth enhancement material 30 kg/pit with resistivity of 0.12 ohm-mtr, and complying IEC 62561-7 and Pit Cover complying IEC 62561-5

Supply, installation, testing and commissioning of Main centralized controller / manager digital type of latest generation for VRV/VRF system (Each for 64 Indoor Units) for controlling all the indoor & outdoor units installed in building with adapters (for connecting additional indoor units, cost for the same is deemed to be included in this item) with On / Off, touch screen and Temparature Controls, fan speed, scheduling, air flow direction setting, operation history etc. The controller should be compatible with automation system (Bacnet/IP) with all accessories. It should be complete as per manufacturing standards & as per directions of Engineer-in-charge.

12 way, Double door

6 way Double door

6 way Double door

8 way Double door

8 way (4 + 24), Double door

Single pole

630A, 50KA, FPMCCB

Group – C

2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

2 X 16 sq. mm + 1 X 6 sq. mm earth wire

4 x 10 sq.mm + 2 x 6 sq.mm. earth wire

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for

the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 32 amps modular socket outlet and 32 amps modular switch, connection etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton

Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.Make:KEI,Worldcab,RR Kable,Bonton

Supplying and fixing of call bell / buzzer suitable for single phase,230 volt complete as required.

Supply Installation, testing & commissioning of Integral LED 4ft batten with buil-in PIR occupancy sensor. The batten shall have housing made of CRCA Only & the front diffuser shall be made of polycarbonate/polystyrene (Diffuser-Non yellowing type). The LED used shall have life of 50000Hrs @ L70B50, CCT of 6500°K, SDCM≤5 & CRI≥80. The LEDs used should be from Philips/Signify/APT Electronics/Osram/Nichia/Cree/Lumileds/Bridgelux. Luminaire shall be designed to deliver minimum system lumen output of 3900lm at a system efficacy of ≥130 lumen/watt. The electronic driver used shall have a power factor ≥0.95 (@full load) and THD ≤10% (@full load), suitable for an operating voltage range of 140-270V AC, Current Ripple ≤5% (@full load), Internal surge protection should be minimum 4KV, high-low voltage cut-off, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The minimum dimensions (±5mm) of the batten shall be 44mm X 51mm X 1221mm. The luminaire brand name shall be embossed/engraved on the luminaire/accessory/Endplate/Rim/Frame/end caps & not put using sticker/screen printing. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 as pr 2019 standard issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. Similar to above Specs in Signify (Philips/Ecolink), Endo/LT.

Supply Installation, testing & commissioning of Recess LED Luminaire made of CRCA & sealed optical modules in shape of a pyramid or inverted cup made of Injection molded polycarbonate/plastic/polystyrene/ABS Plastic. The luminaire shall employ deep recessed diffused optical compartments with individual diffuser for each optical module. The luminaire shall comply to UGR≤16. The luminaire shall have IK rating of IK-02. The luminaire should not have single flat diffuser for whole luminaire. The luminaire shall have System efficacy of ≥130lumens/watt. The luminaire shall deliver system lumen output of 4000 lumens. The LEDs used shall have CCT of 6500°K having CRI≥80, & SDCM≤5 & life class of 50000hrs @ L70B50. The LEDs used should be from Philips/Signify/APT Electronics / Osram / Nichia / Cree / Lumileds / Bridgelux. The luminaire shall use DALI driver having factor ≥0.95 (@full load) and THD ≤20% (@full load), current ripple ≤5% (@full load) suitable for an operating voltage range of 140-270V AC, Internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire brand name shall be embossed/engraved/screen printed on the luminaire/accessory/Endplate/Rim/Frame. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. The luminaire dimension shall be 595MM X 595MM with minimum luminaire height as 70MM. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, "F

Supply Installation, testing & commissioning of Recess LED Luminaire made of CRCA & sealed optical modules in shape of a pyramid or inverted cup made of Injection molded polycarbonate/plastic/polystyrene/ABS Plastic. The luminaire shall employ deep recessed diffused optical compartments with individual diffuser for each optical module. The luminaire shall comply to UGR≤16. The luminaire shall have IK rating of IK-02. The luminaire should not have single flat diffuser for whole luminaire. The luminaire shall have System efficacy of ≥130lumens/watt. The luminaire shall deliver system lumen output of 4000 lumens. The LEDs used shall have CCT of 6500°K having CRI≥80, & SDCM≤5 & life class of 50000hrs @ L70B50. The LEDs used should be from Philips/Signify/APT Electronics / Osram / Nichia / Cree / Lumileds / Bridgelux. The luminaire shall use DALI driver having factor ≥0.95 (@full load) and THD ≤20% (@full load), current ripple ≤5% (@full load) suitable for an operating voltage range of 140-270V AC, Internal surge protection should be minimum 2.5KV, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The luminaire brand name shall be embossed/engraved/screen printed on the luminaire/accessory/Endplate/Rim/Frame. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. The luminaire dimension shall be 595MM X 595MM with minimum luminaire height as 70MM. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, "F

AT" before dispatch as per IS 10322 & IK Test. The luminaire dimensions shall be 595mm X 595 mm X 70mm. The successful bidder must submit the NABL accreditation certificate along with scope of NABL accreditation for Luminaire manufacturer before supply of material. The driver shall be of the same make/brand/lighting company as that of LED luminaire. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. Similar to above Specs in Signify (Philips/Ecolink), Endo/Igguzini.

Supply Installation, testing & commissioning of Integral LED 2ft batten. The batten shall have housing made of CRCA Only & the front diffuser shall be made of polycarbonate/polystyrene (Diffuser-Non yellowing type). The LED used shall have life of 50000Hrs @ L70B50, CCT of 6500°K, SDCM≤5 & CRI≥80. The LEDs used should be from Philips/Signify/APT Electronics/Osram/Nichia/Cree/Lumileds/Bridgelux. Luminaire shall be designed to deliver minimum system lumen output of 2000lm at a system efficacy of at-least 125 lumen/watt. Power consumption should not be more than 16W (±2W). The electronic driver used shall have a power factor ≥0.95 (@full load) and THD ≤10% (@full load), suitable for an operating voltage range of 140-270V AC, Current Ripple ≤5% (@full load), Internal surge protection should be minimum 4KV, high-low voltage cut-off, electrical insulation class should be Class I & driver should be of Class B serviceability. The luminaire should be at least IP20 & IK02 rated. The minimum dimensions (±5mm) of the batten shall be 44mm X 51mm X 585MM. The luminaire brand name shall be embossed/engraved on the luminaire/accessory/Endplate/Rim/Frame/end caps & not put using sticker/screen printing. The luminaire driver shall be of the same make/manufacturer as that of LED luminaires. Luminaire manufacturer must have In-house NABL accredited lab to conduct LM79 as per 2019 standard, Type test as per IS10322, "FAT" before dispatch as per IS 10322 & IK Test. The successful bidder must submit the NABL accreditation certificate for Luminaire manufacturer before supply of material. The LED Luminaire & it's driver both should be BIS registered. Successful bidder shall submit the following reports before supply of material for approvals LM79 as per 2019 standard issued by NABL accredited lab, LM80 issued by LED manufacturer, Type Test Certificate for luminaire as issued by NABL accredited lab, BIS certificate for LED Luminaire & Driver. Similar to above Specs in Signify (Philips/Ecolink), Regent/Endo.

LED Pendant Linear UP-Down luminaire LED (Light Emitting Diode) system power: 64W (40W down and 24W Up ), luminous flux of luminaire 7680 lm, colour temperature of 4000K, CRI>80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours, energy efficient LEDs, direct light emission, luminaire profile in aluminium with white colour powder coated, internal wiring, integral electronic control gear.Protection class I, IP20 L = 1200 mm, B = 50 mm, H = 75 mm Make : PHILIPS Prodcut Code : 5075UPDOWN Equivilent make- HAVELLS , LEGERO

LED Deep Recessed Round downlight ARES with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 12W, Luminous flux of luminaire 1440 lm, Colour temperature of 4000K (neutral white), CRI > 90, THD<5%, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, electronic control gear. Protection class II, IP 20 Ø = 120 mm, DA(Ø) = 110 mm, H = 50 mm. Make : PHILIPS Product Code : DMARES12 Equivilent make- HAVELLS , LEGERO

1No. 200A FP MCCB(16 KA) with PRTM

LED Deep Recessed Round downlight ARES with HPE (High-Performance Efficiency) with LED (Light Emitting Diode), system power: 18W, Luminous flux of luminaire 2160 lm, Colour temperature of 4000K (neutral white), CRI > 90, THD<5%, 230V constant current driver, 70% of luminous flux after 50,000 operating hours; energy-efficient LEDs, direct light emission, housing in die-cast aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment trim, prismatic diffuser for homogenous light distribution, electronic control gear. Protection class II, IP 20 Ø = 155 mm, DA(Ø) = 145 mm, H = 50 mm. Make : PHILIPS Product Code : DMARES18 Equivilent make- HAVELLS , LEGERO

Sets of 200/5A, CL-1, 15VA CTs for measuring.

Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor

1 Set of 250A TPN Copper Bus Bar with colour coded PVC Sleeves

not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.

SITC Fresh air fan 250 mm

MAIN PANELdescrived above

UPS PANELdescrived above

8 no 100 A 4P MCB

19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

8 Way VTPN DB

8 Way VTPN DB descrived above

1No. 63A FP MCB

Telephone socket outlet

4 no 63 A TP MCB

3 no 25 A SP MCB

SUB HEAD - V : SERVER, DATA & NETWORKING

TV antenna socket outlet

Supplying and fixing of RJ-11/RJ 45 (Both Twin socket)I/O Telephone outlet with shutters along with suitable base plate,key stone and surface/concealed back boxes of adequate module size, etc comple in all respect.

1 or 2 Module (75mmX75mm)

1 run of cable

2 run of cable

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

3 run of cable

Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed st

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.

eel/ PVC conduit as required.

Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required

Supply, installation, testing & commissioning of One Set of 2 Nos., 120 KVA(1W+1S) UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 30 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other. Make : Emerson, ABB, Numeric, Schneider, Vertiv

300 x 38 mm Raceway

250 x 38 mm Raceway

200 x 38 mm Raceway

SUB HEAD - VI: UPS

Supply, installation, testing & commissioning of One Set of 2 Nos., 120 KVA(1W+1S) UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 30 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other. Make : Emerson, ABB, Numeric, Schneider, Vertiv

300 x 38 mm Raceway

250 x 38 mm Raceway

Total of Sub-Head - VII

Supply, installation, testing & commissioning of One Set of 2 Nos., 120 KVA(1W+1S) UPS. Each UPS should have following specifications in addition to tender requirements : (i) True online double conversions, IGBT Rectifier & inverter based UPS. (ii) Three phases Input/ three phase output (Input Line Voltage: 340 - 478 Volt, 3 phase, Output Line Voltage 400 volt, 3 phase) (iii) SMF batteries complete with MS Fabricated battery rack to accomodate the complete battery system. (iv) Suitable for 30 Min backup on Full load at 0.8 Load P.F., with required nos. of Battery with Working UPS only. (v) Output THD is less than 3% for full linear load & Less than 5 % for nonlinear load. (vi) Crest factor 3:1 (vii) over load 125% for 10 min, 150% for 1 min and should be able to operate continuously at 115% load on bypass mode. (viii) Battery type should be Valve regulated lead-acid (VRLA). (ix) Inbuilt Delta - Star Input Isolation Transformer, parallel communication port, RS232, USB, EPO and SNMP interface, BMS interface. (x) Dust Filter at Air Inlet point are required. (xi) UPS should be provided with environment monitoring probe to measure temperature and humidity of UPS room on SNMP card software. (xii) LCD Display indicating all important parameters. (xiii) UPS shall be provided with Temperature and Humidity Sensors to monitor Temperature and Humidity over LAN. (xiv) Battery open rack with top cover, battery interlinks and battery breaker. (xv) Battery to UPS cable as required should be provided with UPS systems. (xvi) UPS system shall be parallelable upto 6 units in case required in future. (xvii) Each UPS shall be compatible for working in parallel redundant mode with other. Make : Emerson, ABB, Numeric, Schneider, Vertiv

300 x 38 mm Raceway

250 x 38 mm Raceway

200 x 38 mm Raceway

SUB HEAD -VII : RACEWAY AND CABLE TRAY

Metal Raceways : Floors Supply and fixing in position of following size of under floor GI raceways [consists of body & cover] for distributing cabling in screed floor installations. Raceway should be made up of Pre galvanized sheet conforming to IS 277 with thickness of 1.6mm consists of Body and Openable cover with 275 GSM coating. Raceway should be supplied with required accessories such as fixing brackets and coupling plates as required. Raceway should be confirmed with the standard EN 60-670 and EN 50085-2-2, IP 20 & IK08 in recess / on surface including chasing the wall/floor complete as required of following configurations:

150 x 38 mm Raceway

Metal Junction Box : Floors Supply and fixing in position height adjustable under floor crossover Junction box for Raceways for direct access to cables at the intersection of Raceways supplied completely with base and cover plate [lid]. Junction box should be made of Pre galvanized sheet consist of body and cover. Height of the junction box should be adjustable from minimum 65mm. Junction box should be supplied with the metal cover for protecting the junction box during constructions at site. It should be confirmed with the standard EN 50085-2-2 including all accessories complete as required of following sizes:

Sizes:

100 x 38 mm Raceway

BoQ_Ver3.0

ty complete with all accessories as per manufacturers specifications.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Providing and Fixing Flow Switches of following sizes MS Pipe including connection etc as required .

25 mm dia

Metre

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

50 mm dia

65 mm dia

80 mm dia

Single Headed Gunmetal Material

80 mm dia

Supplying and Fixing orifice plate made out of 6 mm thick stainless steel ( Grade 304 ) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg / sqcm complete as required .

Gunmetal Material

Pendent Sprinkler

80 mm dia

Upright Sprinkler

700 mm Length

1000 mm Length

1200 mm Length

1500 mm Length

Providing , Installation , Testing and Commissioning of adjustable rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as required .

Providing and fixing of Fire Hose Cabinet size not less than 2.1 x 1.2 x 0.90 mtr made out of M.S. sheet not less than 1.5 mm thick having central opening and 4 mm thick glazed glass doors (Two nos.) suitably marked on the outside 'with the letters "FIRE HOSE" including necessary locking arrangement and painting in PO red colour suitable to accommodate, internal hydrant valve, 2 nos 15 mtr long Hose pipe, branch pipe, nozzle and fire man's axe. It shall be fixed inside the FHC Cabinet Complete as required .

Providing and fixing standard firemans axe with heavy rubber handle.

Providing and fixing dial type pressure gauge with isolation cock and copper pipe on main header Dial diameter 100 mm celebration 0-16 / sq. cm.

Providing and fixing Fire Extinguishers (CO2 type powder ) 4.5 Kg Capacity complete with all accessories as per manufacturers specifications.

Providing and fixing Fire Extinguishers (A, B, C type powder ) 6 Kg Capaci

BoQ_Ver3.0

speaker cable Two pair, 2-core, 1.5 sqmm

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

CABLING & WIRING

PUBLIC ADDRESS SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal detector complete with mounting base complete as required. Synchronisation with existing Fire Detection & Alarm System (Make-Eaton/Cooper) Model - ULCAPT340+UCAB300

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS Box having two LED, metallic cover complete with all connections etc as required. Synchronisation with existing Fire Detection & Alarm System

Supplying, installation, testing & commisssioning of intelligent addressable programmable sounder complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ENHNR+ULMCOM-S

Supplying, installation, testing & commissioning of fault isolator complete with base as required. Synchronisation with existing Fire Detection & Alarm System

Supplying, installation, testing & commissioning of intelligent addressable thermal detector with rate of rise cum fixed tempreature thermistor complete with base as required. Synchronisation with existing Fire Detection & Alarm System Model - ULCAH330+UCAB300

Supplying, installation, testing & commissioning of addressable fire control module complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ULMCOM

Supplying, installation, testing & commissioning of addressable phone control module complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ULMCIM

Supplying, installation, testing & commissioning of addressable manual call point complete as required. Synchronisation with existing Fire Detection & Alarm System Model - SG42BK2+ULMCIM-C

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ENHSR+ULMCOM-S

Supplying, installation, testing & commissioning of addressable strobe complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ENHSR+ULMCOM-S

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of Cross Linkable Ethylene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required. Approved Make: Honeywell / Bosch / Aties

Supplying, installation, testing & commissioning of addressable manual call point complete as required. Synchronisation with existing Fire Detection & Alarm System Model - SG42BK2+ULMCIM-C

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ENHSR+ULMCOM-S

Supplying, installation, testing & commissioning of ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required. Approved Make: Honeywell / Bosch / Aties

Supplying, installation, testing & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required. Approved Make: Honeywell / Bosch / Aties

Meter

speaker cable Single pair, 2-core, 1.5 sqmm

Supplying, installation, testing & commissioning of addressable strobe complete as required. Synchronisation with existing Fire Detection & Alarm System Model - ENHSR+ULMCOM-S

BoQ_Ver3.0

SITC of connector and accessories with all required accessories for above configuration etc all complete

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

SUB HEAD - VIII; AUDIO VIDEO ESTIMATE

Conference Room

SITC of 86" Display Panel, 4K UHD (3840 x 2160p) Resolution, Edge-lit LED, Brightness 400 Nits, Contrast ratio 1200:1, Viewing angle 178 degrees h/v, Display colors: 10 bit, 1.07 billion, Video inputs 4 HDMI 2.0, DisplayPort, VGA, OPS module slot; Audio in, Control inputs: RS232, Ethernet, HDR10 support, 2 x 10W built-in speakers etc all complete Approved Make: Christie / Panasonic/ Samsung/Planar

SITC of Wall Moount Kit for screens 65” to 100" display, Max load: 100kg (220lbs) with all required accessories etc all complete Approved Make: CPMG / Peerless / Chief

SITC of 5×2 Matrix Switcher with USB and Wireless Link, with HDMI, DisplayPort, USB-C, and wireless inputs, USB-C input for AV, data, and device charging, Native wireless casting for iOS, AndroidTM, Mac, Chromebook, and Windows, USB 2.0 interfacing and extension up to 330 feet (100 meters), 4K/UHD capability @ 60 Hz with 4:4:4 chroma sampling on local ports (HDMI, DisplayPort, and USB-C) et c all complete Approved Make: Aurora / Lightware / Extron/ATEN/Kramer

SITC of HDBaseT Receiver for HDMI with USB, HDBaseT receiver for HDMI®, Ethernet, power, control, and USB, USB 2.0 interfacing and extension up to 330 feet (100 meters), 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling, HDCP 2.2 compliant, Remote powering over HDBaseT or local powering et c all complete Approved Make: Aurora / Lightware / Extron/ATEN/Kramer

SITC of PTZ Camera with HDMI Output and USB : Designed for video conferencing and other applications such as lecture capture and distance education, HDMI output, USB 2.0 interface for video and camera control, Universal PC compatibility through standard UVC (USB Video Class) driver, High performance imaging, fine detail, and color rendering with 1/2.8″ low-noise, HD CMOS sensor, Multi-element zoom lens with 10x optical zoom and a 60.9° horizontal field of view et c all complete Approved Make: Sony / ATDSC / Lumens

SITC of Digita Conference System: Controller with Recording & Web Server, built-in Digital Signal Processing, Control upto minimum 50 Discussion Unit and expandable upto 150 Discussion Unit by configuring multiple Controller Unit, 4 Bus Connection. 4 Branches. OR 2 Closed Loop for redundancy mechanism, Camera Control Integration Capability, Conference Mode: Direct access, Request, Push to talk, FIFO, Vox control, Digital Acoustic , Feedback Reduction, With Audio Input & Output for connectivity with external sysytem like amplifier, microphone & audio/video conference system, Audio Quality 16Bit digital, CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete Approved Make : Shure/Bosch/Televic

SITC of Digita Conference System: Chairman Discussion Unit with Gooseneck Microphone of minimum Length 400mm, built-in Digital Signal Processing, Unit with Priority and Next-in-Line Configuration, Priority button silences all delegate microphones and allows only the chairperson to speak, User Button with Feedback, Shielded microphone, immu

ne to mobile phone interference , High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz, Microphone with 400-500mm Gooseneck Length with Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A, Connection: Screw Lock CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete Approved Make : Shure/Bosch/Televic

SITC of Digita Conference System: Delegate Discussion Unit with Gooseneck Microphone of minimum Length 400mm, built-in Digital Signal Processing, Unit with Microphone On / Off Button with Feedback, Shielded microphone, immune to mobile phone interference , High-quality integrated loudspeaker, Headphone output with Volume Adjustment, Loop-through, daisy-chain cabling, Different LED Signalling for Mic On/Off OR Request-to-Speak Push Button, Audio Quality 16Bit digital, Frequency Response: 30Hz-15kHz, Microphone with 400-500mm Gooseneck Length with Polar Pattern: Unidirectional, Cardioid, Max SPL @ 1kHz: 110dB SPL, S/N Ratio: 67dB-A, Connection: Screw Lock CE Certified and should not be be manufactured (Country of Origin) in China. Preferebly Europe/North Amercica. etc all complete Approved Make : Shure/Bosch/Televic

SITC of Digita Conference System: Cat 5e / Cat6 Cable and connectors for above digital coneference system setup etc all compete

Digital Smart Mixer with Digital Processing on Input & Output, with USB audio interface for soft codec integration.Input Channel : Minimum 6x Mic / Line or more, 1 x Stereo Line Input. Onboard acoustic echo canceler (AEC) processing. Output Channel : Minimum 3x line output or more. USB audio interface for soft codec application.Digital Network Link Port for future expansion.IP / RS232 port for third-party control.Signal to Noise Ratio: 90dB or more.THD: 0.03% or better.Certification : CE, FCC Approved Make : QSC/Crestron, Kramer

SITC of 5" Surface-Mount Loudspeaker, 50 Watts continuous, 200 Watts peak power, Frequency response (-3 dB) 90 Hz - 22 kHz, Nominal Coverage Angle: 90 degrees conical, Transformer Taps (via front rotary switch): 30 W / 15 W / 7.5 W / 3.75 W / OFF & Low impedance operation, System sensitivity (1 W @ 1m): 88 dB etc all complete Approved Make: JBL/Bose/Shure/Extron

SITC of 2 x 240W Commercial Amplifier with Energy Star Certification, Low-Z (4/8 Ohm) and High-Z (70/100 V) operation per output with switchable high-pass filter, 240 W at 4 or 8 Ω per channel, GPI remote volume control using standard RJ-45 connector and Ethernet cable etc all complete Approved Make: JBL/Bose/Shure/Extron

SITC of 3 feet Ultra–Slim Flexible High–Speed HDMI Cable with Ethernet, Max Resolution — 4K@60Hz (4:4:4) etc. all complete Approved Make: Lightware / Extron / Kramer / Belden / Krystal/

SITC of 15–pin HD & 3.5mm Stereo Audio Cable: 6 Feet etc. all complete Approved Make: Lightware / Extron / Kramer / Belden / Krystal/ Falcon / MX / Neucore

SITC of 6 Feet USB Type–C to USB-C Cable, support up to 4K@60Hz (4:4:4) resolution etc all complete Approved Make: Lightware / Extron / Kramer / Belden / Krystal/ Falcon / MX / Neucore

BoQ_Ver3.0

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Point wiring per Access Point Point wiring per access point for each Access Reader including 8-core shielded, RF/EM resistant, 2C*1.5 sq.mm Power Cable, PVC insulated tinned multistrand copper conductor cable with Conduit.

VOICE AND DATA NETWORK ; MS CHANNEL ,CONDUITS

Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

1 run of CAT 6A UTP Cable

Supply and termination of Cat-6A I/O

Supply of Duplex /Quad Faceplate

BoQ_Ver3.0

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Supply and fixing of Cat-6A -7'Mounting cord

Supply and fixing of Cat-6A -3'Mounting cord

Supply and fixing of 12U closed network Rack with 2 fan tray.

Metre

SITC of 2 MP Full HD Intelligent (1920*1080) Fixed Dome Type IP Colour Camera as per specifications mentioned in Clause 4.0 CCTV Specifications or with higher/better quality/specifications with required mounting arrangement as required etc all complete. Make: IDIS / Univeiw / Bosch / Honeywell / Palco

SITC of 32 Channel Network Video Recorder, Support Ultra H.265 / H.265 / H.264 video formats, Supports mainstream cameras of ONVIF conformance (Profile S, Profile G, Profile T ) and RTSP protocols, Support 2-ch HDMI, 1-ch VGA. HDMI1 and HDMI2 up to 4K (3840x2160) resolution, HDMI1, HDMI2, VGA independent outputs provided, Up to 12 Megapixels resolution recording, Support RAID 0, 1, 5, 6, 10, 8 SATA HDDs, Up to 10TB for each HDD, Various fisheye dewarping modes for live view and playback for both web interface and GUI, Support N+1 Hot spare, Support for 12V Power output, ANR technology to enhance the storage reliability when the network is disconnected, Support cloud upgrade Intrusion Detection, Cross Line Detection, Enter Area, Leave Area, Defocus Detection, Scene Change Detection, Auto Tracking, Object Left Behind, Object Removed, Vehicle Control, People Flow Counting, Crowd Density Monitoring, 2 RJ45 10M/100M/1000M self-adaptive Ethernet Interfaces, RS232, RS485, Alarm In 16-ch, Alarm Out 4-ch, CE, FCC, UL, RoHS, WEEE, EN 55032: 2015, EN 61000-3-3: 2013, EN IEC 61000-3-2: 2019, EN 55035: 2017, Part15 Subpart B, ANSI C63.4, NDAA certified with required mounting arrangement as required etc all complete Make: IDIS / Univeiw / Bosch / Honeywell / Palco

SITC of 10TB SATA Surveillance Hard Drive for NVR, Read Speed 6 Gigabytes Per Second etc all complete (for 30 days of storage) Make: QD / Seagate / Toshiba

SITC of 43" Display Panel, 4K UHD (3840x2160) Resolution, Brightness: 450 cd/m², Response time (typical): 8 ms, Display colors: 16.7 Million, Operating system: Android 9, Contrast ratio (typical): 1200:1, Video input: HDMI 1.4 (x2), USB 2.0 (x2), Audio input: 3.5 mm jack, Audio output: 3.5mm jack, External control: RJ45, RS232 with wall mount etc all complete Make: Samsung / Philips / Panasonic / LG

Supply, installation, testing & commissioning of 24-Port Gigabit Access PoE Switch, 24 x 10 / 100 / 1000 BASE-T PoE ports, 4 x Gigabit RJ45/SFP Combo ports, Advanced L2 switching and security features, L2+ Static Routing, 193 W PoE budget with FIber module etc all complete as per specifications

mentioned in Clause 4.0 CCTV Specifications Make: D Link / Netgear / Zyxl

Supply , Installation , Testing and Commisioning of Core Layer 3 Stackable Managed Gigabit Switch: 24 x 10/100/1000BASE-T ports, 2 x 10GBASE-T and 4 x 10G SFP+ ports provide all the uplink capacity, Premium L2 and L3 features, RIP/RIPng and OSFPv2/v3 dynamically map out your network, aiding data to get to its destination via the fastest route possible, 80 Gbps per device physical stacking bandwidth with FIber module etc all complete as per specifications mentioned in Clause 4.0 CCTV Specifications Make: D Link / Netgear / Zyxl

Supply , Installation , Testing and Commisioning of High-Speed Gigabit Ethernet UTP 250 MHz Class E Cables for Cat 6 Consists of 23AWG Solid Bare Electrolytic Grade Copper Conductors, HDPE Insulated Twisted 4 Pair, RipCord, and LSZH Outer Jacket, Gigabit Ethernet (1000 Base-T), 305 Meter per roll etc all complete Make: 3C3 / D Link / R&M / Molex

BoQ_Ver3.0

Seats

Extra for cutting reinforcement bars in R.C.C. or R.B. work (Payment shall be made on the cross sectional area of R.C.C. or R.B. work)

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

meter

TOTAL AMOUNT Without Taxes in INR

MODULAR FURNITURE

Note -1 : The Modular furniture products should be from the manufacturer which have BIFMA X5.5 certification (from BIFMA approved Test Lab), Bifma E3, RoHS, GREENGUARD, AIOTA Certification. Note -2: The dimensions of the furniture as given in the respective items as below are indicative and there shall be no deviation of cost on account of this. However, the dimensions mentioned below may vay in between ± 10% during execution as directed by Engineer-In-Charge. Note -3: The finishes are to be of highest quality standards conforming to the best workmanship and nothing extra shall be payable on this account. All items in this section shall be madular furniture as trictly as per List of Makes attached

Non Executive Cubicle Table - Supplying, and placing in position wooden laminate general manager table as per drawing, size (1800 x 1500 x 600 x 750). This includes the L Shaped Table with one pedestal. The product should be as per above given specification under the guidance of project architect & Engineer-in-charge. The product to be matched with the photograph attached herewith. (Table/ side top thickness should not be less than 25 mm, side table carcass thickness & modesty panel thickness should not be less than 18 mm)

Supplying, and placing in position laminated Meeting table as per drawing, Size (Ф1500*750) . The table is made with MS Tapered Chrome Finished pipe frame of min 1.2mm thickness. All the other structure members shall be duly powder coated with 40+ microns over all surfaces. All sheet metal parts must be finished with a durable, black, electrostatic powder coating. Table should have provision of Rubber pad at the bottom of floor plate to avoid movement. Flap should be provided on the top for power and data sockets including a cable vertibre for wire routing.

Providing & Placing Back Storage & Side Storage as per photograph. The Storage top shall be made out of 25 mm thick Pre- Laminated Particle Board of approved shade, design and colour. All exposed edges are sealed with 2mm thick pvc edge banding tape pressed at 200 degree C with hot melt glue on special machines. The understructure shall be made out of 18 mm thick Pre-Laminated Particle Board. The storage is having openable shutter with locking arrangement.The storage is having 18mm thk. PLPB shelves. The product should be as per above given specification under the guidance of project architect & Engineer-in-charge. Tolerance level + 10% in size shall be deemed to be inclusive in the quoted price. The product to be matched with the photographa attached herewith. following sizes as below

Back Storage Size: 1260(w) x 450(D) x1200(Ht)mm.

Back Storage Size: 1290(w) x 450(D) x1200(Ht)mm.

Back Storage Size: 2085(w) x 450(D) x1200(Ht)mm.

Back Storage Size: 2915(w) x 450(D) x1200(Ht)mm.

Back Storage Size: 3000(w) x 450(D) x1200(Ht)mm.

Back Storage Size: 1500(w) x 450(D) x750(Ht)mm.

Back Storage Size: 2230(w) x 450(D) x750(Ht)mm.

Back Storage Size: 2370(w) x 450(D) x750(Ht)mm.

Back Storage Size: 2430(w) x 450(D) x750(Ht)mm.

Back Storage Size: 2388(w) x 450(D) x750(Ht)mm.

Supplying, and placing 2 Seater Sofa with Synthetic Leather upholstry. sofa as per drawing, of following sizes as shown in drawing. This includes Sofa with PU Leather Finish, Solid Wood & Ply Board and Inner Frame Steel Legs. The backrest shall be approx 900mm high PU Leather finish over Cushioned /foamed layer as per Manufactureres specificatons and shall be got approved by EIC. The product should be as per above given specification under the guidance of project architect & Engineer-in-charge.Tolerance level + 10% in size shall be deemed to be inclusive in the quoted price. The product to be matched with the photographs/Layout.

Supplying, and placing of side table with glass top as per drawing, Size (Ф450*450) . The table is made with MS Tapered Chrome Finished pipe frame of min 1.2mm thickness. All the other structure members shall be duly powder coated with 40+ microns over all surfaces. All sheet metal parts must be finished with a durable, black, electrostatic powder coating. Table should have provision of Rubber pad at the bottom of floor plate to avoid movement.

BoQ_Ver3.0

200 mm width X 50 mm depth X 1.6 mm thickness

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

Mid Back Chairs for Non Excutive and Visitors

High Back Chairs for the Manager – Chrome plated metal Base with nylon castors – Gaslift for seat height adjustment – Moulded Seat with Black Fabric Upholstery – PP backrest frame with nylon Mesh – Single Locking Knee Tilt mechanism – Headrest height & angle adjustment – Upward and Downward adjustable Armrest – Swivel chair for easier to rotate

Control Room Console for 5 users Dual Monitor as per tender specifications Dimesions - 5400 x 1000 x 750mm (WxDxH) (Please refer dteailed specifications for the same The bidder must associate with a single control room interior solution provider (associate agency) that specializes in executing control room works, including control desks and furniture, and fully complies with the technical specifications and Bill of Quantities (BOQ) outlined in this RFP. The associate agency must provide a comprehensive point-by-point compliance report with the technical specifications and submit all necessary documents as specified in the technical specifications and BOQ for control desks, and furniture, along with the bid. For detailed information on the control desks, and furniture requirements, please refer to the relevant section of the RFP. Approved Make : Evans, Pyrotech Workspace, Winsted

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing and fixing white vitreous china cistern with dual flushing fitting,of flushing capacity 3 litre/6 litre( adjustable to 4 litre/8 litres),including seat cover and cistern fittings,nuts,bolts and gasket etc. complete.

a) White Vitreous China Wash basin size 630x450 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms

Providing and fixing toilet paper holder

C.P. brass

Supply, Receiving, Storing & Fixing of C.P. brass twin coat hook with PVC rawl plug & C.P. brass screw complete as required. Make :

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931.

Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.

15 mm nominal bore with 45 cm length

Providing and fixing Chromium Plated towel ring Rectangular shape with concealed fittings arrangement of approved quality and colour, of approved brand & manufacture complete as per direction of Engineer in Charge.

Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690mm of approved shape including providing and fixing white vitreous china cistern with dual flushing fitting,of flushing capacity 3 litre/6 litre( adjustable to 4 litre/8 litres),including seat cover and cistern fittings,nuts,bolts and gasket etc. complete.

Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing low flow type two way bib tap as per approved make complete in all respect as per engineer in the charge.

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing low flow type two way bib tap as per approved make complete in all respect as per engineer in the charge.

led work, including cutting chases and making good the walls etc.

20mm nominal bore

25mm nominal bore

32 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :

25 mm nominal bore

SOIL, WASTE, VENT PIPES, RAIN WATER PIPES & FITTINGS.

Providing and fixing soil, waste and vent pipes

Providing, laying, Jointing, Testing and commissioning of uPVC pressure pipes of 6Kg/Sqcm pressure rating class 5 (IS : 4985-2000) including fittings, tees, bends, clamps, coupling and adaptors supports, and jointing with solvent joint, testing and necessary earth work in excavation, backfilling, disposal of surplus earth with a lead upto 50m complete, compaction and consolidation Including laying cement concrete 1:2:4 alround UPVC pipe including bed concrete and thrust blocks at bends as per standard design (For Soil & Waste Pipe)

Supplying, Installation, Testing and Commissioning of uPVC, P or S trap of self cleansing design with / without vent. arm Setting in cement concrete 1:2:4 mix complete including cost of cutting & making good the Wall / Floors wherever required.

BoQ_Ver3.0

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

18 H.P Cool / Heat Pump Unit

10 H.P Cool / Heat Pump Unit

2.5TR 4-WAY CASSETTE UNIT

2.0TR 4-WAY CASSETTE UNIT

1.59TR 4-WAY CASSETTE UNIT

1.0TR 4-WAY CASSETTE UNIT

Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.

EARTHING:

4.0 TR 4-WAY CASSETTE UNIT

7.0 TR DUCTABLE SPLIT TYPE UNIT (1W+1ST)

7.0 TR DUCTABLE SPLIT TYPE UNIT (1W+1ST)

on 43C ambient temperature to achieve 23 deg C

Server Room (500-1000 Sq.ft Area) - 1000 CFM Chemical Scrubbers Units

150 mm width X 50 mm depth X 1.6 mm thickness

110 x110 mm outlet

Providing and fixing floor drain with jali size 110X50 size inlet and outlet including cutting and making good the walls and floors wherever required complete in all respects.

110 x 50 mm outlet

Providing and fixing 125 mm dia, 3 mm thick Stainless steel grating with frame for floor traps or drains of required pattern including cutting and making good the floors complete.

125mm dia.

Providing and fixing cast brass Cleanout plug with suitable insert keys for opening in brass cap, male threaded joint/reducer with G.I. socket caulked to Pipe/fittings of CI pipe including cost of lead joints etc. complete in all respect.

100mm dia.

550 CFM (15mm static pressure, single phase)

450 CFM (15mm static pressure, single phase)

125 Dia. (with metal blade)

25 mm dia pipe, 13 mm Insulation

32 mm dia pipe , 13 mm Insulation

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.9 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

19.1 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.6 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

24 G, Thickness 0.63 mm sheet (Up To 750 mm)

22 G, Thickness 0.80 mm sheet (751 to 1500 mm)

Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications.

Supply, installtion and testing of Powder coated Aluminium extruded grills / diffusers as per sp

ecifications given in tender and of following sizes.

Sub Head 'D' - HVAC Electric Work

Electrical Sub Panel

ELECTRICAL PANEL for VRV Outdoor Units (10 HP,18HP)

Incoming (All amps TPN MCCB shall be suitalbe for below mentioned Outdoor unit capacity)

630 Amps TPN MCCB with following accessories:

Phase indicating light with control MCB's.

Outgoings (All amps TPN MCCB shall be suitalbe for below mentioned Outdoor unit capacity)

1 Nos. 63 amps TPN MCCB with outgoing feeder to 1 No. 10 HP VRV outdoor unit. 1 Nos. 63 amps TPN MCCB with outgoing feeder to 1 No. 18 HP VRV outdoor unit. The compartment shall contain an indicating lamp with MCB for ‘ON’ status of compressor motor.

Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications.

Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers without volume control dampers complete as required.

Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Return air diffusers of powder coated aluminium without volume control dampers with anti smudge ring & removable core.

Supplying, fixing testing commissioning of Fresh / Exhaust air louvers with bird screen & damper

POWER CABLES

Supply and laying of the following 1100 volt grade armoured XLPE insulated and PVC sheathed aluminium conductor cable in trench / cable tray /clamped to wall with suitable clamps saddles & fixing bolts/including testing & commissioning complete as required. The costs shall include crimping tinned heavy duty alluminium lugs, compression glands requisite materials for all cables and to provide with 1D gap & shall be properly clamped with cable clamps & ties. Identification tags shall be provided for all cables including cable end termination.

CONTROL CABLING

Supplying, fixing testing commissioning of Volume control GI Dampers to be provided in Supply / Exhaust air registers / terminals.

Supply, laying, testing and commissioning of control cabling, as per Standard specification including end termination as required.

Power Cabling ( PVC insulated and PVC sheathed, armoured, Copper Conductor of 1.1 KV grade on existing cable trays).

Supplying, installation testing and commissioning of cubical type main MV panel board suitable for 3 phase, 415 volts, 50 Hz and of 25 KA rupturing capacity at 415 volts, fabricated from minimum 2 mm thick and doors of 1.6 mm thick CRCA sheet powder coated through seven tank process facility for prickling and degreasing complete with mountings, interconnections, earthing etc including mechanical and Electrical Inter locking as required.

4 core 16 Sq mm

CABLE TRAYS :

4 core 10 Sq mm

4 core 6 Sq mm

4 core 4 Sq mm

BoQ_Ver3.0

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

PVC Interior Louvers - Providing and fixing single extruded PVC/WPC louvres of approved colour for ceilings, interior wall panelling, etc. The louvers shall have dimensions of 2900mm (length) x 160mm (width) x 24mm (height), with a tolerance of ± 5%. The louvers base and PVC film shall be 100% Manufactured in India. The Wall Thickness Of the Louver should be minimum 2mm while the base wall thickness should be minimum 3mm. The composition shall include virgin polymer with a K value of 58–60 (suspension grade), calcium carbonate, natural fibres (such as wood powder, rice husk, or wheat husk), and non-toxic additives. Having Class A category resistance to spread of flame criteria. Additionally, the louvres must be termite/borer proof, water/moisture proof, and fire-retardant. Make: BLACK COBRA, RAJSHRI, ALEX

WPC Grill - 25mm Thick - Designing, Fabricating, Installing and Fixing in facade elevation factory made 25 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali, CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with properties of being termite/borer proof, water/moisture proof and fire retardant and fixing on M.S (mild steel) frame made of 25 x 25 x 1.5 mm square hollow box section with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In- Charge. (Note: M.S (mild steel) framework and necessary SS fasteners and SS screws shall be paid separately. Make: BLACK COBRA, RELWOOD, ALEX

WPC Laminated Board 18mm - Providing & fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/ soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately) Make: BLACK COBRA, RELWOOD, ALEX

3D Wall Paneling - Supplying and fixing 5mm-thick PVC designer 3D panels in ceiling and wall panelling of approved design by engineer-in-charge PVC material having a minimum density of 650 kg/m3. The panel dimension will be 1220 x 2440 mm. The PVC panel shall be fixed to a 4 x 50 x 2440mm PVC base line to provide a base for the panel and fixed with solvent cement or silicon as per the manufacturer's instructions. PVC board is resistant to the spread of flames in the Class A category with the properties of being termite/borer proof, water/moisture proof, and fire retardant. Make: BLACK COBRA, RAJSHRI, ALEX

Charcoal Wall Panel - Providing and Fixing on any wall / column / Panelling / Cladding / Counter etc., High Quality, Light Weight, Superior Seamless finish, 3D, Decorative, Designer Charcopanels (made with mixture of Charcoal and Polystyrene), suitable for application in interior and Exterior both (Exterior Grade), having minimum thickness 5 mm, in various Designs, Patterns, Finishes, Textures and Colours in required sizes alongwith provision of suitable backing and framing, if required, and providing and fixing required numbers of appropriate highliter light fittings and electrical fixtures etc. as required / specified / recommended by manufacturer to highlight these Panels/Sheets in Panelling / Cladding etc. Cost of backing, framing, lightings and electrical fixtures etc. shall be reimbursed as per respective items and rates quoted by the contractor in the schedule. These Panels/sheets must be maintenance free. Make: Black Cobra, Euro, Rajshri

Aluminium High Pressure Laminated Cladding (AHPL) - Supply and Installation of 6mm thick FR Grade HPL Composite Panel Cladding of approved color, made out of 5.5mm thick FR grade mineral core sandwiched between two aluminium sheets (each 0.25mm thick). The Aluminium HPL Composite Panel Cladding shall be coil coated with High Durable resin coating of approved colour with 10 years exterior warranty and shade on face #1 and polymer (service) coating on face #2. Make: ALEX, Alpolic, Hyundai Alcomax