REPAIR REPLACEMENT OF JOINERY PLASTER FLOORING IN OTM ACCN UNDER AGE B R I OF GE NW NOFRA

Amount

Taking down chowkhat or frame exc 1.5 Sqm but not exc 4 Sqm each without taking off shutter of any discription complete all as specified and directed.

Taking down chowkhat or frame n exc 1.5 Sqm each without taking off shutter of any discription complete all as specified and directed.

Taking down of shutters of any description exc 1 Sqm and n exc 2 sqm each of any description complete all as specified and directed.

Taking down of shutters of any description n exc 1 Sqm each of any description complete all as specified and directed.

S&F of Second class Hard Wood plain solid straight chowkat and framed wrought framed rebated on the soild, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F of 35mm thick second class Hard Wood pannel framed shutter of (any number of panels) with panels of timber flat on both sides (feather edged ) or of veneered particale board medium density, wood particale board with commercial face veneers complete all as specified and directed.

S&F of 35mm thick second class hard wood factory made glazed and skelton shutters open rebated and prepared to receive gauge/glass cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters all as specified and directed by Engr-in-Charge.

S&F in repairs 30mm thick IInd class hard wood glazed and skelton shutters open rebated and prepared to receive glass/gauge cut and metered beads and divided into square with plain chamfered or rounded metered and rebated sash bars any numbers size of members of shutters for windows and ventilator complete all as specified and directed.

S&F of 30mm thick flush shutter (IS), solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete all as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries

S&F of solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.

S&F of Aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed

S&F stainless steel butt hinges of size 100mm complete all as specified and directed.

S&F 75mm size stainless steel, butt hinges type B-22 complete all as specified and directed.

S&F Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed.

S&F extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed.

S&F in repairs 100mm size stainless steel butt hinges complete all as specified and directed.

S&F in repairs 75mm size stainless steel butt hinges complete all as specified and directed.

S&F in repairs Aluminum anodized barrel tower bolt of extruded section 200mm long complete all as specified and directed.

S&F in repairs Aluminium alloy anodised barrel tower bolt 150mm long complete all as specified and directed.

S&F in repairs Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodized 150mm long complete all as specified and directed.

S&F in repairs extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed.

S&F brass, Sliding bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of brass complete all as specified and directed.

S&F in repairs brass, Sliding bolt 250mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of brass complete all as specified and directed.

S&F fancy type brass handles of 150mm size, patterns shall be approved by Engr-in-charge and complete all as specified and directed.

S&F in repairs fancy type brass handles of 150mm size, patterns shall be approved by Engr-in-charge aand complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed.

M&L 6mm thick ply wood, grade BWR, type BB fixed with screws to timber frame work for cupboards complete all as specified and directed. Make :- Green Ply, Kitply, Century

-Ditto- as per item-32.00 above but 12mm thick ply wood.-Ditto- Make :- Green Ply, Kitply, Century

-Ditto- as per item- 32.00 above but 18mm thick ply wood.-Ditto- Make :- Green Ply, Kitply, Century

M&L of 0.9mm thick decorative laminate type 1, of surface finish, colour and pattern as approved, fixed with approved adhesive as per maker's instructions complete all as specified and directed.

S&F of 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished fixed in repairs complete all as specified and directed.

Hacking out old broken glass (any thickness, size,quality or description) from wooden frames glazed with putty or fixed with beads complete all as specified and directed.

S&F of 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and directed. Make of glass sheet : Saint Gobain , Modigaurd , Atul

S&F of 3mm thick one side ground or obscured or frosted glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and directed.

S&F of Aluminium wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by EIC.

S&F in repairs Aluminium wiremesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by EIC.

S&F of Aluminium wire cloth 0.45 mm nominal dia of wire and average width of operature 1.40mm and fixed to aluminium Vent/window complete all as specified and directed Engr-in-charge in repairs. (NOTE : Cost of aluminium beads and neoprene shall be included in relevant item of aluminium window)

Resecuring or easing & adjusting without taking down shutters of any description n.exc 1 sqm each complete as specified and directed by EIC.

Ditto item No 43.00 above but exc 1 sqm and n.exc 2 sqm complete as specified and directed by EIC.

M&L for powder coated Aluminium frame and shutter for sliding windows & ventilators (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels/ shutters to fix glass, PVC gasketting in all channels, locking arrangement, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) complete all as specified and directed. [Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, screws etc as required which shall not be measured for arriving the weight. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel arround contacting surface of aluminium work]

S&F in repairs anodised aluminium door, window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete as specified and directed by EIC.

S&F of Aluminium anodised grill (thickness of anodising minumum 15 micron) with and including suitable aluminium anodized 'F'/ 'H' section frame 23.40 x 15.30 x 1.40 mm thick with aluminium rebated/ screwed attachment complete all as specified and directed in following situation :- (Note : (i) Aluminium grill shall be of 'Deco grill' of M/s ELESAR FOCCHI Ltd as per Design No. DG102, 7.50 mm x 6 mm and weight shall not be less than 3.131 Kg/ Sqm or approved design in M/s Royal Grill/ National Grill/ Alumigrille of M/s Alumi Profiles Pvt. Ltd, Chandramukhi Basement, Nariman point, mumbai.

S&F of aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles and completed all as specified and directed.

S&F of 20mm dia aluminium decorative type powder coated curtain rod or similar articles and completed all as specified and directed by Engineer in charge.

S&F in repairs door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew complete as specified and directed by EIC.

S&F in repairs Hooks & eye 150mm long aluminium Type II complete as specified and directed by EIC.

S&F of 100mm long hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinges plate and fixed screws complete as specified and directed by EIC.

S&F in repairs stainless steel towel rail 20mm dia D type 60cm long between flanges complete as specified and directed by EIC.

S&F of Godrej night latch seven levers suitable for 35mm to 45mm thick doors in repairs complete as specified and directed by EIC.

Taking down cement plaster on brick wall including raking out joints, hacing for key, scrubbing down with water, etc. complete as specified and directed by EIC.

M&L of rendering in cement mortar 1:6, 15mm thick on fair face of brick work and finised even and smooth without using extra cement at any posotion complete as specified and directed by EIC.

M&L for rendering in cement mortar 1:3, 10mm thick on fair faces of brick/concrete surfaces and finished even and smooth without using extra cement on ceiling all as specified and directed.

M&L for preparation of new plastered or unplastered surfaces and apply two coat of oil bound distemper on wall over a coat of primer complete as specified and directed by EIC. Make of OBD : Asian paint Tractor Uno , Berger Bison or its equivalant in nerolac

M & L for preparation of new plastered surface by applying two coats of oil bound distemper over a coat of alkali resistant primer and 3mm thk wall care putty on ceiling etc complete all as specified and directed.

Material and labour for preparing the old decorated surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

Material and labour for preparing the old decorated surfaces of walls and applying two coats of white wash complete all as specified and as directed. Make : Surya Cem , Asian Paint , Nerolac

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed. Make:- synthetic enamel paint :Asian (Apcolite), Berger (Luxol), Nerolac (High Gloss)

All as item No 63.00 above but for one coat only

M&L for preparation of old steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over red oxide primer etc complete all as specified and directed by Engineer- in charge.

M&L for preparation of new steel surfaces of any description and applying two coat of synthetic enamel paint over one coat of red oxide complete all as specified and directed by Engineer- in charge. Make:- synthetic enamel paint :Asian (Apcolite), Berger (Luxol), Nerolac (High Gloss)

M&L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coat of synthetic enamel paint over one coat of primer complete all as specified and directed by Engr-in-charge. Make:- a) Synthetic enamel paint :Asian (Apcolite), Berger (Luxol), Nerolac (High Gloss) b) Primer:- Asian, Berger, Nerolac

S&F of MS framed work as in grills, gratings , etc.. With ends of bars shouldered/welded or riveted or forged into spikes framed guard bars, grills, barred iron doors, ladders, framed balusters, walkways, railings, and similar works confirming to FE 290 Gde E 165 complete as specified and directed by EIC.

Dismantling wrought iron/ mild steel work of any description incl removing from site complete as specified and directed by EIC.

M&L of coloured Digital Glazed Virified Tiles of approved shade of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, laid in floors including cement mortar screed bed of 20mm thk in CM 1:4 set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling all as specified & directed by EIC Make - Somany, Kajaria, Cera, Orientbell (Note - Pattern, Finishing, Shade, Colour as approved by GE)

M&L of coloured Digital Glazed Virified Tiles of approved shade of 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.42 sqm, including over 15mm thick Screed bed or bedding layer in CM 1:6 for Dado / Skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling, complete all as specified and as directed. Make: Somany, Kajaria, Orient bell.

M&L for Non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.06sqm but not exceeding 0.11 sqm over & including 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make: Somany, Kajaria, Orient bell.

M&L for Glazed ceramic tiles in vertical surfaces of size 450x300mmx7mm thick including over 10mm thick Screed bed or bedding layer in CM 1:4 for laying tile finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge Make: Somany, Kajaria, Orient bell.

M&L for Polished granite stone slab 16 to 18mm thick coloured as in cooking platform/door sills , set and jointed with grey cement slurry and pointed in neat white cement slurry mixed with pigment to match the shade of floors, including moulding at front edge or both edges including dismantling complete all as specified and as directed by EIC. Note : Quality of granite all as approved by GE

M&L for Marble Baroda green 18 to 20 mm thick (table rubbed and polishing) as in skirting/dado/ window cills/ jambs, vertical surface over cement rendering and jointed with grey cement,over and including screed bed of 15mm thick in CM 1:4,including pointing in white cement (1:2)using marble dust with admixture of pigment to match with the shade of marble and making nosing at right angle corner including dismantling complete as specified and directed by EIC.

M&L for 100 mm thick cement concret type C-2 1 : 3 : 6 ( 40 mm gaded aggregate as in floor repairs, sub base similar work ,including demolition complete all as specified and directed.

M&L for plain cement concrete colour interlocking tiles 80 mm thick having (colour and pattern approved by GE) strength not less than 350 Kg/Sq CM laid over and including 50 mm thick dry sand cushioning and void filled with dry and compact, including compation by means of surface vibrator, including dismantling complete all as specified and directed by Engineer-in-Charge.

S&F in repairs PVC cabinet mirror of size 300 x 450 mm complete all as specified and directed. Make : Prayag cat no. 551 or its equivalent in Polytuff/ Modifloat.

S&F in repair decorative corner glass self round 6mm thick,300mm size with stainless steel railing high in bathroom, fixed with D type bracket on wall of approved and pattern complete all as specified and directed.

Supply and fixing of UPVC windows two track, fixed type in any position with 6mm thick toughened glass of approved make (glass tint as approved by GE) incl all necessary fittings and fixtures and complete all as specified and as directed by the Engineer-in-Charge Make: Finesta, Lingel, Adopen , Madhu

Supply and fixing of UPVC windows two/three track, sliding/movable type in any position with 6mm thick toughened glass of approved make (glass tint as approved by GE) incl all necessary fittings and fixtures and complete all as specified and as directed by the Engineer-in-Charge Make: Finesta, Lingel, Adopen , Madhu

BOB ENTERPRISES

SR Construction

SAI SERVICE