CA NO CWE/PAT/T-04/2020-21 SPECIAL REPAIR TO A VEH GARRAGE BLDG NO P-25 and P-26 AND TR HUT NO 06 and 07 OF CERTAIN UNITS UNDER GE NORTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

S&F Pre-painted factory made galvalume aluminum zinc coating GI based plain sheet 0.45mm thick TCT of colour as approved as in gutters with 195mm high vertical sides and 220mm wide bottom having tensile strength of 550 Mpa for roof covering, including supply and fixing with all accessories all as recommended by manufacturers like fasteners/screws/brackets etc complete all as specified. Make : Tata Durashine or equivalent as approved

Supply only integral liquid water proofing compound all as specified & as directed by Engineer-in-Charge.

Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projection etc with mechanical means/grinder complete all as specified and directed.

M&L for applying acrylic thick wall care putty on internal/external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using ready made wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.

Applying 02 coats of interior emulsion paint (light shade) @ 12 sq.m/litre/2 coats by using roller to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of interior emulsion paint (white shade) @ 12 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using following brands of emulsion and primer complete all as specified and directed.

S&F spray Duco painted pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 125x60mm complete all as specified and directed.

S&F factory made flush door shutter 35mm thick, ISI marked conforming to IS : 2202 (part-I) non -decorative type, core of block board construction with frame of 1st class hard wood & well matched commercal 3 ply veneering with vertical grains or cross band & face veneers on both faces of shutters.including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 Nos per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 Nos per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.22mm) and including painting with one coat of pink primer and two coats of synthetic enamel paint and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 4 nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 nos per leaf (e) 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate - 1 nos per leaf

S&F powder coated 50 microns extruded aluminium doors & shutters made out of section 63.5 x 38.10 x 1.29mm for chowkats or frame & shutters made of size 44.45 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) above and below middle/lock rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed including supply and fixing the following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 3 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 Nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 Nos per leaf (d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F powder coated aluminium glazing/ doors & shutters made out of aluminium anodised section 101.60x44.75x1.75mm for chowkats or frame & shutters made of size 81.25x38.10x1.50mm for side rails, top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below middle/lock rail and 5mm thick frosted glass above the mddle rail, and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including required nos. of pivots/hinges andbrass mortice lock (four lever) and two Nos keys complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) Stainless Steel 304 Grade Finished Butt Hinges 150mm - 4 nos per leaf (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf (d) Alm door closer hydraulically regulated, designated No 3 universal type, upto 1 m width of shutter - 01 No per leaf

S&F factory made extruded aluminium windows with 50 micron powder coating doubled panelled and double shutters consisting of frame and mullion of 101.60X44.45X1.29 mm and shutters made of 63.5X31.75X1.29mm and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and including 5mm thick glass in front shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperature in inner shutters incl S&F factory made aluminium 50 micron powder coated grill, opening size 101.6X63.5 mm (4"X2½") and weight not less than 1.345 Kg/sq.m complete fixed in all respect as specified including supply and fixing following items :- (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm - 2 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 150mm long - 2 nos per leaf. (c) Powder Coated Aluminium Handles 150 mm - 1 nos per leaf. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

S&F factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 65% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 35% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified. Make (Aluminium Sections) : Jindal/Valco/Galco/Hindalco or equivalent as approved by AO

Taking down aluminium chowkhats or frames shutter of any size and refixing the same after resecuring or easing & adjusting and repairing the existing aluminium door frame and shutter such as aluminium frame parts if any reqd, broken glass of shutter and incl S&F of EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed. Note : Glass will be measured and paid seprately, if any reqd.

M&L for single charge, vitrified, stain & scratch resistant, joint free, Premium (1st) quality straight edge light coloured tiles 600 X 600 mm and 9-10 mm thick, as in floors etc. in any pattern as approved, set and jointed adhesive and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed bed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L for single charge, vitrified, stain & scratch resistant, joint free, Premium (1st) quality straight edge light coloured tiles of size 600 X 600 mm and 9-10 mm thick in any pattern as approved, on vertical surfaces such as in skirting/dado etc, length of each unit not less than 600 mm and height not more than 150mm, set and jointed adhesive over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Skirting should be flushed with the wall plastering.

M&L for Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Note : Dado should be flushed with the wall plastering. Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO

M&L for Premium (1st) quality rectangle tile, anti-skid ceramic joint free coloured tiles 300 X 300 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed bed in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified. Make : Johnson (Digital HD Tiles) (Barstow or Sobaro Deep) or equivalent from Kajaria/Somany as approved by AO

Taking down of existing of aluminium partition wall of any size and refixing the same after resecuring or easing & adjusting and repairing the existing aluminium frame of wall such as aluminium frame, broken glass and incl S&F of EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size complete all as specified and directed. Note : Glass will be measured and paid seprately, if any reqd.

M&L for Baroda Green marble, machine cut as in shelves/steps/cills/jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the front length, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type granite polishing complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

M&L for 22mm thick precast plain cement concrete tiles type B-1, 1:2:4 (12.5mm graded aggregate) as in floorings, roofing set in cement mortar 1:4 over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairing, cleaning, etc. and hoisting if required reconnecting and S&F tank cover and 20mm dia brass float valve, changing of chuk nuts, socket and re-fixing in position after cleaning the tank complete all as specified and directed.

S&F vitreous china premium/1st quality wash down water closet wall hung EWC P trap white/ivory/off white including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe CP 32mm dia and incl. plastic seat cover as recommended by manufacturer closed pattern with matching colour flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, incl 100mm dia cast iron sanitary connections—short connections pipe of length upto 600 mm and Cutting holes in or through walls, packing with PCC 1 : 2 :4 complete and taking down existing of any description/size complete in all respect all as specified. Make : Cera (EWC-Compact, Seat Cover-Carona) or equivalent from Parryware/Hindware as approved by AO

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams, ceilings and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including cutting grooves in brick /concrete wall and preparation of surfaces to receive finishes complete all as specified and directed.

S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified. Make : Hindware (WHB-Garnet (Cat No.- 10080), Waste Coupling-Cat No.- F850023 (Economy Model), Bottle Trap-Cat No.- F850072 (Economy Model) or equivalent from Parryware/Cera as approved by AO. Note : The items for counter will be measured and paid separately.

S&F concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories etc as recommended by manufacturer for fixing, packing and including S&F of actuator knob/flush plates and making space/cavity in existing brick work wall for fixing and taking down existing of any description/size complete in all respect all as specified and directed. Make : Hindware (Concealed Cistern-Cento, Flush Plate-Cento) / Cera (Concealed Cistern-Chevron Cat No. - B1110101, Flush Plate-Cat No. B1120101-H Type)

S&F health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. Make : Hindware (Cat No. - F160013) or equivalent from Parryware/Cera as approved by AO

S&F 6mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws etc. chrome finish with smooth finish edges/sides complete fixed in position all as specified and directed.

S/F for Vitreous Chinapremium/1quality Urinal white colour, of size 330 x 300 x 450 mm incl suply and fixing plugs/brackets, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including S&F of all accessoories for fixing as recommended by manufacturer like 60mm long brass screws/fasteners/rag bolts etc, pointing urinal back in white cement, connecting for discharge pipe incl necessary packing, union complete and incl S&F CP urinal spreader and push button/cock complete all as specified and directed. Make : Hindware (Cat No60022) or equipvalent from Pariware/Cera/Jaquar as approved by AO.

Supply only 5.5 mm thick glass for shutter and partition wall complete all as specified and directed.

M&L for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

M&L for preparing new plastered surfaces of Internal walls and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge.

Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glazed and gauged skelton shutters jointed internally with flat iron 40x4mm complete including grill of 12mm square bar, fixed horizontally @ 10cm centre to centre, hinges, handle tower bolts, lugs etc all as shown on drawing noTD-219(c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete all as specified and directed. Note;- (i) For the purpose of measurement & payment double shutter with frame shall be considered as one unit. (ii) Glazing , wire mesh and painting, shall be measured and paid for separately

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position in repairs complete in all respect all as specified.

S&F towel track CP 600mm long with lower hanger /hook complete fixed in position complete all as specified. Make : Jaquar CAT Part No AHS-1581H or equivalent from Marc/Cera as approved by AO

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified. Make : Jaquar (CON-CHR-059KN) or equivalent from Marc/Cera as approved by AO

S&F stainless steel grating 150 x 150 mm size square shaped with cockroach trap for floor trap fixed in position complete all as specified .

S&F chromium plated soap dish fixed to wall with drilling screws complete. Make - Jaguar, Code- CAN-CHR-1131N.

S&F fancy type, chromium plated long body bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete. Make - Jaguar Cat Part No QQT 7037.

M&L for toilet paper holder with flat recessed type stainless steel Coomplete all as specified and directed. Make - Jaguar Cat Part No AHS-1553.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling/round strainer of 110mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mmx458mm with bowl size 410x 355x185mm/430x355x200 and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed in repairs all as specfied and directed.

S&F Pillar taps long neck with 450mm long braided hose, fancy type 15 mm dia cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed in repairs complete in all respect all as specified and directed.

S&F overhead shower 70mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete in all respect all as specified.

S&F stainless steel tubing of 25 mm dia mild steel chromium plated 1.6 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets fency type, stops, fency type finials etc all as specified & directed as in repair . (For the purpose of mesurement and payment running length of curtain rod only shall be considered.)

PVC(HDPE) SWR, 40 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, incl reducer, socket, bends, TEE etc. and laid in walls/floor for connecting bottle traps complete all as specified.

M&L for Stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples or with wooden beads, stainless steel screws and nuts botls etc. all as specified and directed.

M&L for 20- 22 mm thick Pre cast plain cement concrete type B-1, 1:2:4 (12.5mm graded agg) as in floorings, roofing set in CM 1:4 over & incl 15mm tk screed bed in CM 1:4 complete all as specified.

S&F 18 mm thick LEAD FREE PVC Celuka ply as in frames of size 75X40mm of both side plain of approved color other than white colour fixed with screws, solvent cement/ adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

Dismantling of steel rolling shutter of any guage including steel hood & guide channels complete geur box etc. complete all as specified and directed.

S&F butt hinges of size 75mm of stainless steel 202 Grade finished/of outer plate metal complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength in longitudinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified.

S&F bulk head fitting LED type including 1 x7 watt LED lamp, with flexible wire 0.5 sqmm copper cable all as specified and directed.

S&F for tube light fittings, LED type retrofit T-8 20 Watt 4 feet long incl LED tube rod and incl 3 core flexible wire 0.5 Sqmm copper cable all as specified & directed, Make- Philips/Havells/CG

S&F sheet metal enclosure for DB's when MCBs to be used double door type Three phase and neutral 4 way 200 Amps rated busbar 415 Volts capacity, drilling holes for incoming and outgoing cables complete all as specified and directed including taking down the existing one Havells/ Legrand/ siemans

S&F MCCB, 4 Pole 415 volts 100 amps 16 KA rupturing capacity for fixing in DBs of including proper thimble connection complete in all respect all as specified.

Refixing of MCB of capacity 6 to 32 Amps SP complete all as specified and directed.

Refixing of MCB of capacity 6 to 32 Amps SPN complete all as specified and directed.

M&L earthing with galvanised steel plate earth electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel with protection of GI, medium grade 15mm bore upto adequate length watering pipe 20mm bore GI common solt 15cm thick all as per electrical plate No 5SSR Part-I and connected to earting test point all as specified or indicated and testing on completion including PCC 1:3:6 type C-2 using 40mm graded stone aggregate CI cover and frame including all excavation and earth work etc all as specified and directed.

(a) S&F false ceiling of 12.5mm th gypsum board over and including concealed grid system complete fixed in all respect and all as per manufacturer's instructions in one/two/three levels and making recess for light fittings as per pattern/design approved by AO and including supply and fixing of items all as specified as below :- Note : The complete item shall be got executed through the authorised applicator of manufacturer only all as specified and directed. Make : Gyproc (b) S&F Suspended Plain Ceiling includes Perimeter Channel {Material-GI(IS513),YS-260Mpa, Finish- Galvanised 150GSM(IS27 )} is fixed along the perimeter of existing wall/ partition with the help of HILTI HPS - 1 (6x40) impact anchor, at 600mm centres. Make : Gypserra™ (c) S&F Ceiling Angle {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is suspended by fixing it to the Gyproc® soffit cleat {GI(IS513)YS-260Mpa,Finish-Galvanised 150GSM(IS277) }. Soffit Cleat and Gyproc® Rawl Plug- Ø8x45mm {Material-IS 513 CR2 grade, Zinc coating (7 to 8 microns) pull out load- 6.8kN for M30 concrete grade} creating 1220mm x 1220mm grid. Make : Gypserra™ (d) S&F Intermediate channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277) } is fixed to the Ceiling Angle with M6 x 12mm Hex Bolt & Hex Nut arrangement {Material–As per EN 10083 Finish – Zinc Plating} or with 2 Nos of Ø4.2x13 Gyproc® metal to metal screw {Material-Carbon steel EN-ISO 7049/50 Finish- Zinc Coating Thickness- 4.14micron.} Make : Gypserra™

(e) S&F Ceiling Section {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} is then fixed to the Intermediate Channel {Material-GI(IS513),YS-260Mpa,Finish-Galvanised 150GSM(IS277)} with the help of Gyproc® Connecting Clip {Material-High carbon spring steel wire(BS970Gr.En42)-46-48HRC,Finish- Zinc plating 4-6 micron} and in direction perpendicular to the Intermediate channel at 457mm c/c. Make : Gypserra™ (f) S&F Single layer of 12.5mm tapered edge Plain (conforming to IS 2095-Part 1:2011, ISI Certified board) is then screw fixed to ceiling section with 25mm drywall screws {Material-Carbon steel EN-ISO 7049/50,Finish-Case hardened Grey Phosphating} at 230mm centres on ceiling section & 150mm at periphery of ceiling. Make : Gypboard® (g) Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Pro-Fill Jointing compound (Conforms to ASTM C475), Gyproc® Joint Paper tape. Make : Gyproc®

DELTA CONSTRUCTION CO

Arneja Builders

Buttar Construction Co.

M/S RAJ KUMAR GUPTA

M/s Amit Associates

Swami Engineers