Certain Special Repairs and LBW works for E/M services at Mil Stn Beas under GE Kapurthala.

Amount

Excavation in trenches in hard/dense soil not exceeding 1.5m wide and not exceeding 1.5 metre in depth for laying of cable and not exceeding 10 Sqm on plan for poles, struts, stays etc. and not exceeding 1.5 m in depth and getting out complete all as specified and directed by Engr-in-Charge.

Returning, filling in, trenches including spreading leveling, watering and well ramming in layers not exc 25 cm complete all as specified and directed by Engr-in-Charge.

Removing excavated material to a distance not exc 50 mtrs and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and directed by Engr-in-Charge.

M&L for cushioning for protection of cable using dry river sand, free from particles complete all as specified and directed by Engr-in-Charge.

M&L for Protection to cable with one layer of new bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks complete all as specified and directed by Engr-in-Charge.

Supply and laying un-reinforced precast concrete cable cover class HV Type-1, flat size 3000mm x 180mmx 40mm thick.

Dismantling of existing old ACSR conductors, any size, from existing LT poles at area where UG cables are to be laid, by unwinding the binding wire from insulators including disconnecting from the existing system, keep in safe custody for reuse, complete all as specified and directed by Engr-in-Charge. Note : (a) Payment for taking down of insulators shall be made for separately.

Dismantling of existing old cross arms etc made of mild steel channel, angle iron, flat iron, back plates, nuts, bolts, washers etc complete all as specified and directed by Engr-in-Charge.

Dismantling/taking down of insulators of any type/size from LT poles complete all as specified and directed by Engr-in-Charge.

Supply and laying in trenches/through pipes or bare in road crossings/paths/drains/ducts/floors/along poles/walls/ ceilings/ equipments etc. Cable Under ground, Heavy duty, armoured, XLPE insulated with stranded aluminium conductor, 1100 Volts grade of following cross sectional area complete all as specified and directed by Engr-in-Charge.

(a) 120 Sqmm 3.5 core

(b) 95 Sqmm 3.5 core

(c 35 Sqmm 3.5 core

(d) 25 Sqmm 4 core

(e) 16 Sqmm 4 core

(f) 25 Sqmm 2 core

(g) 10 Sqmm 2 core

M&L for making joint using out door cable straight through jointing kit (Epoxy/Heat Shrinkable type) suitable for PVC/XLPE under ground aluminium conductor cable, 1100 Volts grade including crimping aluminium socketes of suitable size complete of following cross ectional area complete all as specified and directed by Engr-in-Charge:-

(a) 16 to 35 Sqmm 3.5/4 core

(b) 95 to 120 Sqmm 3.5 core

M&L for cutting the existing hard standing/PCC/WBM road at a depth not less than 45 cm and 25 cm in width for passing of cable through GI pipe, returning filling in, complete including finishing the surfaces by providing cement concrete type B-1 (1:2:4) with 20 mm graded aggregate upto 20 cm, finishing to a uniform smooth surface complete all as specified and directed by Engr-in-Charge.

Supply and lay in trenches/under roads/crossings are fixed to wall/pole, GI tubing light grade of following sizes for protection of UG cables complete all as specified and directed by Engr-in-Charge:- Note : Payment for excavation and earth work shall be paid for separately under relevant items of Schedule.

(a) 100 mm dia

(b) 80 mm dia

(c) 50 mm dia

S & F Sintex make PVC looping box comprising of 04 Nos Aluminimum bus bar mounted on insulator and one No 6 Amps SP MCB and connecting terminals 4 way including necessary Clamps made out of MS flat iron, nuts and bolts suitable for fixing with steel tubular Poles complete all as specified and directed by Engr-in-Charge.

M & L for wiring for Circuit from MCB box to Street light including supply and fixing (with suitable clamp) of pvc conduit of size 20 mm dia on pole with FR PVC insulated copper conductor single core cable with 2 x 1.5 sqmm + 1 x 1 Sqmm earth wire in surfaces/recessed as required complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable any type S/Light fitting and Supply and fixing LED street light fitting 45 Watt IP65 Powder coated pressure die cast aluminium compact LED security light/Street light with heat resistant toughened glass including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on Pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers complete all as specified and directed by Engr-in-Charge.

Supply and fix LT feeder pillar box with TPN Bus bar( Alluminium) of rating 600 Amps totally enclosed floor mounted outdoor type weather and vermin proof made out of MS sheet 3 mm thick duly painted with 2 coats of enamel paint over a coat of red oxide primer consisting of the following items :- (a) MCCB 4 Pole, 415 V, Adjustable type,400 Amps with breaking capacity 36 KA- 01 No ( In Coming). (b) MCCB 4 Pole, 415 V, Adjustable type, 250 Amps with breaking capacity 36 KA- 03 No (out Going). (c) MCCB 4 Pole, 415 V, Adjustable type,200 Amps with breaking capacity 36 KA- 03 Nos ( Out going). (d) Digital Volt Meter 0-500V - 01 No. (e) Digital Ampere Meter 0-400 A with 3 Nos of CTs (f) Indicator LED type

Supply and fix LT feeder pillar box with TPN Bus bar( Alluminium) of rating 350 Amps totally enclosed floor mounted outdoor type weather and vermin proof made out of MS sheet 3 mm thick duly painted with 2 coats of enamel paint over a coat of red oxide primer consisting of the following items :- (a) MCCB 4 Pole, 415 V, Adjustable type,250 Amps with breaking capacity 36 KA- 01 No ( In Coming). (b) MCCB 4 Pole, 415 V, Adjustable type, 100 Amps with breaking capacity 36 KA- 07 No (out Going). (c) MCCB 4 Pole, 415 V, ,63 Amps with breaking capacity 25 KA- 01 Nos ( Out going). ( d) Power contactor 40 Amps. (e) Micro Rex Aanalog time switches T31. (f) Voltmeter 0-500 volts. (g) Ammetor 0-250amps with CTs. (h) Indicator lamps.

S&F steel tubular swaged poles type 410SP-31(9.0 meter long) complete with CI base plate and finial taper plug, bolts, nuts & screws all complete all as specified and directed by Engr-in-Charge.

M&L for PCC 1:4:8 type D2 (using 40 mm graded stone aggregates) as in foundation bed and around the pole as mass concrete including necessary form work and finishing the exposed surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

All as per description of seiral item No 19 here-in-before but PCC (1:2:4) type B-1 using 20 mm graded stone aggregates as in coping of poles complete all as specified and directed by Engr-in-Charge.

M & L for earthing complete with GI or steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level covered on all sides with alternative layers of charcol dust and common salt 15 cm thick connected to galvanised earth lead Galvanised Iron strip 32 x 6 cm by means of bolts, nuts, check nuts and washers of Galvanised Iron or steel with protection pipe earth wire protected by galvanized steel pipe light grade 40 mm bore from top of the earth plate electrode upto test point and watering pipe 20mm bore, GI light grade with funnel and wire mesh all as shawn in electrical plate No 3 of SSR Part-1 and connected to earthing test point all as specified or indiated and testing on completion, including PCC earth pit (1:3:6) type C-2 RCC covered with CI cover hinged with frame including excavation and earth work complete all as specified.

Taking down carefully aluminium point wiring on casing caping/through conduit (light fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, box type tube light fittings, removing the materials from site except fittings etc which shall be reused in the work and making good the disturbed surfaces of walls/ceiling/ floors etc complete all as specified and as directed by Engineer-in-Charge

M & L for point wiring for one light or one fan point controlled by one switch or with one switch and regulator with PVC unsheathed single core multistranded copper conductor (FRLS) cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm bore by cutting chases in wall by cutter and making good the surface in cm 1:3 and to the original specification and cast iron /pressed steel concealed terminal boxes including providing 3mm thick plastic laminated sheet cover (Hylem) including one run of PVC insulated copper conductor (FRLS) cable of size 1.5 sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/Socket outlet to be measured & paid for separately).

All as per Srl item No 24 here in before but for 3 pin socket outlet 5 Amps on same board .

All as per ser item 24 above but for 3 pin socket out let 5 Amps on independent board

All as per srl item No 24 here in before but for 3 pin socket outlet 15 Amps on independent board with PVC unsheathed copper conductor cable of size 2.50 Sqmm including copper earth wire of size 1.50 Sqmm and connected to common earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/socket to be measured & paid for separately)

Supply & fixing switch piano flush type 5 Amp single pole one way.

Supply & fixing switch piano flush type 15 Amp single pole one way.

Supply & fixing socket outlet 5 pin 5 Amps flush type multipurpose.

Supply & fixing socket outlet multipurpose 2 in one, 3 pin 5/15Amps flush type.

Supply & fixing ceiling rose surface bakelite 65 x 50mm three terminal complete all as specified and directed by Engr-in-Charge.

Supply & fixing fan regulator electronic step type and making connections.

Supply & fixing Angular lamp holder insulated body with back plate suitable for batten fittings including 1 x 9 W LED Lamp complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable FTL fitting 36/40Watt and S & F surface mounting energy saving LED tube light fitting, 1x22W, 230V , high efficiency PMMA diffuser gives soft glare free light with LED tube rode 20 W (White) complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of exhaust fan, steel body AC single Phase. 230V of size 450m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in-Charge.

Taking down old unserviceable ceiling fan and Supply & fix in replacement of ceiling fan 1200 mm sweep, 240 Volts Colour- Opal White Make- Havells / Crompton /Orient, and connecting up including provision of flexible copper conductor cable from ceiling rose / connector to fan and GI pipe/ steel rod, nuts, bolts, clamps etc as required at site complete all as specified and directed by Engr-in-Charge. Note :- deposit old unsv ceiling fans to MES Store and will be taken on ledger charge as salvage.

Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated.

Supply and fixing PVC connection cold water pipe 18" long, 15mm dia with brass jem nut and wahser, both side complete all as specified and directed by Engr-in-Charge.

All as per ser item No 40 here in before but hot water pipe made of chromium plated brass flexible tubing complete all as specified and directed by Engr-in-Charge.

Supply and fixing stop cock brass of size 15 mm dia Make- Sant/ Zoloto

Supply and fixing bib cock brass of size 15 mm dia Make- Sant/ Zoloto

Supply, laying, fixing GI pipe medium class 15 mm dia including all fittings like elbow/union etc, by cutting wall and connecting on existing 15/20mm dia GI pipe complete with all accessories clamps, nut bolts etc all as specified and directed.

Supply and fixing MCB single pole 6 to 32 Amps 240 Volts.

Supply and fixing MCB 40 Amp SPN 240 volt, complete all as specified and directed by Engr-in-Charge.

S&F metal clad switch socket single pole and earth encolsure with two pin and earth plug with socket complete with on SPN 20 Amps, 230 Volts MCB.

Supply & fixing sheet metal enclosures with double door, detachable gland plates flush/ mounting for MCB’s fitted with bus bar, earth wire and neutral link,SPN 12 ways, 240 volts complete all as specified and directed by Engr-in-Charge.

S&F TPN 4 Way Vertical type Distribution Box (VTPN DB) in double door,IP -54, suitable for flush mounting and surface mounting with 250 A copper bus bar for each Ph ,two neutral bar, two Earthbar with provn for MCCB 100 A as Incomer (W/O MCCBs)and SP /TP as out going complete all as specified and directed by Engr-in-Charge.

Supply and fixing MCCB 100 Amp 4P 415 volt, complete all as specified and directed by Engr-in-Charge.

M&L of earthing complete with galvanized steel earth plate trode 60cm x 60cm x 6mm thick buried directly in ground vertically in a pit not less than 2.25 meter below ground level with top edge of earth plate at a depth not less than 1.5 meter below level connected to GI earth wire 4mm dia by means of bolts, nuts and washers (earth plate covered with charcoal dust and common salt in alternate layers) GI earth wire protected by galvanized steel pipe light grade of 15 mm dia upto switch board and connected to main switch board, including provision of 20mm dia GI tubing light grade watering pipe with funnel and wire mesh PCC earth pit (1:3:6) type C-1 covered with CI cover hinged with frame including excavation and earth work complete all as specified and shown in electrical plate No 5 of SSR Part I including testing on completion complete all as specified and directed by Engr-in-Charge.

Disconnecting and taking out old u/s cable of service connection / sub main of any size and type from pole to DB's / Main switch complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED bldg security light fitting 35 watt Powder coated pressure die cast aluminium compact LED security light including 1.5 mtr long 40 mm bore GI pipe mounting bracket made to shape for fixing on wall with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers all as specified and directed by Engineer-in-Charge.Make- Crompton, Product Code -LSTS-20-CDL-M or equivalent in Bajaj/Philips/Polycab /Havells: Contractor shall provide 1 years written manufactures warranty for the LED fixture complete including driver from the certified date of completion complete all as specified and directed by Engr-in-Charge.

M & L for point wiring for one light or one fan point controlled by one switch or with one switch and regulator with PVC unsheathed single core multistranded copper conductor (FRLS) cable of size 1.5 Sqmm (nominal area) in and including PVC conduit 20 mm bore by cutting chases in wall by cutter and making good the surface in cm 1:3 and to the original specification and cast iron /pressed steel concealed terminal boxes and including covered with modular plates with cover and one run of PVC insulated copper conductor (FRLS) cable of size 1.5 sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed by Engr-in-Charge. (Switch/Socket outlet to be measured & paid for separately).

All as per item No. 54 here in before but for One 3 pin socket out 5 amp on the same board

All as per item No.54 here in before but one 3 pin socket outlet 5 Amps on independent board

All as per Sl No 54 above but Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently

S&F modular switch 6 Amps 240 volts single pole one way.

S&Fmodular switch 16 Amps 240 volts single pole one way.

S&F modular socket outlet multipurpose 2/3 pin 6 amps flush button type.

All as per item No 60 above herein before but 2 in 1. 6 and 16 Amps.

S&F PVC rectangular/square block 75cmx750cmx35mm complete all as specified and directed by Engr-in-Charge.

Supply and fixing round shape LED fixture 12 watt 220 volts AC, recess mounted pressure die-cast aluminium luminaire in powder coated white finish with drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver complete , suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing round shape LED fixture 15 watt 220 volts AC, recess mounted pressure die-cast aluminium luminaire in powder coated white finish with drop down PC diffuser with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver complete , suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED lights fitting , 220V, AC ,decorative wall light, stainless steel, rust free fixture with white glass diffuser suitable for 9 Watt LEDfilament lamp E27 base, with driver, holder including LED lamp and connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed by Engr-in-Charge.

Supply & fix in replacement of ceiling fan 1200 mm sweep, 240 Volts , Energy Saving Model ( 5 Star Rating) Colour- Metallic White Make- Havells, Model :Efficiencia (BLDC-32 W) or equivalent in Crmoptons/Orient, and connecting up including provision of flexible copper conductor cable from ceiling rose / connector to fan and GI pipe/ steel rod, nuts, bolts, clamps etc as required at site complete all as specified and directed by Engr-in-Charge.

S&F electronic modular fan regulator 230 volts, step type socket type, hum free 100/300 watt complete all as specified and directed by Engr-in-Charge.

Sub main wiring with PVC insulated unsheathed 1100 volts grade multi stranded copper conductor FRLS cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC conduit on concealed and all accessories fixed to wall/floors along with 2.5 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly. Note: 2 runs of 4 sqmm cable along with one run of 4 sqmm cable for earth conductor shall be measured as one length.

Sub main wiring with PVC insulated unsheathed 1100 volts grade multi stranded copper conductor cable 2 runs of 6 sqmm drawn through in and incl suitable size PVC conduit on concealed and all accessories fixed to wall/floors along with 4 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly. Note: 2 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor shall be measured as one length.

Sub main wiring with PVC insulated unsheathed 1100 volts grade multi stranded copper conductor cable 2 runs of 10 sqmm drawn through in and incl suitable size PVC conduit on concealed and all accessories fixed to wall/floors along with 6 sqmm PVC insulated unsheathed copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly. Note: 2 runs of 10 sqmm cable along with one run of 10 sqmm cable for earth conductor shall be measured as one length.

Disconnecting in coming HT and out going LT cable connections and taking down Transformer of any type/size/make/capacity from 2/4 Pole structure or from floor/pedestal and shifting to MES store yard for depositing or shifted to new location with in 3 KM and install where directed, refixing HT/LT cable connections complete all as directed.

Supply, install, test and commissioning copper wound step down transformer , out door type complete with standard fittings, HT, 11 KV, 3 Phase, LT , 433 Volts, 3 phase 4 wire with off load tapings on Primary side to vary secondary voltage + 7.5% with tapings at every 2.5% rating of capacity 250 KVA (BIS Level 3) (1180:2014) including bushing on HT side and LT side all as per IS 2026 complete all as specified and directed compring following :- Note : This items includes the following (a) Three Nos porcelain bushings HT 11 KV with brass bushings rods nuts and washer inside cable end box. (b) One cable box LV side consisting of four nos porcelain with brass bushing rods complete with nuts and washers with two nos cable gland suitable for 3.5 core 400 Sqmm LT U/G Cable . (c) Oil conservator with filler type drain valve and oil level guage with transformer oil. (d) Dehydrating breather with first fill of dehydrating agent. (e) Pressure relief explosion vent with diaphragm. (f) Thermometer pocket on tank cover. (g) Rating & diagram plate and terminal marking plate. (h) The earthing terminal two Nos to facilitate fixing of earth strip

(j) Oil filling hole with cap/plug with connection plate complete. (k) Air relief valve plug. (l) Drain cum sampling valve- 01 Nos. (m) Filter valv with plug. (n) Under base skid with flat uni-directional rollers. (o) Neutral terminal brought out on Bare Porcelain separately, earthing terminals- 02 Nos (p) Buchholz relay, winding temprature indicator, oil temprature indicator, marshalling box (q) Contractor will take Pre order sample approval from authorised rep of Accepting officer and arrange visit of company rep to give presentation to Engr in Charge before placing order. (r) The contractor will produce purchase voucher of company, test certificate,mannual of the transformer and also arrange predispatch inspection (factory visit) of transformer by Engr in Charge or any authorised rep of accepting office. (s) Initial filling to transformer oil with required capacity

Supply and fixing lighting arrester metal oxide non-linear type rupturing capacity 65 Kilo Amps porcelain conforming to IS-3070 Pt-I suitable for 11 KV, HT overhead line complete including nuts, bolts, clamps, bracket etc and connecting with GI earth wire, discharge capacity 65 Kilo Amps including taking out inserviceable lightning arrester complete all as specified and directed by Engr-in-Charge.

Supply and install tripple pole HT 11 KV outdoor gang operated air break switch of rating upto 200 Amps with fixed contacts of phosphorus bronze and moving contacts of copper with mechanically operating from ground level vertical mounted complete with HT insulator on steel frame operating rode made out of 25 mm GI pipe medium grade worked from ground level with handle and locking arrangement with 12 insulators with dropout fuses fixed including taking out existing GO switch complete all as specified and directed by Engr-in-Charge.(clamps/cross arms shall be measred and paid for seperatly.

S&F cable route indicator made of 15 x 15 x 6mm thick MS plate welded with 10mm x 30cm long MS rod grouted in PCC block of size 0.2 x 0.2 x 0.3 m and writing HT cable complete all as specified and directed by Engr-in-Charge.

M& L for MS supports, clamps , any type anti climbing device fabricated from structural steel sections in any shape or size bending hot or cold and drilling holes for bolts back plates, nut, bolt, washers etc including painting with 2 coats of alumunium paint after a coat of primer complete all as specified and directed by Engr-in-Charge. including taking out existing one.

Supply & fix GI strip 32 mm x 6 mm buried in ground complete all as specified and directed by Engr-in-Charge.

Supply and laying in trenches/through pipes or bare in road crossings/ paths/drains/ducts/floors/along poles/equipments etc. Cable Under ground, cross linked poly-ethylene (XLPE) insulated, screened, PVC bedded, galvanised steel strip armoured, electric power cables with aluminium conductor, unearthed,11KV/11 KV grade, of cross sectional area 120 Sqmm, 3 core laid complete all as specified and directed by Engr-in-Charge.

Supply and fix cable jointing kit for 11 KV grade cable for outdoor termination , heat shrink type, joint complete with jointing material and accessories suitable for 3 core XLPE, armoured, Al conductor cable of size 120 Sqmm.

Taking down existing old unsv LT panel and supply, fabricating, installation, commissioning, testing and electrically connected CPRI approved manufacturer LT panel out door cubical type, Double door, made of 3.15 mm thick CRCA sheet steel on angle iron frame 50mm x 50mm x 6 mm of size 1.5m x1.5 m x.0.50 m with removable hinged doors on both side, locking arrangement, vermin proof, painted with 2 coats of synthetic enamel paint over a coat of red oxide (internal& external surface) with heat shrinkable sleeves on Copper bus bar 600 Amp capacity - 04 Nos for distribution, complete wiring with thimbles and other accessories using crimping tool including foundation for fixing over PCC (1:2:4) type B-1 using 20mm graded stone aggregate foundation complete all as specified and directed by Engr in Charge comprising the following :- Incoming:- (i) MCCB 4 pole, 415 volts Adjustable type,400 Amps, 36KA ,50 C/S with spreader link - 01 Nos Make : Schneider/L&T/Legrand. Outgoing:- (i) MCCB 4 pole, 415 volts Adjustable type,250 Amps, 36KA ,50 C/S with spreader link - 02 Nos Make : Schneider/L&T/Legrand. (ii) MCCB 4 pole, 415 volts Adjustable type,200 Amps, 36KA,50 C/S with spreader link - 04 Nos Make : Schneider/L&T/Legrand. (iii) MCCB 4 pole, 415 volts Adjustable type,100 Amps ,36KA, 50 C/S with spreader link - 02 Nos Make : Schneider/L&T/Legrand. (iv) Indicating lamps, LED type, 230VAC - 3Nos. (v) Digital Voltmeter , 3Phase -01 Nos (vi) Digital Ammeter 3Phase - 1 Nos

GULSHAN SINGH GHAI AND SON