Providing OHT and Pipeline in Maradagi village in Chittapur Taluka

Providing OHT and Pipeline in Maradagi village in Chittapur Taluka

Pumping Machiney Providing,supplying to work site, Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000;3Phase, SS Bowl & Impeller with Low volt Motor as per specifi...

Supply and delivery at site 50mm(2 ” ) dia heavy duty unplasticized PVC Column pipes with heavy duty collers,rubber profile ring,vibration control profile ring,freezing and turbulence free leak proo...

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its latest amendments.1x3x6 Sq...

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia..etc complete as per specifications and as per directions...

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments 50mm dia..etc complete as per specifications and as per directions of En...

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No, Analog Ammeter, 1 No Analog ...

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioning of the same at t...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/16/20/2...

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supply and erection of two pair of supporting clamps, bore well c...

Labour charges for Erection of indoor type panel board and meter board units with all necessary materials and labour tools and equipments including providing cement concrete foundation bed etc., compl...

Providing main connection from pole - PVC insulated sheathed steel wire cable as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit. 3x 10 sqmm.etc complete as ...

Supply and delivery at site Accessories for pumpset like SS Groove Nipples,SS Studs & Nuts,Screw Clips &water proof Insulation Tape etc complete with ISI mark.etc complete as per specifications and as...

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board unit..etc complete as...

Earthing: Supplying and fixing and wiring earth electrode for grounding circuits IC cutouts and other equipments on the meter board in the pit. The pits should be filled up with equal proportion of sa...

Pump House Earth work excavation by manual means for drains,canals, waste weir draft, approach channels, key trench, foundation of Bridges and such similar works, as per drawing and technical specific...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...

Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2.5 ...

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and includingwater thinnable priming coat with cement primer after tho...

Providing Air valve confirming to IS 1538 (Part-I to XXII) 1978 with latest amendments if any 20mm

Supplying, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and ...

75 MM ELECTRO FUSION COUPLER

75 MM ELECTRO FUSION ELBOW

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 65 mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shor...

Providing bedding for the pipeline trenches in black cotton and rock reaches including watering and consolidation by punners etc. complete with all lead and lift with Murrum.

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m , and lift upto 1.5...

OHT Supplying Laying and Jointing Cast Iron CI double flanged pipes true to linehoisting of DIflanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to w...

Supplying Laying and Jointing Cast Iron CI double flanged pipes true to linehoisting of DIflanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to work ...

Supplying Laying and Jointing Cast Iron CI double flanged pipes true to linehoisting of DIflanged pipe in position and aligning to correct plumb including cost of jointing materials conveying to work ...

Supplying and fixing DICI puddle flanges conforming to IS 71811986 with latest ammendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc comp...

Supplying and fixing DICI puddle flanges conforming to IS 71811986 with latest ammendments in position for RCC walls including hoisting and conveying them to work spot with all lead and lifts etc comp...

ProvidingDuck foot bend confirming to IS 1538 Part 1978 with latest amendments if any cost of all materials labour charges etc complete 100mm dia outletas per specificationdesign and drawings includin...

ProvidingDuck foot bend confirming to IS 1538 Part 1978 with latest amendments if any cost of all materials labour charges etc complete 80mm dia Inletover flow scourandbypassas per specificationdesign...

Providing Bell mouthed pipes flanged confirming to IS 1538 Part 1978 with latest amendments if any cost of all materials labour charges etc complete80mm dia Inletover flowas per specificationdesign an...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS1865 and of grade GGG 4050 shaft of stainless steel wedge fully r...

Supplying and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia with body bonnet of ductile iron DI conforming to IS1865 and of grade GGG 4050 shaft of stainless steel wedge fully r...

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring...

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works and depth upto 3 m as per drawing and technical specifications including setting out shoring...

Providing and laying in position Reinforced cement concrete for top dome of water tank over the staging above the ground level The granitetrapbasalt crushed graded coarse aggregates and fine aggregate...

Providing ThermoMechanically Treated bars of grade Fe500 or more Steel einforcement for RCC work including straighteningcutting bending placing in position binding and anchoring to adjacent members wh...

Providing and fixing RCC final and ventilators as per approved design and specifications with form works and protected with wire mesh The plinth to be of RCC circular pillars and canopy with an orname...

Providing and fixing MS inspection door of size 60 cms x 60 cms including MS frame made of 50x50x6mm angle shutters made of 3mm thick MS sheets with hinges locking arrangements at top etc including pa...

Providing and fixing gauge with iron sheet or enamelled guage plate of 3mm to 4mm thick 023 M width with copper floats indicators and flexible nylone wires painting figures with approved enamel paint ...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc before removal of scaffolding for new RC...

Earth work excavation for pipelinescablesIn all kinds of soils Depth upto 150m by Manual means upto 600 mm trench width as per drawing and technical specifications including setting out shoring strutt...

Providing and laying in position plain cement concrete PCC 124 using 40 mm aggregate for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine ag...

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating EACH deposited layer by ramming...

Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings rafts and combind footing etcwith smooth finishing the exposed faces in CM 14 12mm thick concrete...

Providing and laying in position Reinforced cement concrete for columns braces and ring beam above ground level The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as per releva...

Providing and laying in position Reinforced cement concrete for shell portion bottom domeslab and ribs over the staging The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as pe...

Providing and laying in position Reinforced cement concrete for side walls of water tank over the staging above the ground level The granitetrapbasalt crushed graded coarse aggregates and fine aggrega...

Supplying and fixing lightening arrestor with aluminium strip 25mm x 3mm size including finial and grounding aluminium strip to be embeded in one of the columns in and independent GI conduit of 40mm d...

Supplying and fixing 40mm dia GI pipe medium duty pipes hand railing 3 rows fixed to RCC 124 vibrated post of 150x150mm at bottom and 100x150mm at top placed at 2 Mtrs intervals for a height of 750mm ...

Ladder inside the container Providing anodized aluminium ladder using 65mm x 32mm x 30mmC section for ladder side channel x 25mm dia flutal pipe for Rungs at 250mm cc ladder fixed at an angle of 70 de...

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shadewith all lead and lift as directed by the Engineerincharge of work

Painting Two Coats on New Concrete Surfaces Painting two coats after filling the surface with synthetic enamel paint in all shades on new plastered concrete surfacesas per specificationdesign and draw...

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including setting out shoring s...

Earth work excavation for Foundation In all kinds of soils Depth upto 3 m by mechanical means for all works & depth upto 3 m as per drawing and technical specifications including setting out shoring s...

Filling available excavated earth excluding rock in trenches plinth sides of foundations and other similar works etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming...

Providing and laying in position plain cement concrete PCC 124 using 40 mm aggregate for levelling course for all works in foundation The granitetrapbasalt crushed graded coarse aggregates and fine ag...

Providing and laying in position Reinforced cement RCC M25 Design Mix with 20mm aggregate for footings rafts and combind footing etcwith smooth finishing the exposed faces in CM 14 12mm thick concrete...

Providing and laying in position Reinforced cement concrete for Spiral Staircase over the staging above the ground level The granitetrapbasalt crushed graded coarse aggregates and fine aggregates as p...

Providing ThermoMechanically Treated bars of grade Fe500 or more Steel reinforcement for RCC work including straighteningcutting bending placing in position binding and anchoring to adjacent members w...

Providing two coats of water proof cement painting with approved colour and shade over one coat of primer including scrapping the surface with wire brushes etc before removal of scaffolding for new RC...

Earth work excavation by manual means for In all kinds of soils Depth upto 15 m drainscanals waste weir draft approach channels key trenches foundation of bridges and such simillar works in all kinds ...

Providing and laying in position Reinforced cement concretefor M20 Design Mix Using 20 mm nominal size graded crushed coarseaggregates all Foundation works The granitetrapbasalt crushed graded coarse ...

Providing and fixing MS inspection door of size 60 cms x 60 cms including MS frame made of 50x50x6mm angle shutters made of 3mm thick MS sheets with hinges locking arrangements at top etc including pa...

Providing ThermoMechanically Treated bars of grade Fe500D or more Steel reinforcement for RCC work including straighteningcutting bending placing in position binding and anchoring to adjacent members ...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing, Laying and Fixing GI pipes conforming to IS 1239:1990 with latest amendments complete with GI fittings (excluding the cost of fittings) with cuts and threads wherever necessary, including t...

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 100 mm

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 80 mm

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 65 mm

Providing wrought mild steel (galvanized) 15 mm dia GI collar confirming to IS 1239-II, 1991 with latest amendments if any. 50 mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.100 mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.80 mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.65 mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any.50 mm

Cutting Asphalt /Concrete road surface using machine cutter for leakage pit with earth work excavation in all classifications of soil including all lead and lifts bailing out water with pumps includin...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing wrought mild steel (galvanized) GI collar confirming to IS

1239-II, 1991 with latest amendments if any.For 20 mm dia GI collar:

Supply and delivery at site wrought middle steel (galvanized) GI elbow

confirming to IS 1239-II, 1991 with latest amendments if any for: 20mm

Supply and delivery at site wrought middle steel (galvanized) GI bend confirming to IS 1239-II, 1991 with latest amendments if any 20mm

Providing of Gunmetal Ball Valve of Non rising stem, screwed in bonnet, inside screw, integral seats, screwed female ends to IS:554/ BS 21/ ISO 7, Unbreakable sheet metal Handwheel, confoming to IS:77...