Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹12.4 L
EMD Value
₹24,858
Closing Date
16 Sept 2024, 5:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Aircraft Division, Bangalore
HINDUSTAN AERONAUTICS LIMITED AIRCRAFT DIVISION Vimanapura Post Bangalore - 560 017
ROOF SHELTER FOR RO SYSTEM REACTION AND HOMOGENIZATION AREA OF NEW ETP INSIDE AIRCRAFT DIVISION HAL BC
9294
AC/PM/TN/C-02/08-2024
Works
Bangalore Complex- Aircraft Divn
₹0
₹24,858
16 Sept 2024
26 Aug 2024
26 Aug 2024
16 Sept 2024
HINDUSTAN AERONAUTICS LIMITED BANGALORE AIRCRAFT DIVISION
NAME OF THE WORK: ROOF SHELTER FOR RO SYSTEM, REACTION AND HOMOGENIZATION AREA OF NEW ETP INSIDE AIRCRAFT DIVISION, HAL (BC)
Name of the Contractor :
Sl. No. DSR 2023 Ref Specification Quantity Unit Rate in Figs [Excluding GST] Rate in Words Amount
Preamble: (1) The subject work has been called on works contract basis and prevailing GST for same is 18%. Any change in GST +/- during the currency of contract shall be on HAL account. The Tenderer shall abide by prevailing GST act. (2) L1 (lowest quote) will be determined based on the total quoted amount including GST. (3) This BOQ specification has to be read in conjunction with detailed technical specification and tender drawings if any.
1 A DISMANTLING AND DEMOLITION
15.2.2 Demolishing cement concrete of nominal c1:4:8 or leaner mix manually/by mechanical means including disposal of material within 50 metres lead as per direction of engineer in charge 3.5 cum 1381.40 Rupees One Thousand Three Hundred Eighty One and Forty Paise Only 4834.90
2 B CARRIAGE OF MATERIAL
1.1.18 Disposal of moorum/building rubbish/malba/similar unserviceable ,dismantled or waste material by mechanical transport including loading,transporting,unloading to approved municipal dumping ground for lead up to 10km for all lifts complete as per direction of engineering in charge .Note : Item to be applicable in urban areas having direction for restricted hours for movement/plying of laod carrying motor vehicke of 3.5 cum or more. 15 cum 453.94 Rupees Four Hundred Fifty Three and Ninety Four Paise Only 6809.10
2.8.1 Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m. 20 cum 239.15 Rupees Two Hundred Thirty Nine and Fifteen Paise Only 4783.00
4.1.8A Providing and laying in position cement concrete of specified grade(1:4:8 -1 cement :4 manufactured sand derived from Recycled concrete aggregates:8 graded stone aggregates 40mm nominal size recycled aggregates) excluding the cost of centering and shuttering - All work up to plinth level : 4 cum 4782.21 Rupees Four Thousand Seven Hundred Eighty Two and Twenty One Paise Only 19128.84
4.2.3A Providing and laying cement concrete(1:2:4-1 Cement : 2 coarse sand (zone-III) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing 18 cum 8885.49 Rupees Eight Thousand Eight Hundred Eighty Five and Forty Nine Paise Only 159938.82
5 E REINFORCEMENT STEEL
5.22A.6 Steel reinforcement(Thermo-Mechanically Treated bars of grade Fe-500D or more.)for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. 850 Kg 99.09 Rupees Ninety Nine and Eight Paise Only 84222.25
5.9.1 Centering and shuttering including strutting, propping etc. and removal of form work for :Foundations,footings,bases of columns etc mass concrete 45 Sqm 360.28 Rupees Three Hundred Sixty and Twenty Eight Paise Only 16212.60
7 G MASONRY WORK
6.4.2 Brick work in Cement mortar 1:6 (1 cement : 6coarse sand) with common burnt clay F.P.S. (non modular) bricks class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes 0.5 cum 8365.90 Rupees Eight Thousand Three Hundred Sixty Five and Ninety Paise Only 4182.95
8 H FINISHING -CEMENT PLASTER
13.2.2 Providing and laying plaster mix 1: 6 ( 1 cement : 6 coarse sand) of 15mm thick plaster on the rough side of single or half brick wall 10 Sqm 351.87 Rupees Three Hundred Fifty One and Eighty Seven Paise Only 3518.70
9 I PAINTING -ON NEW WORK
13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade
13.61.1 Two or more coats on new work 55 Sqm 143.23 Rupees One Hundred Forty Three and Twenty Three Paise Only 7877.65
10 J STRUCTURAL STEEL WORK
10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 5200 Kgs 122.83 Rupees One Hundred Twenty Two and Eighty Three Paise Only 638736.80
11 K GALVALUME ROOF SHEET
M.R Supplying, fabricating and fixing single skin trapezoidal profiled precoated coloured sheet of approved colour,shape and size for roofing,cladding, flashing, curves, gutters etc., The sheet shall be of 930-1020mm cover width with 28-32mm crest depth at 186-250mm c/c manufactured out of 0.5mm (TCT) total coated thickness high tensile steel plain sheet with aluminum Zinc alloy coating substrate The profile and length of the sheet shall be to suit with site requirement. The steel base material shall have 550Mpa yield strength made out of cold rolled steel and shall be coated with anti corrosive layer of Zinc aluminum alloy coating,Zinc 43.5% and aluminium 55% with minimum 150 gms/m² mass total on both sides.
All specials and accessories(such as Gutter & ridge shall be paid separately ) should also be factory fabricated. All ridges/curves, gutters, flashing or any other covering shall be made out of same materials as that of roofing. The product shall be fastened using No.14-10X20mm (or as per design) galvanized hex-self drilling fasteners of appd. make and quality including neoprene washer connecting with purlins/pre cast RCC beam(purlins).All side & on each crest of sheet for end laps shall be adequate to make the roof leak proof.The work shall be carried out as per manufacturers specifications etc., complete & furnish performance guarantee for a period of 3 years for leak proofing.The payment will be done on actual finish/curved surface areas of the sheets. No separate payment will be made for the laps of sheet, , bolts, nuts, washers, adjustable bolts & supports for gutter & other fixtures.
These are assumed to be indicated in the net quoted rates.Necessary cutout in the roof/cladding shall be provided for fixing translucent sheet etc., complete including necessary necessary cut out shall be made for exhaust fans,Turbo ventilators and polycorbonate sheet or fibre sheet etc.,The old sheet removed groove to be cemented with CM (1:4) and performance guarantee for a period of ten years for leak proof, executed on stamp paper of ` 100/-
(The agency shall submit test certificate regarding specification of materials and other properties from the manufacturer and sample shall be got approved before ordering) etc., all complete as directed by E.I.C.,(Lap will not be considered for payment)
0.5mm (TCT ) Galvalume sheeting 124 Sqm 571.58 Rupees Five Hundred Seventy One and Fifty Eight Paise Only 70875.92
12 L TRANSULENT ROOF SHEET
a 12.47.1 Supplying and fixing of fibre glass sheet 2mm thick in roof transulent including fixing to the sheet surfcae with washers or screws etx all complte as directed by EIC/OIC 25 Sqm 1287.46 Rupees One Thousand Two Hundred Eighty Seven and Forty Six Paise Only 32186.50
Total (Excluding GST) 1053308.03
The Tenderer has to Quote Percentage Above / Below as Specified and Percentage Shall be Quoted in Figures. Approximate Amount Put to Tender State Above or Below Percentage in Figures [Excluding GST] Amount
Tenderer's Quote (Excluding GST) 1053308.03 ABOVE % 1053308.03
Add 18% GST Rupees One Lakh Eighty Nine Thousand Five Hundred Ninety Five and Forty Four Paise Only 189595.45
Grand Total (Including GST) Rupees Twelve Lakh Forty Two Thousand Nine Hundred Three and Forty Seven Paise Only 1242903.48
Note: The tenderer has to quote percentage above / below against the total amount considering the specified standard rates. If the contractor does not quote any percentage above / below on the total amount, the tender shall be treated as invalid and will not be considered.
WARNING: PLEASE ENTER PERCENTAGE QUOTE
HINDUSTAN AERONAUTICS LIMITED
Aircraft Division
Pre-Qulification Profile
Tender Ref No. or Contract No.: AC/PM/TN/C-02/08-2024
Name of Work: ROOF SHELTER FOR RO SYSTEM, REACTION AND HOMOGENIZATION AREA OF NEW ETP AIRCRAFT DIVISION, HAL(BC), BANGALORE
Estimated Amount in Rs.: Rs.12,42,904/- including GST
PROVISIONAL GST ID NO. for HAL 29AAACH3641R1Z3
Sl.No Description Details Enclosed / Not Enclosed Remarks
1 Name of the Individual / Firm / Company: * Mandatory
2 Type of ownership
If Other, please specify
3 Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,
4 Address for correspondence:
5 (b) Service Tax Registration No
5 (c ) Goods and Service Tax ID No.
6 Contact details
Contact person name Please Enter Contact person Name
Mobile No. Pls Enter Mobile No
Ph. No. with STD code
FAX No. with STD code #N/A #N/A
7 Registered Contractor
If Registered Contractor with HAL Yes/ No Related Document to be Uploaded to eProcurement Portal * Category: E= 75 Lakhs - Lessthan= 100Lakhs F= 50Lakhs - Lessthan 75 Lakhs G = 25Lakhs - Lessthan 50 Lakhs H = 10Lakhs - Lessthan 25 Lakhs I = 5Lakhs - Lessthan 10 Lakhs J = 2Lakhs - Lessthan 5 Lakhs K = Lessthan 2Lakhs 0 7 E 1
Registration No. 199999 7 F 2
Category 200000 6 G 3
PEMD Amount ( If paid ) 499999 6 H 4
8 Bank(s) details: [Copy of the cheque leaf to be uploaded]
Bank Account No.
Name of the Bank
Type of Account
9 Details of person holding the power of Attorney (If different from contact person)
Ph. No. with STD code
FAX No. with STD code
10 DECLARATION I
The document have been read & understood all the contents of the tender document mentioned under terms and conditions ( Page 1 to 160) including price bid do hereby accept all the terms and conditions laid down in the said Tender document and will abide by the same on acceptance and ward of work.
11 DECLARATION II
I/We declare and confirm that - 1. All information and attachments submitted along with this offer are true and correct. 2. I/We are aware that any false information provided herein will result in the rejection of my offer . 3. I/We shall not make refund claims of expenditure incurred in processing this offer. 4. I / We aware that document sought only be submitted for evaluation of offer.
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
raw.json
RAW_JSON
Drawing.pdf
TENDER_DOCUMENT • 0.52 MB
TenderNotice.pdf
TENDER_DOCUMENT • 1.00 MB
Technical_Bid.pdf
TENDER_DOCUMENT • 2.65 MB
Pricebid_freeview.pdf
TENDER_DOCUMENT • 0.49 MB
Preqln_Pofile.pdf
TENDER_DOCUMENT • 0.11 MB
Undertaking.pdf
TENDER_DOCUMENT • 0.62 MB
Price_bid.xlsm
TENDER_DOCUMENT • 0.04 MB
ECSForm.pdf
TENDER_DOCUMENT • 0.46 MB
PreQualn.xlsm
TENDER_DOCUMENT • 0.02 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .