AUGMENTATION UPGRADATION OF WATER SUPPLY NETWORK AT HISAR MIL STATION

Amount

Dismantling , shifting and installation of Serviceable condition centrifugal pump 25 WHP alongwith electric motor 40 HP and connected items from filteration plant No.3 and refixing with required PCC foundation and MS fabrication work at MAP pump house No.6 (DSTV Undeground Sump Feeder Pump) complete all as specified and directed. Note :- (i) PCC and MS steel work will be measured and paid separately. (ii) Dismantling & shifting including installation shall be carried out with in reasonable time allowed by GE, therefore contractor should have managed sufficient T&P and manpower so that services of station may not be hampered.

Dismantling , shifting and installation of Serviceable condition centrifugal pump 25 WHP alongwith electric motor 40 HP and connected items from filteration plant No.3 and refixing with new PCC foundation and MS fabrication work and Protection shed at Raw water reservoir No. 3 to mitigate the problem of gravity flow dependence which is a long channel through various place complete all as specified and directed. Note :- (i) PCC and MS steel work will be measured and paid separately. (ii) Dismantling & shifting including installation shall be carried out with in reasonable time allowed by GE, therefore contractor should have mannaged sufficient T&P and manpower so that services of station may not be hampered.

Dismantling , shifting and installation of Serviceable condition centrifugal pump 30 WHP alongwith electric motor 50 HP and connected items from filteration plant No.1 and refixing with new PCC foundation and MS fabrication work and Protection shed at Raw water reservoir No. 3 to mitigate the problem of gravity flow dependence which is a long channel through various place complete all as specified and directed. Note :- (i) PCC and MS steel work will be measured and paid separately. (ii) Dismantling & shifting including installation shall be carried out with in reasonable time allowed by GE, therefore contractor should have mannaged sufficient T&P and manpower so that services of station may not be hampered.

Dismantling and installation shifting of Serviceable condition centrifugal pump 15 WHP alongwith electric motor 25 HP and connected items from Pump House No. 6 and refixing with required PCC foundation,MS fabrication work at Bansi park Pump house complete all as specified and directed. Note :- (i) PCC and MS steel work will be measured and paid separately. (ii) Dismantling & shifting including installation shall be carried out with in reasonable time allowed by GE, therefore contractor should have mannaged sufficient T&P and manpower so that services of station may not be hampered.

Dismantling of old vintage clear water centrifugal pump 30 WHP alongwith electric motor 50 HP from Filteration Plant 1 and deposit the same in AGE E/M yard of GE complete all as specified and directed . Note : All T&P and transportation shall be arranged by the contractor and nothing extra shall be admisible on this account.

Dismantling of old vintage clear water centrifugal pump 35 WHP alongwith electric motor 60 HP alongwith electric motor from Filteration Plant 2 and deposit the same in AGE E/M yard of GE complete all as specified and directed. Note : All T&P and transportation shall be arranged by the contractor and nothing extra shall be admissible on this account.

Dismantling of old vintage Raw water centrifugal pump 12 WHP alongwith electric motor 20 HP alongwith electric motor from Filteration Plant 2 and deposit the same in AGE E/M yard of GE complete all as specified and directed. Note : All T&P and transportation shall be arranged by the contractor and nothing extra shall be admisible on this account.

Dismantling of old vintage Raw water vertical pump 12 WHP alongwith electric motor 20 HP motor from Filteration Plant 1 and deposit the same in AGE E/M yard of GE complete all as specified and directed. Note : All T&P and transportation shall be arranged by the contractor and nothing extra shall be admisible on this account.

Supply, installing,testing and commissioning of Pumping sets (pump & Motor), centrifugal with bronze impeller , electric driven Induction Motor Squirrel cage of minimum capacity 60 HP, 3 phase, 415V with minimum discharge 3000 LPM at 40 metre head and of suitable RPM including necessary PCC foundation as recommended by OEM with anti vibration Pad as required on site at FP 1& FP 3 complete all as specified and directed . (2W+1S)

Supply, installing,testing and commissioning of Pumping sets (pump & motor), centrifugal with bronze impeller , electric driven Induction Motor Squirrel cage of minumum capacity 75 HP, 3 phase, 415V with minimum discharge 3500 LPM at 40 metres head and of suitable RPM including necessary PCC foundation as recommended by OEM with anti vibration Pad as required on site at FP-2 complete all as specified and directed . (2W+1S)

Supply, installing,testing and commissioning of Pumping sets (Pump & Motor), centrifugal with bronze impeller , electric driven Induction Motor Squirrel cage of minimum capacity 20 HP, 3 phase, 415V with minimum discharge 2500 LPM at 20 metre head and of suitable RPM including necessary PCC foundation as recommended by OEM with anti vibration Pad as required on site at FP-2 complete all as specified and directed . (2W+1S)

Supply, installing,testing and commissioning of vertical pump for Raw water with with bronze impeller , electric driven Motor of minimum capacity 25 HP, 3 phase, 415V with minimum discharge 3000 LPM at 20 metres head at as per requirement of existing filter bed ( Filter bed capacity2x 25000 Gallon/Hr) and of suitable RPM including of starter including necessary PCC foundation and fabrication work as recommended by OEM with anti vibration Pad as required on site at FP1 complete all as specified and directed . (1W+1S)

Supply, installing,testing and commissioning of Openwell submersible pump set (pump & motor) of minimum capacity 7.5 HP, 3 phase, 415V minimum discharge 2000 LPM at 10 metres head and of suitable RPM including starter for sludge tank at FP 2 complete all as specified and directed .

Supply, installing,testing and commissioning of Openwell submersible pump set (pump & motor) of minimum capacity 25 HP, 3 phase, 415V with minimum discharge of 6000 LPM at 10 metres head and of suitable RPM including starter for UG Sump at FP 4 complete all as specified and directed .

Supply, installing,testing and commissioning of submersible pump set (pump & motor) electric driven of minimum capacity 10 HP, 3 phase, 415V with minimum discharge 2500 LPM at 10 metres head and of suitable RPM suitable for 200/250 mm dia borewell(casing pipe size 200/250 mm) including starter at existing borewell near FP 1 complete all as specified and directed .

Supply, installing,testing and commissioning of submersible pump set (pump & motor) electric driven of minimum capacity 20 HP, 3 phase, 415V with minimum discharge 2500 LPM at 20 metres head and of suitable RPM suitable for 200/250 mm dia borewell(casing pipe size 200/250 mm) including starter at existing borewell near FP 3 complete all as specified and directed .

S&F including testing as in repair submersible Copper cable, 25 sqmm , single core, 415V complete all as specified and directed.

S&F including testing as in repair submersible Copper cable, 16 sqmm, single core, 415V complete all as specified and directed.

S&F including testing as in repair submersible Copper cable, 10 sqmm Single core, 415V complete all as specified and directed.

S&F including testing as in repair submersible Copper cable, 6 sqmm Single core, 415V complete all as specified and directed.

S&F including testing as in repair submersible Copper cable, 6 sqmm 3 core flat, 415V complete all as specified and directed.

S&F including testing as in repair Submersible Copper cable, 4 sqmm 3 core flat ,415V complete all as specified and directed.

S&F including testing as in repair submersible Copper cable, 10 sqmm 3 core flat, 415V complete all as specified and directed.

Supply, laying and testing as in repair cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing as in repair cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing as in repair cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed.

Dismantling and shifting including of Serviceable condition Diesel Engine driver generating set of capacity 30 KVA/24 KW alongwith connected items from MAP Pump House no.6 and refixing with new PCC foundation,MS fabrication work etc at Bansi Park Pump House complete all as specified and directed. Note :- (i) PCC and MS steel work will be measured and paid separately. (ii) Dismantling & shifting including installation shall be carried out with in reasonable time allowed by GE, therefore contractor should have mannaged sufficient T&P and manpower so that services of station may not be hampered.

Supply and installation including testing of silent diesel Engine driver generating set 415, 3 phase 4 wire, engine as per IS : 10001/10002 and Alternator as per IS: 13364 complete with relay penal and switch gear for automatic starting on main failure, control panel having meter and sound proof canopy as per CPCB norms and foundation etc. of capacity 62.5 KVA (at Pump hose No. 6) complete all as specified and directed. TECHNICAL SPECIFICATIONS OF DG SET SILENT TYPE DG SET • Air Cooled Diesel Engine (CPCB NORMS COMPLIANCE) developing 80 BHP @ 1500 RPM & Alternator 62.5 KVA Alternator rated at 3 Phase, 415 Volts, 50 Hz; 0.8 p.f. @ 1500 RPM both mounted, and aligned on a common MS base frame complete with MS Fuel Tank as per manufacture manual Integrated Control Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame,1 No.12 Volts DC Battery, Battery Leads, 1st fill of Lube Oil. Canopy Noise level- 77dB(A) at 1 metre

Supply and installation including testing of silent diesel engine driven generating set 415 Volts, 3 phase 4 wires, engine as per IS : 10001/10002 and Alternator as per IS : 13364 with suitable AMF Panel complete with foundation (as per OEM design) control panel with necessary meter and sound proof canopy as per CPCB norm of capacity 500KVA as per specifications Model :KG1500WS of Kirloskar (for Plant No 2&3) or equivelent in the make specified in Appx 'B'. TECHNICAL SPECIFICATIONS OF DG SET DIESEL ENGINE 4 cycle :in –line 6 cylinders, liquid cooled turbocharged with after cooler, developing 587 bhp @ 1500 RPM, V type, 4 valve per cylinder, electric start, compression ignition, 4 stroke engine designed to run continuously at 1500 +- 10 %RPM confirming to rime rating ISO : 3046 standard with an overload capacity of 10 % for one hour in every 12 hrs of operation. Diesel Engine conforms to present CPCB norms. The diesel engine will comprise of following: - Flywheel with starter Ring for Generating Set. Air filter. Lube oil cooler assembly with accessories. Exhaust air manifold. Exhaust Silencer. Expansion bellow.

Fuel filter. Lube oil filter. Exhaust gas Turbocharger and charge air-cooled. Radiator with pusher type fan, with fan guard, coolant pump. 24 V (2x12V) electrical starting system with starter motor and battery charging alternator In‐line mono block Fuel Injection Pump with Electronic Governing & Isochoronus capability Bore x Stroke – 130 x 160 mm. Engine Cubic Capacity - 19.90 litres Fuel tank capacity -990 Litres, Canopy Noise level- 77dB(A) at 1 metre Engine mounting supports. Engine control panel – Microprocessor based Controller Model 745. Engine Safeties , Alarms and Trips K Cool super plus corrosion inhibitor coolant for cooling. Engine Operator/Maintenance & Spare parts CD Engine Warranty Certificate. Engine test certificate

ALTERNATOR Rated at 500 KVA/400 KW, 415 Volts, 3 Phase, 4 wire, 0.8 p.f. (lag), 50 Hz, 1500 RPM, in accordance with IS 13364 as per following specifications: Type: Sailent poles, Single bearing, Brushless type, suitable for direct coupling to engine. Rating: Guaranteed to deliver required output at the ambient temperature conditions. Suitable for an over‐load of 10% for 1 hour in every 12 hour of operation. Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage regulator, which holds output voltage within desired limits. (+/‐1%). Excitation: Self excited‐self regulated. Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage and speed. Equipped with AREP (Auxiliary regulation Exciting Principle) winding to give performance equivalent to PMG as standard scope of supply Vibration: Suitable for direct coupling with Engine and mounted on common fabricated sheet metal base frame. Enclosure: Screen protected drip proof enclosure with IP 23 degree of protection. Cooling: Air Cooled type with radial fan mounted on Rotor. Winding and Insulation: Insulation class H as defined in IS 13364

Supply and installation including testing of silent diesel engine driven generating set 415 Volts, 3 phase 4 wires, engine as per IS : 10001/10002 and Alternator as per IS : 13364 complete with foundation (as per OEM design) control panel with necessary meter and sound proof canopy as per CPCB norm of capacity 20KVA (18 mech) complete all as specified and directed TECHNICAL SPECIFICATIONS OF DG SET SILENT TYPE DG SET • Air Cooled Diesel Engine (CPCB NORMS COMPLIANCE) developing 25.5 BHP @ 1500 RPM & 20 KVA Alternator rated at 3 Phase, 415 Volts, 50 Hz; 0.8 p.f. @ 1500 RPM both mounted, and aligned on a common MS base frame complete with MS Fuel Tank Integrated Control Panel, Residential Exhaust Silencer, AVM Pads fitted on base frame,1 No.12 Volts DC Battery, Battery Leads, 1st fill of Lube Oil. Fuel tank capacity -150 Litres, Canopy Noise level- 77dB(A) at 1 metre

Taking up cast iron/ mild steel (including all fittings) 200 mm bore, with flange and nut bolts including all fittings i.e bend, reducer from the pumpsets delivery side etc complete all as specified and directed.

Taking up cast iron/ mild steel (including all fittings) 250 mm bore, with flange and nut bolts including all fittings i.e bend, reducer from the pumpsets delivery side etc complete all as specified and directed.

Taking up cast iron/ mild steel (including all fittings) 300 mm bore, with flange and nut bolts including all fittings i.e bend, reducer from the pumpsets delivery side etc complete all as specified and directed.

Supply, Laying, jointing and testing mild steel pipe 100 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing mild steel pipe 150 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (Note: Excavation and earth work shall be measured and paid for separately)

Supply, Laying, jointing and testing mild steel pipe 400 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (For Header of pumpsets) (Note: Excavation and earth work shall be measured and paid for separately) .

Supply, Laying, jointing and testing mild steel pipe 500 mm bore, heavy grade, ISI marked, with all fittings like sockets flanges, unions, bends, elbow etc laid in trenches or along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed (For Header of pumpsets) (Note: Excavation and earth work shall be measured and paid for separately) .

S&F cast iron Valve,butterfly conforming to IS 13095, 500 mm dia complete all as specified and as directed.

S&F cast iron Valve,butterfly conforming to IS 13095, 400 mm dia complete all as specified and as directed.

S&F cast iron Valve,butterfly conforming to IS 13095, 150 mm dia complete all as specified and as directed.

S&F cast iron Valve,butterfly conforming to IS 13095, 100 mm dia complete all as specified and as directed.

Taking up cast iron water mains (including all fittings) 500 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. (Note: Excavation and earth work shall be measured and paid for separately)

Taking up cast iron water mains (including all fittings) 400 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 300 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 250 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 200 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 150 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 100 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Taking up cast iron water mains (including all fittings) 80 mm bore, with spigot and socket ends and lead joints including burning out joints and recovering lead complete all as specified and as directed. Note: Excavation and earth work shall be measured and paid for separately

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 500mm bore including tyton joint complete all as specified and directed. Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Fittinsg shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 400mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 300mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 200mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 150mm bore including tyton joint complete all as specified and directed. Note :- (i) Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-9 specification with outside zinc coating of size 100mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-7 specification with outside zinc coating of size 150mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-7 specification with outside zinc coating of size 100mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Supply, laying and testing in trenches, under floor, under road, connecting, jointing and testing ductile iron pressure pipe, centrifugally cast ISI marked with socket and spigot ends confirming to IS-8329/2000 of standard length of K-7 specification with outside zinc coating of size 80mm bore including tyton joint complete all as specified and directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly. (iii) cost of tyton joint is included in this unit rate of item.

Taking up or down old steel tubing 15 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately. (ii) Fittings shall be measured and paid for separetly.

Taking up or down old steel tubing 20 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 25 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 40 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 50 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 80 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 100 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Taking up or down old steel tubing 150 mm bore and connections from trench/floor/along wall complete all as specified and as directed. Note :- Excavation and earth work will be measured and paid separately.

Supply, Laying, jointing and testing galvanized iron tubes 15 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified .

Supply, laying, jointing and testing galvanized iron tubes 20 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified .

Supply, laying, jointing and testing galvanized iron tubes 25 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified .

Supply, laying, jointing and testing galvanized iron tubes 40 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified .

Supply, laying, jointing and testing galvanized iron tubes 50 mm bore medium grade with all fittings confirming to IS-1239, laid in trenches or alongwall or roofs and in floors etc complete all as specified .

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 500 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc and including taking down complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 400 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 300 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 250 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 200 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 150 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.6 IS-14846/2000 marked 100 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.0 IS-14846/2000 marked 150 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.0 IS-14846/2000 marked 100 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

Supply, laying and jointing as in repair cast iron sluice valve of class PN-1.0 IS-14846/2000 marked 80 mm bore with steel spindle, & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16mm dia etc complete all as specified and directed.

M&L DI fittings for spigot socketed end pipe upto size 150 mm bore Bends (any type, radius andangle) tapers any type,(straight, bend, increasing,decreasing or double socket etc.)Tee pieces single branch. "Y"junction, double branch, cross(all sockets or socket and spigot) collars, caps and plugs. Note : joints, excavation and earth work shall be measured and paid separately.

All as per item No. 86 here-in-before but for size 200 mm to 300 mm bore

All as per item No. 86 here-in-before but for size upto 500 mm bore

M&L for cutting cast iron 500 mm bore pipes for insertion of new tees,branches, etc. complete all as specified and directed. (Both sides cut shall be measured as one unit) Note : Fitting i.e. tee and branches etc shall be measured and paid separately.

All as per item No. 89 here-in-before but of size 400 mm bore.

All as per item No. 89 here-in-before but of size 300 mm bore.

All as per item No. 89 here-in-before but of size 250 mm bore.

All as per item No. 89 here-in-before but of size 200 mm bore.

All as per item No. 89 here-in-before but of size 150 mm bore.

All as per item No. 89 here-in-before but of size 100 mm bore.

All as per item No. 89 here-in-before but of size 80 mm bore.

M&L for run lead joint for 500 mm bore cast iron pipe and fittings including material like lead, spun yarn, caulking etc complete all as specified.in new pipes / in leaking joints including dewatering the trenches/ pits where ever required

All as per item No. 97 here-in-before but size of 400 mm bore.

All as per item No. 97 but size of 300 mm bore.

All as per item No. 97 but size of 250 mm bore.

All as per item No. 97 but size of 200 mm bore.

All as per item No. 97 but size of 150 mm bore.

All as per item No. 97 but size of 100 mm bore.

All as per item No. 97 but size of 80 mm bore.

Supply and fix as in repair gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm bore fixed complete all as specified and as directed.

All as per item No. 105 but of size 20 mm bore.

All as per item No. 105 but of size 25 mm bore.

All as per item No. 105 but of size 40 mm bore.

All as per item No. 105 but of size 50 mm bore.

S&F as in repair air release valve of 150 mm dia complete all as specified and directed

S&F as in repair Non return Valve class PN-1.6, heavy grade with by pass arrangement of 400 mm dia complete all as specified and directed

S&F as in repair Non return Valve class PN-1.6, heavy grade with by pass arrangement of 200 mm dia complete all as specified and directed

S&F as in repair Non return Valve class PN-1.6, heavy grade with by pass arrangement of 150 mm dia complete all as specified and directed

S&F as in repair Non return Valve class PN-1.6, heavy grade with by pass arrangement of 100 mm dia complete all as specified and directed

M&L construction of brick masonry valve pit of size 1500 mm X 1500 mm X 1250 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40mm X 40mm X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soft/loose/hard/dene soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

M&L construction of brick masonry valve pit of size 1200 mm X 1200mm X 1200 mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40mm X 40mm X 6 mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4, 15mm thick plastering in cement mortar 1:4 (internally on all brick wall and external upto 15cm below ground level) and necessary excavation and earth work in any type of soil, returning, filling in, disposal of surplus spoil to a distance not exceeding 50 mtr 15 cm thick PCC 1:4:8 type D-2 in PCC foundation projected by 15cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping complete all as specified and directed.

Taking out unserviceable mild steel covers of valve chambers and Supply and Fixing covers of valve chambers duly hinged fabricating the frame by using 3.15mm thick mild steel sheet and angle iron of size 40 mm X 40 mm X 6 mm thick including making locking arrangement and fixing the above cover in PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate and providing hold fast of appropriate size made to shape of 50mm x 6mm mild steel flat including two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking out layers of filter material from filter beds complete with silt and mud and depositing at a distance not exceeding 50mtr all as directed including spreading and leveling (different materials to be segregated and deposited separately) complete all as specified and directed..

Taking out filter gravels from filter beds complete with mud and silt, stacking at site, washing using water jets and concentrated hydrochloric acid and segregating using sieves of different size i.e. 50 to 25mm, 25 to 15mm, 15 to 6.5mm and 6.5 to 4.75mm complete for reuse including removal of under size gravel /mud at distance not exceeding 50 mtr complete.

Supplying, laying and packing the fresh stone gravel of size 50mm to 25mm of quartz or quartzite quality in the filter beds to the required thickness after proper washing of natural stone gravel complete. Note :- For payment purpose, before laying in position, stack measurement shall be taken and 10% deduction shall be made on account of bulkage to arrive the quantity to be considered for payment.

All as per item No. 120 but size of gravel 25 to 15mm

All as per item No. 120 but size of gravel 15 to 6.5mm

All as per item No. 120 but size of gravel 6.5 to 4.75mm

Supply and filling the fresh filtered fine sand quartz or quartzite in layers of coarse and fine sand in the filter beds to the required thickness after proper washing the sand complete all as specified and directed Note:- Old/retrieved sand shall not be reused in the work

Laying and repacking only stone gravel of size 50 to 25mm as retrieved from Srl Item No 119.00 above in filters beds to the required thickness after proper washing complete.

All as per item No 125 but size of gravel 25 to 15mm

All as per item No 125 but size of gravel 15 to 6.5mm

All as per item No 125 but size of gravel 6.5 to 4.75mm

S & F as in repair water pressure gauge dial type as per existing pattern and size including dismantling and taking out unserviceable pressure gauge all as directed.

Dismantling/Demolition of brickwork or stone/boulder masonry,built in lime mortar including all quoins,arches,pillars,etc., but excluding ashlar facings,dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with subclass'B' bricks, straight or curved on plan exc 6m mean radius,built in cement mortar 1:4 complete all as specified and directed.

M&L for providing cement concrete 1:2:4 type -B1 (20 mm graded aggregate) in lintels upto 1.5 m clear span,cills,steps,seismic and other similar bands, plinth courses, parapets and railings upto 60 cm in height , coppings,kneelers,apex stones, bed plates , water troughs and the like including weathering , slightly rounded or chamfered angles and throating, etc complete all as specified and as directed

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in CM 1:4 using and including water proofing compound finished even and smooth without using extra cement complete all as specified and directed. Note:- Cost of WPC is included in the unit rate of this item.

M&L plain cement concrete 1:2:4 type B-2 using 40mm graded mechanically crushed stone aggregate 100mm thick as in road cutting including necessary form work & finishing the surface even and smooth without using extra cement complete all as specified and directed .

Excavation in trenches in soft / loose soil n.exc 1.5 mtr deep and not exceeding 1.5 mtr in width and getting out complete all as specified and directed.

Excavation in trenches in hard / dense (in road cutting / plinth) soil n.exc 1.5 mtr deep and not exceeding 1.5 mtr in width and getting out complete all as specified and directed.

Returning filling with earth obtained from excavation including spreading, watering & consolidation in layers not exceeding 15 cms thick, complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 m & depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

Material & labour for Sand filling in trenches with clean dry fine sand unwashed including gently punning around cables complete all as specified and directed. Note :Punned thickness shall be measured only.

Material & labour for bricks covering to under ground electric cable using sub class 'B' bricks laid dry, flat, perpendicular to the direction of the cable complete all as specified and directed.

Supply errecting & fixing in true vertical position pre stressed concrete pole conforming to IS-1678 of 9 mtr long,102 mm x 172 mm at top and 102 mm x 279 mm at bottom,class 10 including painting to pole in strips with synthetic enamel paint and writing the pole No. as directed by GE complete all as specified Note : Earth work & PCC shall be measured and paid separately

Material & labour for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate . in mass concrete and filling complete for foundation of padestal of pole all as specified & directed.

Material & labour for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate . in mass concrete and filling complete for pole/stay/ all as specified & directed .

Material & labour for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate in coping for replacement of new pole and breaking old existing coping and like including weather slightly rounded or chamfered angles and throaty and necessary form work complete for pole ,all as specified and directed .

Material & labour in replacement of Cross Arms bracings supports, clamps, eye hook and back plates fabricated from structural steel sections including pole clamps stay clamps, D clamps nuts, bolts , washers,welding, bending cold or hot drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of aluminium paint complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed..

Material & Labour for GI pipe light grade 40 mm, suitable for bracket of street light fitting 1.2 mtrs long including MS flat iron clamp 25mmX3mm thick with nut bolt and washers for fixing in Pole and wall complete all as specified and directed.

Supply, laying and testing including taking down cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 4.0 core complete all as specified and directed. Note : Excavation and earthwork shall be measured and paid seperately.

Material & Labour for fixing LED flood light luminaries of cap 120 watt external with lense, 240 volt,Pressure die cast housing with IP 66 protection, heat resistant toughtened clear glass with frame complete with accessories , pre wired up to a terminal block including PVC insulated ,twin core,Aluminium conductor cable of size 1.5 sqmm and mounting attachment complete all as specified and directed.

Supply, laying and testing including taking down cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and directed. Note : Excavation and earthwork shall be measured and paid seperately.

S & F sheet metal enclosure MCB DB SPN 4 way with 200 amps rated bus bar 240 volts double door with isolated Neutral Bar & Shrouded bus bar IP protection 43 having door earthing complete all as specified and directed.

Supply and fixing MCCB 415 Volts, 160 Amp rating 4 Pole,thermal adjustable type, Service Breaking Capacity 25 kA -1 No

Supply and fixing MCCB 415 Volts, 100 Amp rating 4 Pole,thermal adjustable type, Service Breaking Capacity 25 kA -1 No

Supply & Fixing MCCB 240 Volts, 40 Amp rating 4 Pole,thermal type, Breaking Capacity 10 kA thermal adjustable type all as specified and directed.

M&L for starter by replacing the Contactor ML1.5 as required at site complete all as specified and as directed.

All as per item No 155 but Contactor ML 2.

All as per item No 155 but Contactor ML 3

All as per item No 155 but Contactor ML 4

All as per item No 155 but Contactor MNX 32 Amp

All as per item No 155 but Contactor MNX-40 Amp.

All as per item No 155 but Contactor MNX-50.

S& F UPVC Column pipe , Heavy duty , outer Dia 50 mm for submersible pump complete

S& F UPVC Column pipe , Heavy duty , outer Dia 100 mm for submersible pump complete

M& L for making water level indicator from MS sheet of Size 4mX0.6mX3mm thick , with Copper float ball of size 300mm dia , Steel rope 10mm dia as required from tank to indicator including all necessary fabrication, welding works,MS angle ,MS flat, nut, bolts washers complete etc and duly marking the level with paint on MS with necessary pulley arrangement complete all as directed.

Earthing complete with galvanised mild steel earth plate electrode 600X600X6 mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below normal ground level) with the top edge of the earth plate electrode at a depth not less than 1.5m below normal ground level and including GI earth strip 32 x 6 mm bolted (with GI nuts, bolts & check nuts) and riveted to earth plate electrode at one end and connected to metallic bodies of HT/LT equipments etc at the other end, earth strip encased in and including 50 mm bore GI light grade pipe with all fittings from top of earth plate electrode to body of equipment fixed with and including 25x 6mm flat iron clamps, bolts, nuts and washers and including providing watering pipe 20mm bore GI pipe light grade from Bottom of concrete pit to top of earth plate electrode complete all as specified and shown in electrical plate No 3 of MES SSR Part-I. The scope of work includes necessary excavation and earth work in any type of soil, removal of soil upto 50 metre, PCC pit with precast RCC cover, charcoal/salt, funnel, CI frame etc complete all as specified and directed

Supply, laying and testing including taking down cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core complete all as specified and directed.

Supply, laying and testing including taking down cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core complete all as specified and directed.

Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces all as specified.

M& L PCC 1:3:6 type C-2 as in foundation of pedestal and struts complete all as speceified and as directed .

S&F mild steel round bars 10mm dia and over cut to length, bent to shape required, incl cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing clips, confirming to Fe-410-W (Gde.E-250) quality -A or Fe290 (Gde-E-165) complete all as specified and directed

S&F rolled mild steel angle fixed independently without connecting plates, etc and embedding in concrete post and struts in fencing including securing bolts incl cutting tops to shape as directed, drilling holes, flat iron fillets (for securing wire mesh) confirming to Fe 290 (Gde E-165) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other , or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5 cm and n. exc 30 cm long and diameter of neck 5 to 10mm complete all as specified and directed.

S&F Galvenised 2 strand, steel barbed wire, 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and staining and fixing to any type of standard rails staining bolts, including securing or laying at crossings with and provision of galvenised mild steel wire, staples or steel pins,etc complete all as specified and directed(Each line wire to be measured)

Supply only chain link MS galvanisd fencing, any size or type complete all as specified & directed.

Fixing only chain link fencing including line wires,only mesh, size and type to any type of standards, rails,straining bolts etc including provision of binding wire complete all as specified and directed.

Treating ends of steel posts, etc with coal tar (embedded portion of pole in concrete) area of tarring exc 0.10sqm but n.exc 0.50sqm, complete all as specified and directed.

M & L two coats of synthetic enamel paint over red oxide primer on new steel surfaces of any description over 10 cm in width or girth not otherwise described including preparation of surfaces complete all as specified.

M & L two coats of synthetic enamel paint over red oxide primer on new steel surfaces of any description not exc 10 Cm in width or girth including preparation of surfaces complete all as specified.

Clearing away all Vegetation and sapling , shrubs and trees n exc 30 cm girth and removing rubbish off the premises complete all as specified and directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out soft/loose soil complete all as specified and directed.

M&L for hardcore of broken stone or boulders, gauge not exc. 63mm, deposited, spread and levelled in layers not exc 10cm thick, watered and rammed to a true surface all as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base for flooring complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B1 using 20mm graded aggregate as in flooring (laid in alternate bays ) complete all as specified and as directed.

Providing and laying 60 mm thick factory made chamfered edges cement concrete paver block (Rubber Moulded ) of M-35 grade as per IS 15658:2021 with approved colour ,design and patter as in footpath , park ,lawn ,driveway , or light traffic parking , etc of required strength thickness and size made by table vibratory method using PU mould laid in required color and pattern over and including 25 mm thick compacted bed of coarse sand , compacting and proper embedding / laying of interlocking paver blocks into the sand beddings layer through vibratory compaction by using plate vibrator , filling the joints with fine sand and cutting the paver block as pewr required size and pattern , finishing and sweeping extra sand complete

M&L for forming embankments inlc raising (or lowering) earth, spreading in layers n exc. 30cm thick,watering ,ramming /rolling and finishing to reqd size, shape etc n exc 1.5m high from base complete all as specified. Note:- Contractor shall use the excavated soil of sludge tank for forming embankment . No extra payment shall be made for this purpose . For payment purpose 10% deduction shall be made on account of bulkage.

Taking down cement plaster incl racking out joints, hacking for key & scrubbing down with water etc complete all as specified.

Dismantling floor hearth or wall tiling incl cement mortar bedding complete all as specified.

M & L for Glazed ceramic Coloured tiles of Size 300X200X7 mm thick in Vertical Surfaces , set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 10mm thick rendering in CM 1:4 complete all as specified and as directed.

Roughninig surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc

M & L for non-skid ceramic Coloured tiles of 7-8 mm thick area of each exc 0.11 Sqm but n exc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, over and including 15mm thick cement sand screed bed in CM 1:4 complete all as specified and as directed.

Excavating over areas, n exc 1.5 m deep and getting out in Soft/Loose soil including ramming of earth complete all as specified and directed.

M&L RCC M-30 using 20 mm graded aggregate as in foundations,including rafts,footings,foundation beams,plinth beams,bases for columns ,etc; basement slabs, under-reamed piles and concrete.

M&L Brickwork work with sub class 'B' bricks straight or curved on plan exc 6mtr mean radius built in CM 1:6.

M&L for rendering 15mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M & L Brickwork with subclass ‘B’ brick tiles in brick-on-edge wall (less than half brick thick ) built in CM 1:3 complete all as specified and as directed

M&L rendering 10 mm thick in CM 1:4 on other than fair faces of concrete using water proofing compound @ 3% by weight of cement , finished fair and even (over brick tiles) Note:- Water Proofing Compound is Measured and Paid Separately.

Supply only Integral Water Proofing Compound

Excavating over areas, exc 1.5 m and n exc 3 m deep and getting out in Soft/Loose soil incl ramming of earth complete

M&L RCC M-30 using 20 mm graded stone aggregate as in walls , retaining walls , basement walls , ballast walls , and the like any thickness above top of footing incl attached pilasters and buttress complete all as specified

Complete dewatering and Complete desludging of existing raw water tanks up to FFL by vaccum process closed tankers, tractor driven and disposing off raw water and sludge to a distance exceeding 1.5km but not exc 5km at places incl continuos pumping/dewatering till the work has not been complete all as specified and directed

M & L for preparation of new plaster surfaces of wall and applying three coat of white wash all as specified and directed.

M & L for 75mm thick cement concrete 1:3:6, type C-2 using 20mm graded stone aggregate as in plinth protection and PCC paved area, finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L 75 mm thick Cement Concrete 1:2:4 , type B1 using 20mm graded Aggregate in Sub-Floors,Sub-Bases,Floors and Pavings etc ,finishing cement concrete surface even & smooth without using extra cement.

M&L Racking out joints/ Pointing to brick work in wall or bricks on edge in floors, surface channels, drains, roofs etc and pointing to brick walls in cement mortar 1: 3 finished even and smooth complete all as specified and directed by Engr-in-charge.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

M&L brickwork with sub class 'B' old size brick laid in brick on edges in walls and built in cement and sand mortar (1:4) and all as specified and directed

M&L for preparation of old painted steel or iron surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soots, moulds, moss and efflorescent salts and trading oil & greasy spots including cornices etc and applying two coats of cement base paint , white or tinted all as directed.

AP BUILDERS

A S CONSTRUCTION COMPANY

Ridhi engineers and builders

Siya constructions

UNITED SAINI BUILDERS

M/s Prem Associates