As per NIT

Clearing of heavy jungle including the cost of all materials, labour, lead, lift etc., complete.

Engaging JCB excavator for uprooting trees leveling the site & filling low lying areas on hourly basis.

Filling of M-sand including cost of all materials, lead, lift, labour and curing etc., complete

Flooring with Double Charged Vitrified Tiles 600 x 600 x 8mm of approved Quality, design & colour laid in cement mortar 1:3 -20mm thick including pointing with same coloured cement using 0.4kg/sqm, finishing the joints, including cost of all materials, labour, lead, lift, etc. complete.

PCC 1:3:6 concrete using 6 to 10 mm HBG machine crushed metal including cost of all materials, lead, lift, labour and curing etc., complete.

Flooring with anti skid tiles or equivalant also daddoing wall tiles to set in cement mortar 1:3 for bath and F.O.L flooring including cost of tiles, all lead, lifts, labour for fixing finishing neatly as per standard specification and as directed by the Engineer-in-charge tiles colour and shade to be got approved by the Executive Engineer before use.

Concreting in 1:1.5:3 mix 50mm thick using 6-12mm chips over concrete surface after removing the peel off/damaged concrete with nito bond EP as directed by Engineer at site including the cost of all materials, labour, lead, lift, T&P etc., complete( for screed concrete) and laying white coloured solar reflective cooling ceramic tiles of size 305x305x7 mm approved and branded quality for roof slab to set in cement mortar 1:3 by weight of cement and pointing the tiles with water proofing epoxy powder including cost of all materials and complete as per standard specification including dismantling of existing weathering tiles.

Patch special lastering(patch plastering) with C.M:1:3, 20mm thick including cost of all materials, scafolding, lead, lift etc complete.

Painting the inside and outside walls with one coat of primer and applying 2 coats of wall putty & scrapping and two coats of Emulsion paint in approved colour for inside walls including cost of all materials, scaffolding etc., complete.

Painting new steel work with two coats of enameled paint over a coat of red oxide [colour and brand should be got approved by Executive Engineer] including cost of all materials, lead, lifts, labour, etc, complete.

Supplying and fixing in position of anodized Al. glazed sliding window of size 1.18 x 1.48m as per ISS 1038-1958 (1245 ISS) using Al. sections window frame bottom two track sliding 61.85 x 31.75 x 1.50mm @ 0.909 Kg/m, top & side 61.85 x 31.75 x 1.50mm @ 0.784 Kg / m shutter plain out side 40 x 18 x 1.55mm @ 0.547 Kg /m shutter inner lock 40 x 18 x 1.45 mm @ 0.607 Kg /m shutter runner top & bottom 40 x 18 x 1.55mm @ 0.547 Kg / m with glazing clips rubber gaskets sliding wheel & 4 mm tk plain glass including cost of all materials, lock arrangements labour, lead, lift, etc., complete.

Supplying and fixing in position of aluminium anodised colour matt finish fixed type Ventilator of size 0.6x0.6m Ntype using extruded anodised aluminium sections in accordance with ISI 1868/1962 specification for an average anodic film thickness of not less than 15 microns of 63mm*37mm at 0.85kg/m with 4mm thick plain glass fixed with aluminium beading, rubber lining etc. including cost of all materials ,lead, lift and labour for fabricating and fixing in position, making holes in RCC columns , beams, masonry wherever necessary to the extent required and made good to the original condition after fixing as directed by the Department Engineer-in-charge etc., complete.

Supplying and fixing of wooden door including cost of all materials, wood, wrought and put up, labour charges and painting with one coat wood primer etc., complete

Supplying and fixing of steel door(single leaf) with following specification.MS angle of size 40x40x6mm at 3.5kg/m used for outer frame and MS angle of size 35x35x5mm at 2.6kg/m for shutter frame. Stiffeners with 32x6mm at 1.5kg/m MS Flat is provided as the lock rail of the door and welded intact on both ends to the shutter frame. 18G GI sheets of best quality is laid as panel as the shutter frames. 18x5mm at 0.7kg/m MS Flat is welded over the 32x6mm at 1.5kg/m MS Flat on the rear side of the door sandwiching the CR sheet for rigidity.Additional stiffeners with 18x5mm at 0.7kg/m MS flat are provided diagonally on the rear side of the shutter. 300mm length of hinges 2 nos. for shutters is provided. 6nos of 200mm length hold fasts specified at the ends are welded to the outer frame of the door.Tower bolt 2nos. at the top provided 250x16mm size two aldrops are provided in single leaf door at lock rail section in the door for inner and outer with required locking arrangements and MS handle of heavy duty. All members are given one coat of red oxide primer.The rate includes cost of all materials, labour, lead, lift etc., complete(1.00mx2.20m size single leaf)

Supplying and fixing of PVC door of size 1.18x2.1m with frame single leaf flush door including cost of all materials, wood, wrought and put up, labour charges and painting with one coat wood primer etc, complete as per direction.

Supplying, laying and jointing of PVC pipes of approved brand and ISI quality for waterline, sewerline, and rainwater downfall pipe etc., including cost of all materials and all PVC specials, fixing the pipes Conceiled/over BM/CC surfaces by taking grooves and fixing wooden plugs, screws firmly with special clamps as directed and HDPE pipes for Borewell.

110mm dia PVC Pipe 6kg/sqcm

32 mm dia PVC pipe 10kg/sqcm

25mm dia PVC pipe 10kg/sqcm

Supplying and fixing inposition of GM gate valve best quality such as leader, zeolite, zenith including cost of all special fixtures lead, lift,etc., complete.

32 mm dia GM Gate valve

Supplying and fixing of 1000 lit capacity sintex tank of approved quality including cost of materials labour for fixing lead lifts etc., complete

Supply and fixing of MS grill for gates , Wicket gates ,Windows and ventilators incluidng the cost of fabrication, transporting, and painting lead, lift, etc., complete.

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with MS switch Box and 5A FT switch with painting of suitable colour continuous earth wire connection of 14 SWG TC wire for light/ fan / bulk head fitting points

Wiring with 2 x 1.5 sq.mm. (22 / 0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with 150mm x 100mmx75mm MS switch box for 5A 3 pin non interlocking flush type CS plug wfth painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open plug point

Wiring with 2 x 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable heavy gauge MS conduit pipe concealed in wall and ceiling with MS accessories in flush with wall with 150mm x 100mm x 75mm MS switch box concealed type with 3mm thick hylum sheet cover for 15A 3 pin flush type non interlocking CS plug with continuous earth wire connection of 14 SWG TC wire and rnaking good of the concealed portion with suitable colour for concealed power plug point.

Supply and run of 2 of 1.5 sq.mm. (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 14 SWG TC wire with painting of suitable colour.

Supply and fixing of LED light fittings

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper cable of 1100V grade in suitable heavy gauge MS coundit pipe on wall and ceiling with continous earth wire connection of 14 SWG TC wire with painting of suitable colour

Supply and fixing of 450 mm (18") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall.

Supplying and fixing of 1HP Centrifugal monoblock water pump with ISI mark(single phase) with crompton/Havells or equivalent including cost of motor, flexible PVC hose with necessary accessories to run the motor in good condition, cost of labour, lead, lift etc., complete

Supplying and fixing of water closet with ‘P’ or ‘S’ trap with double flapped seat and seat cover with brass hinges and 10lit capacity PVC low level flushing tank with all fittings including cost of all materials,all leads, lifts, labour for fixing etc, complete as per standard specification.

Indian water closet

European water closet

Supplying and fixing of White glazed 550mm x 400 mm wash basin (ISI quality of approved brand) with all accessories such as C.I. brackets, C.P waste coupling, rubber plug and chain and all connection of water inlet and waste water connection , CP Angle cock. nylon connection, brass nipples,C.P.pillar tap etc., including CP soap container and 5mm thick mirror best quality approved brand. Mirror should be framed in anodized aluminium frame 2"x16" of size complete as per standard specification and as directed by engineer.

Lipped Mouth Porcelain Flat Back Urinal with all accessories such as 32mm dia Bell Mouth PVC Connection, 15mm dia GM Wheel Value, 15mm dia 'B' Class GI Waste Water Pipe, 15mm dia Nylon Connection, 15mm dia Brass Nipple etc.

Supplying and placing of Pre cast RCC well rings having inner dia 1.80m, thickness 50mm and 300mm depth with cover, including cost of 8mm RTS rods-3nos longitudinally and 20cm c/c vertically including cost of all materials, dewatering, lead and lift etc., complete

Supplying, fabricating and fixing of new Galvalume sheet & wall cladding for roofing & side closing of approved colour and quality JSW or equivalent 0.47 G with steel structures for verticle 100x100x4mm, horizontal 100x50x4mm and purlins 50x50x4mm with base plate, bolt and nuts, providing wherever need openings with doors & windows etc., including fabrication, transporting and fixing charges, approved quality self threaded screws and bitumen washers including cost of all materials, lead, lift, labour, fixing in position etc, complete as directed by the Engineer at site.

GST for bidders outside TamilNadu (IGST)