Construction of Departmental Boundary Wall of Malhipur Patna Colony- Ist and IInd, District- Shrawasti.

Amount

Removal of barbed iron wire fencing including making it to the roll including labour T&P etc. required for proper completion of the work also excluding supply of wire and posts and its storage/disposal as per direction of the engineer in charge, including cost of all material, labour and T&P etc required for proper removal but excluding GST.

Dismantling reinforced cement concrete including stacking of dismantled materials within a distance of 60M. excluding fencing wire and its storage/disposal as per direction of the engineer in charge, including cost of all material, labour and T&P etc required for proper Completion of work but excluding GST.

Earth work in excavation in foundation in all type of soil including lead up to 30 m and lift up to 1.5 m. and its disposal as per direction of the engineer in charge, including cost of all material, labour and T&P etc required for proper completion of work but excluding GST. i-For Boundry wall

ii-For Drain Culvert

Laying Plain cement concrete in 1:4:8 in foundation, with stone Ballast 4.75 mm - 20 mm with coarse sand (F.M. not less than 2.0) and cement including cost of all material labour T&P etc. required for proper completion of work as per direction of Engineer in charge but excluding GST. i-For Boundry wall

ii-For Drain Culvert

Centering and shuttering for RCC work including cost of all material,labour T&P etc. required for proper completion of work as per direction of Engineer in charge but excluding GST. i-For Boundry wall

ii-For Drain Culvert

Cutting, bending, binding & placing of steel reinforcement in position for RCC work including cost of all material, labour, T&P and binding wire etc. required for proper completion of work as per direction of Engineer in charge but excluding GST. i-For Boundry wall

ii-For Drain Culvert

Laying R.C.C. in 1:1.5:3 (M-20) with coarse sand (F.M. not less than 2.0) and stone grit 4.75 to 20 mm size including cost of all material, labour and T&P etc. Required for proper completion of the work as per direction of Engineer in charge but excluding GST. i-For Boundry wall

ii-For Drain Culvert

Ist Class Brick masonary 1:4 Cement Mortar with coarse sand (F.M. not less than 2.0) including cost of all material, labour and T&P etc required for proper completion of work as per direction of Engineer in charge but excluding GST.

12 mm thick cement plaster on brick work in 1:4 CM with coarse sand (F.M. not less than 2.0) and cement including cost of all material, labour T&P etc. required for proper completion of work as per direction of Engineer in charge but excluding of GST. i-For Boundry wall

ii-For Drain Culvert

Two coats wall painting with acrilic smooth exterior paint of required shade over New Work two or mare coat of approved brand of manufacture to give an even shade, Royal/silk/Asian/ Berger after applying one coat of water thinable cement primer of approved brand and manufacturer on wall surface including cost of all material, labour, T&P etc. for proper completion of work but excluding GST.

Supply and fixing of Joint Filler Board 25 mm thick complete in all respect as per specification and direction of engineer-in-charge including cost of all material, labour, T&P etc. required for proper Completion of work but excluding GST.

Fabrication and fixing in position Steel Gate of 12 mm Square Bar and Equal Angle of Size 45x45x6 mm with Holds Fasts of specified dimension, tower bolt hinges etc. complete in all respect including cost of all material, labour, T&P etc. as per specification as per direction of engineer-in-charge required for proper Completion of work but excluding GST.

Painting two coat of synthetic enamel paint on new surface with superior quality approved make after applying one coat of red oxide primer on steel surface after sand papering and cleaning of surface including cost of all material, labour, T&P etc. for proper completion of work but excluding GST.

Earth work in clearance of drains with partial dressing, lead & lift as per item No. 1 above lead upto 30 Meters, lift upto 1.5 Meters excluding/Mechanical compaction but inclusive of manual compaction and dressing to profiles including cost of all material, labour, T&P etc but excluding GST.

Ist Class Brick masonary 1:6 Cement Mortar with coarse sand (F.M. not less than 2.0) including cost of all material, labour and T&P etc required for proper completion of work as per direction of Engineer in charge, also including all taxes but excluding GST.

Mohammad Abdulla (BID ID -5003448)

M/S SENGER CONSTRUCTION (BID ID -4998967)

M P Traders (BID ID -4998901)