Combined Package for Work A-Establishing 66kV SS at Bandri with associated lines and TBs Work B-Establishing 66kV SS at Kanchikere with associated line WorkC-Establishing 66kV SS at Narasimhagiri with associated line Wrok D-Establishing 66kV SS at G.Kodihalli with associated line Work E-Establishing 66kV SS at Madalagere with associated line Work F- Construction of 66kV LILO line to 66kV SS Venkatapura and 02 Nos of TBs at 66kV SS Venkapura

Grand Total weight of Tower parts- High Tensile Steel

Note:1. Rate to be quoted on per tonne Basis

Grand Total weight of Tower parts- Mild Steel

Note:1. Rate to be quoted on per tonne Basis

Grand Total weight of Bolts , Nuts& Washers

Note:1. Rate to be quoted on per tonne Basis.

Tower accessories :

1) Number Plates

2) Danger Boards

3) Circuit plate

4) Phase plate (Set of 3 No.)

5) Earth bond 300 mm long

6) Earth bond 450 mm long

7) Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation c...

Conductor & Earth wire :

1) Coyote ACSR Conductor with 1.5% sag

(40mts considered for Hagalwadi S/s Bay Portion)

Conductor & Earth wire :

2) Drake ACSR Conductor with 1.5% sag

(40mts considered for Hagalwadi S/s Bay Portion)

2) 7/3.15 mm GI Ground wire with 1.5% sag

I) Insulator strings and clamps for Coyote ACSR conductor with Hardwares and Arcing Horns as per technical specifications (66kV Line)

A. Tension insulator strings consisting of any one of the followin...

B. Suspension insulator strings consisting of any one of the following:

a.Suspension Insulator string consisting of 1X4nos. of 66kV, 90kN Disc insulators

II) Insulator strings and clamps for Drake ACSR conductor with Hardwares and Arcing Horns as per technical specifications (66kV Line)

A. Tension insulator strings consisting of any one of the followin...

Insulator strings and clamps for Drake ACSR conductor with Hardwares and Arcing Horns as per technical specifications

B. Suspension insulator strings consisting of any one of the following:

I.Hardware and clamps for Coyote ACSR conductor with Arcing horns.

1)Single Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 66kV, 90kN insulator to suit Coyote ACSR.

2)Double Tension Clamp with hardware and arcing horn suitable for 2x5nos. of 66kV, 90kN insulator to suit Coyote ACSR.

3) Single Suspension Clamp with hardware and arcing horn suitable for 1x4nos. of 66kV, 90kN insulator to suit Coyote ACSR.

3) Double Suspension Clamp with hardware and arcing horn suitable for 2x4nos. of 66kV, 90kN insulator to suit Coyote ACSR.

II.Hardware and clamps for Drake ACSR conductor with Arcing horns.

1)Single Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 66kV, 90kN insulator to suit Drake ACSR.

2)Double Tension Clamp with hardware and arcing horn suitable for 1x5nos. of 66kV, 90kN insulator to suit Drake ACSR.

3) Single Suspension Clamp with hardware and arcing horn suitable for 1x4nos. of 66kV, 90kN insulator to suit Drake ACSR.

Accessories for Coyote ACSR Conductor :

1) M S C Joints suitable for Coyote ACSR

2) Pre formed armour rods suitable for Coyote ACSR

3) Repair sleeves suitable for Coyote ACSR

4) P G Clamps suitable for Coyote ACSR

5) Vibration dampers for Coyote

Accessories for Drake ACSR Conductor :

1) M S C Joints suitable for Drake ACSR

2) Pre formed armour rods suitable for Coyote ACSR

3) Repair sleeves suitable for Drake ACSR

4) P G Clamps suitable for Drake ACSR

5) Vibration dampers for Drake ACSR

Hardware for Earthwire :

1) M S C Joints suitable for Ground conductor

2) Repair sleeves

3) PG clamps for Ground conductor

4) Single Tension clamps (bolted type) suitable for Ground conductor

5) Single Suspension clamps (bolted type) suitable for Ground conductor

Mand Spares Supply

Circuit Breaker (CB)

Closing coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Tripping coil with resistor (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Pad (For one Complete Circuit Breaker) for 72.5KV CB

Terminal Connector (For one Complete Circuit Breaker) for 72.5KV CB

SF6 Gas (40% of total gas Qty. of each Sub-Station) for Sub-Station at Madalgere

Copper Contact fingers male & female (For one Complete Isolator for 72.5KV class)

Terminal Connector (For one Complete Isolator for 72.5KV Class)

Terminal Pad (For one Complete Isolator for 72.5KV Class)

Station erection

Power Transformer: 20MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first filli...

CIRCUIT BREAKER : SF-6 Gas circuit breakers with Semi Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal conn...

2)For 66/11kV Power transformer

ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specifications with solid core cylindrical post insulators

I) 66 kV, 1250 A, 40 kA class d...

2)Upright mounting type without Earth switch.(LPH 6350mm)

3) Upright mounting type with Earth switch.(Live point height 4250mm) Suitable for single/twin Moose ACSR for TB at 220kV Badeladaku SS

4)Upright mounting type without Earth switch.(Live point height 5500mm) Suitable for single/twin Moose ACSR for TB at 220kV Badeladaku SS

5) Upright mounting type without Earth switch. (Live Point Height 4600mm).

Underhung without Earth Switch

Note:- For Isolators which are mounted on existing mounting structures, any modifications required to the mounting structures/dummy plate requirement if any, is in the s...

II) 11 kV Isolators

1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

2)11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications

1) 66 kV class, 40 KA,...

2) 66 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for Lines

Core - 1 : Vk-1600 V at 400A, 800 V at 200A, Rct 4 ohm at 400/1A, Rct 2 ohm at 200/1A Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy...

3) 66kV Class, 40kA CT of Ratio 800-400/1-1-1A [(Required for lines)]

Remarks: Terminal Connectors should be suitable for double Moose ACSR for 3 Nos. of main CTs

3) 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. of 75mmx8mm Copper ...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.

66 kV class 66kV/RT3/110V/RT3/ 110V/RT3/...

SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR as per technical specifications

1) 60 kV, 10 KA, SM type-for Over head lines

2) 60 kV, 10KA, SM type-for Transformer

3) 9 kV, 10KA station class with connector and clamp

Control and Relay Panel Complete -SCADA Compatible per specifications:

Simplex type control and relay panels complete as per specifications.

1) For Power Transformer 66/11 kV

2)For 66 kV Transmission line

1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.

2) The Accuracy class of metering c...

Relay & Protection Panels: C&R Panel compatible to IEC 61850, communication protocol for Sub-station Automation System, complete as per technical specification

3) 66 kV line - Type 6L (as per annexure...

Integration of 66kV C&R panel with existing SAS and bus bar scheme

Total Weight of Station structures & Mounting Structures (Including Bolts & nuts)

Total Weight of Station structures & Mounting Structures (Including Bolts & nuts) at 220kV Badeladaku SS

11) 11 kV ODS and take off structure :

Erection of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete ...

BUS BAR FORMATION :

Main bus/cross bus (all the three phases in a segment) using with Single Drake Conductor with fixing of insulator spacers, levelling of string conductors to the required height ab...

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical...

b) 63mm size connecting isolator to vertical tap

c) 50mm size connecting isolator to vertical tap

Post insulators- Cylindrical solid core Insualtors as per speciifcations.

1) 66KV Class, 1Unit/stack.

Auxiliary Transformer:

Erection of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) ...

Erection of DP structure with 9.5 mtr RCC poles, 11 kV 400 A double break isolators, 9 kV, 10 KA surge arrestor (3 No.), H-Frame along with DOLO/HG fuse unit, LTprotection kit/LTD box, LT Trivector me...

LTAC Distribution panel ( Indoor), 415V, comprising of Volt meter, Ammeter & 1 I/C MCCB 200A + 2 nos 3 phase, 63A O/G SFU with HRC fuse + 2 nos 3 phase 32A O/G SFU with HRC fuse + 6 nos 3 phase 16A SF...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

LT Power armoured UG cable as per specification:

1)1.1kV grade PVC Insulated armoured Alumimium cable with glands/lugs/ferrules 4c x 95 Sq.mm

ii. 70 Sq.mm 3.5 Core, with glands / lugs / ferrules

2) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrule 4c x 25 Sq.mm

3) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrules 4c x 10 Sq.mm

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

1) 19c x 2.5 Sq.mm

2) 14 C x 2.5 Sq.mm

3) 10C x 2.5 Sq.mm

4) 7 C x 2.5 Sq.mm

5) 4C x 6 Sq.mm

6) 4C x 2.5 Sq.mm

7) 4 C x 4 Sq.mm

8) 2C x 6 Sq.mm

a) ( At 66kVBandri Village for Station-1200 mtr & Yard Lighting-1000 mtrs,

b) At 66kVKanchikere for Station-1000 mtr & Yard Lighting-1000 mtrs

c)At 66kVNarasimhagiri for Statio...

9) 2C x 2.5 Sq.mm

SCADA Communication

Remote Terminal Unit RTU

Data Concentrator Unit DCU

2kVA online UPS (230V AC 1 ph 50 Hz) with battery set

Integration of RTU, DCU, and UPS with field equipmwnts

Multi Functional Transducer(MFT)0.2s Class

Current Cables-copper core with 4.0 sqmm cross section multistrand 4 core

Current Cables-copper core with 4.0 sqmm cross section multistrand 7 core for CT termination

Voltage Cables-copper core with 2.5 sqmm cross section multistrand 4 core for PT termination

Signal Cables - Armoured copper with 0.5 sqmm cross section multistrand 10 core

Control cable - copper core with 1.5 sqmm cross section multistrand 10 core

Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

11kV Switchgear:

A) 11kV, 25kA, Metal Clad VCB Switchgear (1600A for Incomer and 1250A for feeders), outdoor type, each comprising of 2IC+12F+1BC+4CB+1AP (Remote Announciation cum Control panel) with...

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

a.One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch ...

b.11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear.

c.11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

d.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

e.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

f.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

g.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

h.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

i.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

Earth Mat formation :

1) Supplying and laying of MS flat 75x12mm sizes, welding and applying ACB paint to welded portion and covering as per the drawing / standard specification and consolidatio...

2) Grounding of equipments with 75 x 12mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like ...

3)Grounding of equipments with 50 x 6mm GI flats and connecting equipments to earth mat or ground pit each point of earthing with all formation of works like ...

4) Providing 40 mm Dia MS round rod 1.075 Mtrs long Earth mat spike including, benting, top 50 mm overlap, flatening and making spike edge at one end driving into the earth ...

5) Grounding of Equipments by supplying and providing CI pipe of 100 mm ID, 13mm thickness, 2.75 mtrs long with 2 part clamps out of GI flat 50x6 mm continously welded al...

6) Supplying and providing 450mm dia and 450mm height 1.5to 2" thickness RCC Hume pipe collar (non pressure type) for earth pits including Transportion, all lea...

Providing deep bore earthing: Sinking bore of 150mm clear dia using fast rig including fixing of 40mm dia MS rod, including jointing the pipes as per KPTCL standards & providing sodium bentonite treat...

ii) 40mm dia MS rod (5 mtr)

iii) Bentonite clay

iv) Cost of GI flat for joining two rods by welding to obtain continuous length

Dismantling Portion:

Releasing and Re-erection of equipment:

i)Releasing and Re-erection of ISOLATOR

ii)Releasing and re erection of voltage Transformer

iii) Releasing of Lightning Mast structure (approx wt. 2.24 MT )

Note : 1) The Released materials shall be transported to the nearest KPTCL Projects Division Stores.

2)The rates quoted for releasin...

Check Survey and Towers Spotting.

Check survey using their own equipment for 66kV Plain terrain.

Note: For details refer Techno Commercial sheets

Conducting drone survey of Transmission lines for collection of data along with Aerial inspection of EHV line corridor using LIDAR method for measurements of vertical,horizontal and ground clearnace o...

Stringing of ACSR Conductor without allowing the conductor to touch the ground and without damaging the conductor as per specifications.

Paving out conductor from anchor to anchor normally spaced at 5...

2. Drake ACSR Conductor in Plain Terrian

3. 7/3.15 mm GI Ground wire Plain Terrian

Erection of Transmission Line Towers (including tower accessories etc., except GI angle, Barbed wire & Grounding materials) as per specifications.

1.The Bidders are required to quote the rates ...

Supplying and fixing AC devices:

i) Supplying and fixing GI angle iron 45 x 45x5mm (1Mtr length) with cleats, bolts nuts as per specification and fixing above 0.5 mts length each at inner and outer s...

ii) Supplying and fixing Barbed wire as per specification

Grounding of towers including cost of 40 mm dia 2.5 mm thick,class 'C' G.I. Pipe of 3 metres length as per specification with 50 X 6 mm GI Flats 3 metre long, salt, charcoal, including excavation char...

Dismantling Portion:

Note : 1) The Released materials shall be transported to the nearest KPTCL Projects Division Stores.

2)The rates quoted for releasing/dismantling shall also include the charges f...

ii) Releasing & Restringing of ground wire

Dismantling of existing super structure/tower materials

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricadin...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (Royalty shall be...

Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 ...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coarse aggregates and fine...

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m height....

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Providing and fixing Modular multi-diameter cable sealing system which is waterproof,fire proof& rodent proof consisting of frames,blocks and accessories to be installed wherever the electrical(power/...

Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of appro...

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm,aggregate cement rat...

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite/tra...

Wet Mix Macadam (Plant Mix Method): Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanica...

Providing and filling joint sealing compound as per drawings and technical specifications with coarse sand and 6 per cent bitumen by weight

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Constructing brick masonry chamber of internal dimension 450x450mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plaster...

Providing and fixing SFRC frame and cover conforming to IS 12592 (part-I)-1988 and IS 12592 (part-II)- 1991 with latest amendment, including cutting slabs to the required size for the opening and fixi...

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

Providing Brick work with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand) inc...

Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding,...

Providing 15 mm cement plaster on the rough side of single or half brick wall of mix 1:4 (1 cement: 4 fine sand) including rounding off corners wherever required smooth rendering, providing and removi...

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two coats on new work over an under coat of suitable shade with ordinary paint of appro...

Providing and Applying CFTRI approved two component flexible polymer modified acrylic cementitious waterproofing coating with a mix ratio of (5 Liquid :7 Powder) to the RCC surface like Roof, bathroom...

Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 ...

Providing edge moulding to 18mm thick Granite stone counters, vanities etc including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-charge

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding for Bathrooms: Toilet: Chemically exposed areas and jo...

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Iv...

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. With water thinnable cement primer on wall surface having VOC content less tha...

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 g/L of approved brand and manufacture, including applying additional c...

Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two coat applied @ 1.67L/10 m² over and including priming coat of exterior primer applied @ 2.20 kg/10 m²) with paint ...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Supplying PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 m...

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. ...

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the w...

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangula...

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangements of approved quality and colour. 600mm long towel rail with ...

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS: 12701 marked, with cover and suitable locking arrangment and making necessary holes for inlet, outlet and ov...

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.

Providng and fixing pillar cock with high neck with 265mm extended body made of stainless steel with all concealed fitting arrangements & all necessary accessories complete - Class Economy

Providing and fixing Angle cock light with wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 100 mm including the cost of materials, labour charges, required tools and plants etc., complete....

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...

Providing and fixing factory made UPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance (plus or minus 1mm), with wall thickness 2.0 mm ((plus or minus 0.2 mm)...

30mm thick factory made polyvinyl chloride (PVC) door shutter made of a uPVC hollow section of size 60x30mm and wall thickness 2 mm (plus or minus 0.2 mm), with inbuilt decorative moulding edging on o...

Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross- section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be...

Providing and fixing to existing door frames Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsatura...

Providing and fixing bright finished brass butt hinges with necessary screws etc. complete : 125x85x5.5mm (heavy type)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitt...

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direct...

Fencing with G.I. barbed wire Angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and...

Providing, Single Phase Submersible Pump Sets of 100mm dia (4 inch) suitable for bore well confirming to IS 8034-2000 specifications, to work site with testing of as per instructions of engineer incha...

Providing and fixing Rainy dual capacity self-cleaning roof top rain water harvesting filter or equivalent filter of FL-500 specification suitable for a catchment area of about 500Sqm.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Sinking borewell of 165mm dia. clear, using super fast hydraulic rig of capacity 300 PSIG & above 1100 CMF and above, in all strata of earth, including over burden upto 20M, fixing of casing pipes, co...

Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...

Providing and fixing MS casing collars as per IS 1239 (part-II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum). The dimensi...

Providing and laying at site of work MS casing caps as per IS 1239 (part- II) 1982 with all latest amendments if any for any dia. The thickness of plate used for covering one end shall be 3mm (minimum...

Geophysical investigation at site for sinking borewells for supplying drinking water to the habitation either through the Hand Pump MWS or P.W.S.S, by vertical electrical sounding by adopting Venner o...

Providing Submersible Pump Set of 150mm dia suitable for bore well and confirming to IS 8034-2000 ; 3Phase, SS Bowl & Impeller with Low volt Motor as per specifications, to work site as per...

SUBMERSIBLE CABLE :-

Supply and delivery at site Brand new best make PVC insulated cable of Flat 3 core (sheathed) of nominal cross sectional area as per IS 694-1990 with ISI Mark and as per its lates...

PRESSURE GAUGE :-

Supply and delivery at site of brand new best make pressure gauge bourdon type as per IS 778/1984 with ISI Mark and as per its latest amendments - Size 100 mm

Supply and delivery at site of brand new best make gate valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

NON - RETURN VALVE :-

Supply and delivery at site of brand new best make non-return valve as per IS 778/1984 with ISI Mark and as per its latest amendments Size 50 mm

ix) Control Panel BOARD-A :-

Supply, installing,testing and commissioning COMMON control panel consisting of the following INCOMING:1 No set of Phase indicating lamps with SFU of suitable rating 1 No,...

POWER CAPACITOR :-

Supply and delivery at site best indigenous brand new power capacitor as per IS 2834/1986 with latest amendments with KPTCL authorities and erection, electrification and commissioni...

Supply and delivery at site delivery of best indigenous brand new MCB (Miniature Circuit Breakers) of required capacity as per IS 88228/1978 and its latest amendments and with ISI Mark of 6/10/...

GALVANISED MILD STEEL TUBES :-

Supply and delivery of galvanized mild steel tubes of 6mtr standard length heavy duty (C Class) as per IS 1239 (Part-I) 1990 with latest amendments with ISI Mark (one...

Erection elctrification & Commissioning works of pumpsets :

Labour charges for Erection, Electrification and commissioning of Pump sets, including aligning and balancing of all items including supp...

Erection of panel board & meter board Unit :

Labour charges for erection of outdoor type panel board and meter board units with all necessary materials and labour, tools and equipmentsincluding provi...

Main connections:

Providing main connection from pole PVC insulated sheathed steel wire cable in new trench as per IS 1554/ 1988 with latest amendments with ISI mark from KPTCL pole to meter board un...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying heavy gauge PVC Conduit Pipe .... dia ....... mm thick with suitable size bends, metal junction boxes adhesive paste etc., by groove cutting in the wall and fixing by bracing U or J hooks an...

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 100 x 75 x 65 mm

Supplying and fixing sheet Metal box made out of 18SWG sheet metal with necessary holes for cable/conduit entry as required with one coat of primer of approved make etc. 135 x 75 x 65 mm

Supplying PVC flexible conduit pipe ....mm dia fixing on surface over inverted tapered wooden plugs or phill plugs or rawl plugs and clamped using heavy gauge saddles at an interval of 300mm using N...

Supplying And Fixing Metal Fan Box with Round Hook.

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth ...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth w...

Point wiring using Copper wire without switch.

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using copper PVC insulated multi strand 2x1.5Sqmm copper wire without...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Concealed Conduit System Supplying heavy gauge PVC conduit pipe ...... mm dia..........mm thick confirming to IS 2509 with suitable size bends, metal/PVC Junction boxes, adhesive paste etc., and runni...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 4...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall ...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 8...

Supplying and flush mounting powder coated / galvanized metal box suitable for mounting modular switch plates. The box should be firmly flush mounted after due groove cutting in Brick/Stone/C.C wall 1...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying & fixing of Porcelain fuse channel with cutout on existing wooden/panel using necessary nuts, bolts and washers. 100 A

Supplying of on load change over switches 4 poles,AC-23A Duty,415V,50Hz,AC Supply. With all accessories. (SMEnclosure Sheet Metal Execution) 100 A

Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood/panel board using necessary screws, bolts, nuts, necessary phase separators, handle and wiring complete. Protection of O...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing regular MCB distribution boards on wall / wood board / flush mounting using required clamps, bolts, nuts etc., with provision for fixing suitable type capacity MCB's single phase ...

Supplying, fixing andwiringResidualcurrentcircuitbreaker(RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 16A-25A 2 pole

Supplying, fixing and wiring Residual current circuit breaker (RCCB) 240/450V upto 300mA sensitivity on existing wood/ panel board. 63 A 4 pole

Supplying, fixing and wiring 0 to 1500amps CT operated AC analog type Ammeter With out CT

Supplying, fixing and wiring 3 Phase Digital Ammeter / Voltmeter

Supplying, fixing and wiring Electronic Trivector Meter (ETV) 5 to 32/63A three phase 4wire whole current class-1 Accuracy Energy Meter.

Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230/440VAC. 50 Hz 12/24V D.C.

Supplying, fixing and wiring earth leakage relay with core balanced current transformer suitable for single phase 50HzAC with latest micro controller based, digital read out of percentage leakage curr...

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Two Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Three Way socket

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 16A One Way Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 32A DP Switch

Supplying and fixing of modular switch & connected accessorieson existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

Extra for supplying 4 mm thick white plastic plate andcovering for junction boxes of size ...... mm conduit using necessary machine screws. 80/90 mm.

Extra for supplying 4 mm thick white plastic plate and covering for junction boxes of size ...... mm conduit using necessary machine screws.110 mm.

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board. 6A Pendant Holder.

Supplying & fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve, indicator ON/OFF, energy cross-3 with Short circuit breaking capa...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Supplying and fixing angle iron frame work fabricated out of M.S. angle iron.. And M.S. Flat......with bolts, washers etc., and painted with 2 coats of red oxide and then two coats of approved paint. ...

Fabricating supplying and mounting MS box made out ....SWG suitable for floor /wall mounting, fully weather proof with provision for better heat dissipation, provided with hinged front cover, equipped...

Fixing one exhaust fan after making a suitable notch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets, with bolts and nuts and a 5 A, ceiling rose with...

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 12" Sweep (300mm)

Supplying of 1440rpm heavy duty exhaust fan with bracket blades suitable to operate on 230V 50Hz, AC Supply complete. - 15" Sweep (450mm)

Supplying capacitor type ceiling fan complete with down rod blades, shackle, canopies etc., for operation on 230 volts, 50 cycles. Single phase AC supply conforming to ISS-374-1979 and with double ba...

Supplying wall mounting fan suitable to operate at single-phase 230v AC supply. 400 mm Sweep

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 4ft - 36/40 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 8...

Supplying of recess mounting non integrated type LED down light 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clA, LED of Power/COB with CCT...

Supplying of feet -PVC Batten with integrated LED tube LED light fitting 1 x 2ft - 9/10 W with high quality diffuser with Life of 25000 burning hours & 70% lumen maintenance with CRI greater than 80. ...

Supplying and Fixing of ---- mm dia class A GI pipe bracket upto 2 ms long bent at suitable angle and fixing to this bracket street light fitting of all capacities to GI or GI or rail or RCC pole / wa...

Fixing all types and all capacities of fluorescent /falseceiling/ spot light/CFL/LED fittings indoor on the wall/ceiling/rafters/girders using 23/0.0076" twintwisted PVC insulated wires, required No...

Fixing a ceiling/wall mounting fan of all capacities and all types to the existing 'S'' hook with fan regulator to the existing board together with supplying and fixing 5 A. ceiling rose, necessary le...

Extra length of GI pipe of class B 19mm dia for down rod.

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipments on the meter board using 40mm dia 2.90mm thick GI pipe 2.5 mtr long buried in a pit. The pit shoul...

Supplying fixing and wiring earth electrode for grounding of lifts, transformers, DG sets etc using 40mm dia 2.9mm thick 2.5 mtr long GI pipe with GI funnel with mesh and suitable size reducer fixed o...

GI/Copper strips for grounding connections, using necessary fixing materials as required. 600x600x3mm copper plate

GI/Copper strips for grounding connections, using necessary fixing materials as required. 25 x 3 mm Copper strip

Jelly Spreading (20-25 mm) : Supplying and providing jelly in the station yard of uniform thickness of 25 mm including the cost of materials, labour charges, required tools and plants etc., complete. ...

Prime Coat over WMM/WBM:

Providing and applying primer coat with SS1 grade Bitume Emulsion on prepared surface of granular base includin cleaning of road surface and spraying primer at the rate of 0.7...

Tack coat on Bituminous surface:

Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.20 kg/m2 on the prepared bituminous surface cleaned...

Bituminous Macadam Grading - I for traffic less than 20 MSA:

Providing and laying Bituminous Macadam with 100 tph capacity hot mix plant batch type using crushed aggregates of specified grading premix...

Bituminous Concrete Grading I for traffic less than20 MSA:

Providing and laying Bituminous Concrete with 100 TPH capacity hot mix plant batch type using crushed aggregates of specified grading, premix...

Supplying and fixing hylum plastic sheet 3mm thick with necessary nitches for fixing switches, regulators etc., and fixing on existing wood or metal box using N. F. screws.

Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...

Providing S&S RCC SPUN / VIBRATED CAST PIPES (REINFORCED) pipes NP-3 Class conforming to IS:458-1988 with latest amentments using ordinary portland cement, for sanitary works and conveying to work sit...

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, as per dr...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer- in...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Earth work excavation for Foundation by Mechanical means depth upto 1.50m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights, includin...

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite /trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant I...

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...

Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Station Supply Portion

Power Transformer:20MVA, 66/11kV, Delta/Star, Dyn11, 3-Ph, 50Hz, Core Type, 2 Winding Delta/Star transformer, vector group DYn11 with OLTC ONAN/ONAF with fan control cubicle, RTCC Panel, first fillin...

Nitrogen Injection fire extinguishing system-Supply, Erection & Commissioning of Nitrogen Injection Fire Extinguishing System for Power Transformer below 100 MVA, as per Technical Specifications.

CIRCUIT BREAKER : SF-6 Gas circuit breakers with Semi Pneumatic / Pneumatic operated / Spring type operating mechanism, including mounting structures arrangements with rigid, bi-metallic terminal conn...

2)For 66/11kV Power transformer

ISOLATORS : Isolators including marshalling box and suitable terminal connectors as required as per technical specifications with solid core cylindrical post insulators

I) 66 kV, 1250 A, 40 kA class d...

2)Upright mounting type without Earth switch.(LPH 6350mm)( rate of LPH 5500mm is considered)

3) Upright mounting type with Earth switch.(Live point height 4250mm) Suitable for single/twin Moose ACSR for TB at 220kV Badeladaku SS

4)Upright mounting type without Earth switch.(Live point height 5500mm) Suitable for single/twin Moose ACSR for TB at 220kV Badeladaku SS

5) Upright mounting type without Earth switch. (Live Point Height 4600mm).

Underhung without Earth Switch

Note:- For Isolators which are mounted on existing mounting structures, any modifications required to the mounting structures/dummy plate requirement if any, is in the s...

II) 11 kV Isolators

1) 11KV isolators, Double Break 400A, 25KA capacity with rigid bi-metallic terminal connectors suitable for coyote ACSR for Capacitor Bank

2)11 kV isolator, single break 400 A, 25 KA capacity with Roaster switch, with rigid bimetallic terminal connector suitable for coyote ACSR.

CURRENT TRANSFORMER : Current transformer Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications

1) 66 kV class, 40 KA,...

2) 66 kV class, 40 KA, CT of ratio 400-200/ 1-1-1A for Lines

Core - 1 : Vk-1600 V at 400A, 800 V at 200A, Rct 4 ohm at 400/1A, Rct 2 ohm at 200/1A Accuracy class PS-Dist/Dif

Core- 2 : 10 VA, Accuracy...

3) 66kV 40kA CT of Ratio 800-400/1-1-1A [(Required for lines)] @ 220kV Badeladaku SS

Remarks: Terminal Connectors should be suitable for double Moose ACSR for 3 Nos. of main CTs

Note:- For CTs which ...

3) 11 kV class, 25 KA, NCT of ratio 1200-800/1-1A for REFR protection(of similar rating and ratio as that of Incomer of 11kV switchgear) with terminal connector suitable for 2 Nos. of 75mmx8mm Copper ...

VOLTAGE TRANSFORMER : Single phase, oil filled outdoor type with rigid bimetallic terminal connectors suitable for Drake ACSR as per technical specifications.

66 kV class 66kV/RT3/110V/RT3/ 110V/RT3/...

SURGE ARRESTOR : (Procelain housing) metal oxide, Gapless type with rigid bimetallic connectors suitable for Drake ACSR as per technical specifications

1) 60 kV, 10 KA, SM type-for Transformer

2) 60 kV, 10KA, SM type-for Overhead lines

3) 60 kV, 10 KA, class - II,

3) 60 kV Metal Oxide with surge counter Arrestor class : Discharge Class 3 (Station Medium Duty (SM)) @ Badeladaku SS

Remarks: Surge Arresters are with Surge Monitors & Insulating Base

Note:- For Surg...

3) 9 kV, 10KA station class with connector and clamp

Capacitor Bank: Design, Engineering, supply, erection, testing & commissioning of 2.9 MVAR, 12.1 kV Capacitor Bank, star connected, Double Bank with internal fuses, terminal connectors with suitable n...

Control and Relay Panel Complete -SCADA Compatible per specifications:

Simplex type control and relay panels complete as per specifications.

1) For Power Transformer 66/11 kV

2)For 66 kV Transmission line

1) All the C&R panels and associated panels shall be of one and same make for uniformity and interchangeability of components.

2) The Accuracy class of metering c...

Relay & Protection Panels: C&R Panel compatible to IEC 61850, communication protocol for Sub-station Automation System, complete as per technical specification

3) 66 kV line - Type 6L (as per annexure...

Total Weight of Station structures & Mounting Structures (excluding Bolts & nuts)

Total Weight of Bolts & Nuts of Station structures & Mounting Structures

11) 11 kV ODS and take off structure :

Supply of Double pole structure with 9.5 Mts. RCC poles WL 300 Kgs for mounting 11 kV 400 A Roaster Isolators and 9 kV, 10 KA surge arrestor (3 No.) complete se...

Supplying & erection of Double pole structure with 9.5mtr RCC Poles, 11kV 400A Double Break isolators,9kV, 10kA Surge Arrestor (3No), H-frame along with DOLO/HG fuse unit, LT Protection kir, LTD bos,...

BUS BAR FORMATION :

1) Drake ACSR-66kV Side

2)Coyote ACSR-11kV side

4) Earth wire 7/3.15 mm steel with clamps/Lugs

Rigid bus with taps & clamps:

i) Aluminium pipe conforming to 6340WP of IS - 5082 / 1969 (BS I600-Sch. 40) inlcuding fixing of clamp, connector jumper ,corona ring etc., complete & as per technical...

b) 63mm size connecting isolator to vertical tap

c. 50mm Size connecting isolator to vertical tap 66kV Side

ii) Straight taps suitable for 63mm Aluminium tube (BS-1600) of 1750mm vertical height for vertical portion & cross bus on 66KV side with rounded off end.

iii) A) Post insulator clamps suitable for 75 mm Aluminium pipe & Post insulator solid core type - 66kV side

b)Expansion Type

iv) Corona Bell Suitable for Aluminium Pipe of size 75mm on 66kV

v) End cap suitable for 63 mm Al tube

vi) End cap suitable for Aluminium pipe of size 50mm on 66kV side

A) Post insulators- Cylindrical solid core Insualtors as per speciifcations.

1) 66KV Class, 1Unit/stack.

B) 11kV,90 KN,Disc Insulators:66kV side- Single Suspension (6 strings) & Single Tension strings (03 strings) of 9 units each - (09 Strings)

A. 11kV,120kN Disc Insulator

Tension strings: strings of 6 Units

11KV, 90KN Disc Insulator

66 KV side (Suspension string: string of 6 Units)

C)HARDWARES & CLAMPS :

i) C Type wedge connector suitable for Drake - Coyote (Line)

ii) C Type wedge connector suitable for Drake -Drake

iii. ‘C’ Type Wedge connector suitable for Moose to Moose ACSR (66 kV Side)

iv. ‘C’ Type Wedge connector suitable for Panther/Lynx/ coyote to Moose (line bay)

vi) Post insulator clamp suitable for Drake ACSR and 66kV Solid core insulator.

viii. Bolted Type tension clamp to suit Moose ACSR 66kV Side

ix. Bolted type suspension clamp to suit Moose ACSR 66kV Side

x) Bolted Type tension clamp to suit Drake ACSR 66kV Side

xi). Bolted type suspension clamp to suit Drake ACSR 66kV Side

Auxiliary Transformer:

Supply of Station Auxiliary Transformer-copper winding with oil, outdoor type, 100 kVA, 11 kV/433 V, 3 Ph, Vector group Dyn 11 off load tap changer(5 taps) wi...

LTAC Distribution panel ( Indoor), 415V, comprising of Volt meter, Ammeter & 1 I/C MCCB 200A + 2 nos 3 phase, 63A O/G SFU with HRC fuse + 2 nos 3 phase 32A O/G SFU with HRC fuse + 6 nos 3 phase 16A SF...

AC Distribution box (outdoor) Single front type with 6 terminals 1200 x 1350 x 300 mm one I/C of 100 A MCCB 20 KA+ 6 O/G 16 A MCB +1 O/G of 100 A HRC Fuse panel 415 V outdoor type

ii. AC Distribution Box Single front (Outdoor type), 6 terminals, 750 x 1350 x 300mm, 1 I/C of 100A, MCCB 20KA+6 0/G MCB 16A + 1 O/G of 100A, HRC Fuse Complete as per specification..

LT Power armoured UG cable as per specification:

1)1.1kV grade PVC Insulated armoured Alumimium cable with glands/lugs/ferrules 4c x 95 Sq.mm

2) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrule 4c x 25 Sq.mm

3) 1.1kV grade PVC Insulated armoured Copper cables with glands/lugs/ferrules 4c x 10 Sq.mm

4) (a) PVC insulated Aluminium power cable (AC Supply for lighting and DFDB/SFDB etc.,)

70 Sq.mm 3.5 Core, with glands / lugs / ferrules

(Rate of 4Cx70sqmm cable is considered)

STATION BATTERY & BATTERY CHARGER :

110V, 200AH Battery set (Plante/Grid/Nickel Cadmium Type) with cells & accessories as per technical specifications

Battery charger- suitable for '1 X 110 V, 200 AH, Battery set (Plante/Grid/Nickel Cadmium Type)consisting cells as per specifications- 15 A float and 30 A boost (with float and boost battery charger ...

LT DC Distribution panel (Indoor) as per Technical specification comprising of Earth fault indicator, Indication circuit for AC main failure, 1 No 100A SFU for IC + 12 nos., 32A SFU for OG etc,. compl...

1.1 kV Grade PVC Insulated armoured copper control cables of sizes,with Lugs/Ferrules/Gland as per technical specifications

1) 19c x 2.5 Sq.mm

2) 10C x 2.5 Sq.mm

3) 4C x 6 Sq.mm

4) 4C x 2.5 Sq.mm

5) 2C x 6 Sq.mm

6) 2C x 2.5 Sq.mm

7) 14 Core 2.5 Sq.mm

8) 7 Core 2.5 Sq.mm

9) 4 Core 4 Sq.mm

11KV U.G. Cable with the required cable terminations at both ends as per specifications.

a.One run of 11kV, XLPE 95 sq.mm Al., 3 core cable - (to be run for Auxiliary Transformers from 11KV switch ...

b.11KV XLPE cable, 1000Sq. mm. Aluminium cable from 66/11KV transformers to 11KV Switchgear.

c.11KV XLPE cable, 240Sq. mm. Aluminium cable 3 Core to be run from 11KV Switchgear to 11kV take off DP Structure.

d.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable ( Indoor type )

e.Heat shrinkable type Cable termination kits suitable for 1 x 1000 Sq.mm XLPE cable (Out door type)

f.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable ( Indoor type )

g.Heat shrinkable type Cable termination kits suitable for 3 x 240 Sq.mm XLPE cable (Out door type)

h.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable ( Indoor type )

i.Heat shrinkable type Cable termination kits suitable for 3 x 95 Sq.mm XLPE cable (Out door type)

FIRE FIGHTING EQUIPMENTS WITH NECESSARY MOUNTING STANDS:

1.Foam type extinguisher (Mechanical) 50 Ltr. capacity

2.Foam type extinguisher (Mechanical) 9 Ltr. capacity

3.Water type (gas pressure type) 9 Ltr. capacity

4.Carbon di-oxide type 4.5 kg Capacity

5.Sand type G.I Buckets 15 Ltr. Capacity

6.Steel stands for above to have 4 buckets to each stand.

Maintenance Tools and Plant:

1. Portable (mobile) oil pumps (1/2 HP Air pump 500 to 1000 gallons)

2. Telescopic ladder Aluminium 6 Mtr. Height

3. Ring spanner set (12 Nos per set)

4. Tube spanner set (12 Nos per set)

5. Pipe wrench 24 inch

6. Pipe wrench 18 inch.

7. Hydraulic crimping tools up to 1000 Sq.mm

8. Rubber hand gloves (15 kV tested)

9. Rechargeable 5W LED hand torch

10. Insulated cutting plier 12 inch size

11. Insulated cutting plier 8 inch size

12. Line live tester AC/DC 500 V

13. Screw driver 18"

14. Screw driver 12"

15. Hammer 8 lbs

16. Hammer 2 lbs

17. Chain pulley block 5 ton capacity

18. Hydraulic jack 5T capacity

19. Pipe derrick suitable for lifting 3 MT and lift of 6 Mtr. Height

21. Box spanners (12 Nos per set)

22. Transil oil di-electric break down (with 2.5 mm gap 0-60 kV) Tester.

23. Insulation megger 2.5 - 5 kV

24. Insulation megger 500 V

25. SF-6 gas leak Detector

26. Multimeter electromechanical

27. Multimeter Electronic

29. DC Voltmeter range -5V to + 5V

30. Hydrometer syringe suitable for vent holes

31. Specific gravity correction chart

32. Thermometer with wall mounting holder

33. Rubber appron

35. Protective goggle

36. Acid resisting jars (4 pint capacity)

37. Rubber shoes knee height

38. Glass funnel

39. Grounding sticks extendable upto 18 ft

40. Wall mounting type holder for hydrometer

MISCELLANOUS ITEMS

1.Rubber mats 2000 mm x 1000 mm x 12 mm size

2.First aid box.

3.Shock treatment charts, hard board, laminated with coloured pictures & literature both in Kannada & English.

4.Water filter / Water purifier : Wall mounting type (Aqua-guard type).

5.Sub-station name board duly painted.

6.Fixograph of size 1.5m x 2.5m with English / Kannada alphabets.

7.Brass cupboard locks 6 Levers (reputed make of approved quality) 75mm size

8.Danger Board (Prohibited) with support structure including fixing in front of the gate

9.Equipment name plates and earthing name plates including fixing at outdoor yard

10.Equipment name plates and earthing name plates including fixing at outdoor yard

Furniture for Control Room Staff and maintenance staff

1.Steel Almirahs 6 1/2 feet

2.Steel Almirahs 6 1/2 feet with glass panel doors

3.Officers tables

4.Steel Slotted angle rack (big Size)

5.Steel Slotted angle rack (small Size)

6.Steel dustbins

7.Executive revolving chairs

8.S’ Type Arm Chairs

9.Steel folding Chairs

Equipments for establishing SCADA Communication as per Technical Specification :

1) Remote Terminal Unit (RTU)

2) Data Concentrator Unit (DCU)

3) 2 kVA online UPS (230 V AC 1 phase 50 Hz) with Battery set

4)For Integration of New Bay to existing SCADA System

i)Multi Funtional Transducer (MFT)0.2S class

ii)8 Channel 220/110 V Opto Coupler

5) Cables -Supplying

a.Current Cables-Copper Core with c/s 4.0 sq.mm Multistrand 4 Core

b.Voltage Cables-Copper Core with c/s 2.5 sq.mm Multistrand 4 Core

c.Signal Cables-armoured Copper Core with c/s 0.5 sq.mm Multi strand 10 Core

d.Control Cables- Copper Core with c/s 1.5 sq.mm Multi strand 10 Core

e.Supply Cables-Copper Core with c/s 4.0 sq.mm Multi strand 3 Core for AC input to UPS & UPS to RTU,conforming to KPTCL specifications.

f.Supply Cables-Copper Core with c/s 32.0 sq.mm Multi strand for Battery conforming to KPTCL specifications.

Note : Satellite Communication required will be arranged by SLDC.

g. Current Cables-copper core with 4.0 sqmm cross section multistrand 7 core for CT termination

STATION & YARD LIGHTING (OUTDOOR) (To be designed, assessed & quoted by the bidder): 1) Supply and installation/ Fixing/ Provision of Outdoortype Thermoplastic Modular Panel enclosure with transpa...

PVC Insulated Copper Control Cables 1.1 KV PVC insulated Copper Control Cable with glands/Lugs/ Ferrules etc as per technical specification.2C x 6 sqmm

Supply and installation/ Fixing/ Provision o f Outdoortype Thermoplastic Modular Panel enclosure with transparent Polycarbonate Lid, shockproof, IP65 (WeatherProof), rustproof, dustproof, waterproo...

Supplying and fixing sheet Metal box made out of 18 SWG sheet metal with necessary holes forcable/ conduit entry as required with one coat of primer of approved make etc.

(200mm x 200mm x 65mm)

Supplying and fixing of 6-32 A Single pole MCB

3) Supply & Fixing of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation. Lamp compartment comprising of anti glare clear diffuser with Injection ...