REPAIR MAINT OF STORAGE AREA ORP BLAST PANS AREA AND EM INSTALLATIONS IN TECH AREA OF AF STN GWALIOR

Amount

Surface dressing n exc 15 cm deep of filled earth over ORP and Blast pan & treverse walls all as directed by Engr-in-Charge.

S&F in repairs HDPE perforated GEO CELL mesh for slope protection of earth any shape with size (330-100mm) 1.50mm thick fixed to earth with necessary arrangements 'J' hooks & jointing clips including levelling & ramming earth to required gradient by using the existing traverse earth complete all as specified and directed. Make: Terrain Infratech, Geogical Structial Infra Pvt Ltd, Omega Construction etc.

Rough excavation by mechenical means not exceeding 1.50 m deep and getting out in soft/loose soil and Removing the excavated material exc. 1.50Km and upto total distance of 5 km and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick and finishing to required size, shape, etc. up to a height of 8.0 mtr high from base complete all as specified and directed.

M&L for PCC 1:3:6 Type B1 (using 20mm graded Stone aggregate) as in edges traverse wall and geocell, floor, plinth finished even & smooth complete all as specified and directed.

M&L for Raised pointing to random or polygonal rubble, uncoursed or brought upto courses including Raking out joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses etc complete all as specified and directed.

Demolition of cement concrete ( unreinforced) in Roofs, floors (other than ground floors), tiles including existing roof treatment (screed plaster,& tarfelt of any description) and removing to a distance exc. 500 m and n.exc. 5 Km from site complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate as in benching, kerbs and levelling course etc as in floor and roof complete all as specified and as directed.

M & L for 10 mm thick screed bed in cement mortar 1:4 mixed with using liquid water proofing compound as per manufacturers instructions (Note: Water proofing compound shall be measured and paid seprerately under respective item of "BoQ") and applying APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid over hot blown bitumen grade 85/25 conforming to IS-702 @ 1.2 Kg/Sqm over primed surface with bituminous primer @ 0.30liters/Sqm surface by forced application complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar PCC 1:2:4 all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cmx 20mm thick, machine pressed set jointed and pointed in neat cement slurry in roofs, over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Demollition of cement concrete ( unreinforced) including floor tile ground floors and pavings n. exc 15 cm thick below or above G.L complete all as specified and directed .

M&L for 25 mm thick PCC (1:2:4) type B0 (12.5 mm graded stone agg) as in sub base of flooring/tiling complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:3:6) type B1, using 20 mm graded stone aggregate as in Plinth protection and finishing the surface even & smooth with using extra cement complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for glazed ceramic Coloured tiles in vertical surface 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surface in cement moratar 1:4 complete all as specified and directed.

M&L for non skid joint free coloured ceramic tiles 7-8mm thick (Square/Rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the coloured tiles over 15mm thick screed in CM 1:6) complete all as specified and directed.

M&L for vitrified ceramic coloured tiles (square/ rectangular) 8-9mm thick area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tiles over 15mm th screed bed in CM 1:6 complete all as specified and directed.

Demolition of stone slabs and interlocking tiles of any description or thickness in floors, aprons etc laid in any type of mortor complete all as specified and directed.

M&L for 15-18 mm thick Granite (of any type) work rounded and polished at edges in floors, steps pillars, platform or oval shape wash hand basin including cutting to fit the WHB, partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm th screed bed in CM 1:6 complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed including taking down cement plaster on brick surface or stone including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for Preparation of newly plastered surface and applying a layer of wall putty to make the surface even and smooth and applying two coats of Exterior emulsion weater coat in camouflaging pattern on CCD scheme (Pattern as approved by GE) on surfaces of any type of building, wall, any surfaces, any height, incl preparation complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of chalk whiening (preparatory to distempering) white or tinted as approved all as specified and directed.

S&F 5mm thick solid PVC wall Panneling/lining any colour wood grains printed PVC pre laminated sheet, one side including beadings at top, bottom, corners of door window jambs of matching colour Jambs over inclusive of solvent cement and fixing at site over PVC fillets including dismantling of existing wall paneling with fillets complete all as specified and directed. Note: Colour, pattern and design as approved by GE.

M & L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed.

S&F in repairs 12mm thick acoustic mineral fibre micro perforated finish boards of approved pattern for fixinf to old GI grid complete all as specified and directed.

S&F in repair 10 litre capacity PVC valve less symphonic action type flushing cistern low level , white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), P- Type/ S-Type any colour (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed.

S&F in repairs PVC Seat cover for water closet pan (pedestal pattern), matching colour including fixing bolts complete all as specified and directed .

S&F in repair Vitreous China urinals half stall flat back white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including Brass CP waste coupling and with PVC waste pipe & Grating complete all as specified and directed.

S & F in repair vitreous china wash basin, white, flat back size 550 X 450mm including 32mm Brass CP waste Coupling, PVC Waste pipe and Grating complete all as specified and directed.

S&F 15mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed.

S&F 20mm bore medium grade galvanized iron tubing with all fittings e.g. socket, union, nipple etc. including cutting of pipe in required size , making threads etc. including taking down old unserviceable pipe, complete all as specified and directed

M&L for Cutting chases for concealed water tubing or concealed conduit wiring, etc. making good to facings where required and pointing in cement mortar 1:3 not exc 10 cm girth complete all as specified and directed.

S&F in repair for 110 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair for 75 mm bore PVC(SWR) pipes single socketed , in any length with rubber ring joints, laid in trenches ,floor or in wall complete all as specfied and directed.

S&F in repair 110mm PVC(SWR) bends complete all as specified and directed.

S&F in repair 110mm PVC(SWR) junction single, (Single T) eual or unequal complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed..

S&F in repair for PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair chromium plated fency type bib taps long body cast copper alloy with capston head handle screwed down screwed for iron pipe or for brass ferrule & fixed in 15 mm bore pipe complete all as specified and directed.

S&F in repair 15mm bore pillar taps, fancy type, chromium plated screwed down high pressure with or without lettered with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs Brass CP, fancy type 15mm bore Angle Cock with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 15mm bore two way Angle Cock brass CP fancy type with crutch or butterfly handle, screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs health faucet (ABS with 8 mm dia, 1.2 m long flexible tube and wall hook (allied) complete all as directed by Engr-in-Charge.

Dismantling of old PVC water tanks with float valve and S&F 500 litre capacity rotational moulded ploythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position with 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 210 g m s) complete all as specified and directed.

M&L for complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers and and applying a coat with putty to make the surface even and smooth matching to the adjacent wall surfaces and applying two coats distemper oil emulsion, over a coat of primer with roller complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F MS tubular pipes as in vertical post , rafter & purlins as in sheds/canopy cut to reqd shape , welding drilling and including bending as necessary , gusset plates, riveting , etc confirming to Fe-290 Gde-E-165 complete all as specified and as directed. Make: ISI Marked as approved by GE.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces,guard bar etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

M&L for preparation of new surfaces of steel of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide primer complete all as specified and directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensilestrength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified including Dismentling of existing Plain or corrugated steel sheeting, any gauge, thickness complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Ridge, valley/ gutter fixed with self tapping screws including Dismentling of existing Plain or corrugated steel /AC Sheet complete all as specified and directed.

Cutting existing kota stone floor over saucer drain without breaking and repair the edges with CM 1:4 including cleaning the coverd drain and laying existing kota stone over drain as covers all as directed by Engr-in-Charge.

S&F pre powder coated aluminium frame or shutter for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Demollition of reinforced cement concrete (reinforced) of any description and in any position not otherwise specifically provided and dispose off the demolished material out of defence land complete all as specifeid and directed.

M&L for RCC nominal mix 1:2:4 type B1 (using 20 mm crushed stone aggt) as in shelves, slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and the likec complete all as specified and directed.

Formwork to soffits of suspended shelves, slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed.

S&F Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm x160mm including PTMT sink waste coupling and waste pipe complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick in CM (1:4) complete all as specified and directed incl demolition of brick work in any position built in cement mortar including complete all as specified and directed.

M&L for 15mm thick rendering fare face of brick/stone masonry walls in CM 1:4 finished even and smooth (without using exrtra cement) complete all as specified and directed.

M&L for Preparation of newly plaster surface of wall and applying two coat of distemper oil emulsion over a coat of calk whiening (preparatory to distempering) white or tinted as approved all as specified and directed.

M&L for Preparation of old decorated surfaces of ceiling including cornices, by brooming down or steel wire brushing to remove dust, dirt and loose scales of lime wash and other foreign material, scrapping down, smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc including filling the cracks and depressions with putty and applying one coat of white wash complete all as specified and directed.

M&L for Preparation of old decorated surface of wall include brooming down with steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots, including filling the cracks and depressions and applying one coat of distemper oil emulsion with roller white or tinted as approved complete all as specified and directed.

M& L for stainless steel pipe of grade 304 of required height fixed to floor with suitable size stainless steel screws with stainless steel ball of approved design on top of stainless steel pipe and providing stainless steel chain 304 grade of weight not less than 0.30 Kg/RM fixed with hooks to stainless steel pipe duly welded all as directed by Engr in charge.

M&L for crack cutting & removing the concrete inside the crack line properly & maintain the groove size (50mm X25mm) of the building at any height and then aii crack properly filling with micro concrete renderocrg (FOSROC) and complete all as specified and directed.

M&L Injecting Conbextra EP10 (FOSROC) through the prefixed nozzles under pressure using grout pump to fill all possible pores and gaps left within the concrete mass of the bldgs of any height and when the flow of grout stops, or when the grout flows out of the adjacent nozzle,pumping is stopped and the nozzle is tied up and allowed to set for 24 hours. The PVC nozzles shall be sealed with a quick setting waterproffing ajent like renderoc plug. Grouting operation is carried out through the next nozzle till the entire area is covered. The grouting holes shall be finished by removing the nozzles and finishing flush with the surface complete all as specified and directed.

Sunil Traders (BID ID -3405738)

Kumar Sales Corporation (BID ID -3401383)

M/s United Construction Company (BID ID -3411818)

M/s. Ravi and brothers (BID ID -3405447)

R.B. ENTERPRISES (BID ID -3404800)