e-NIT No.05 / (EnM) M-7/ 2022-23, Item No.26

S/O 4x25 sq. mm PVC insulated & PVC sheathed Aluminum armored conductor cable confirming to IS: 1554 (Part-i) complete as required. Make: Havells/Grandlay/Gloster / DJB Approved

S/O 2.5mm2 x 4 Core copper conductor cable from the fixture to control gear box. Make:- Havells/Finolex/Standard / DJB Approved

S/O 200 W or equivalent new generation Energy saving, environmental friendly, long life, pressure die-cast Aluminimum IP65 flood light with highPC diffused lens enclosure over LEDs for glare free light.MAKE: Havells/ Bajaj/ Crompton/ Phillips/Orient DJB approved

Supply of 16 Meter height mast system with its accessories mast shaft shall be in one or two section, hot dip galvanized (single dip) Inside and outside and suitable for wind velocity as per IS: 875 (Part-III) there shall be only longitudinal seam weld. It should also include accessories for high mast i/c head from 3 point suspension system with steel wire rope 3mm dia. (7/19 construction) single drum winch, galvanized lantern carriage swangment suitable for 8 Nos. ( 1x200 watt) luminaries symmetrically and its control gear boxes and lighting final, the mast shall have compartment of its rising lowering operation with foundation bolts and anchor plate and control panel housing suitable for the mast considering the soft soil bearing capacity at site as 10T/sq. meter. At 2 Meter depth with all material.

Supply of 63 Amp. 415 volts switch fuse unit on angle iron frame for ON / OFF. Make: Standard / Havells / DJB approved

Earthing with G.I earth plate 600mmx600mmx6mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 meter long etc with charcoal/ coke and salt as required. SOR 35.1.4

Providing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning protective covering and refilling the trench etc as required upto 35 sq.mm. SOR 37.1.1

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2x25 sqmm (2mm).

Design and casting of RCC foundation suitable for erection of 16 Meter high mast i/c supplying and casting into foundation anchor plate and holding down bolts etc as required.

Supplying and fixing 6 amps. to 32 amps. Ratings, DP MCB “C” curve, 10KA breaking capacity. Double pole MAKE L&T/Havells/Hager/Bentax SOR43.7.4

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 2 + 6 way, Double door SOR 32.3.2.

Installation of high mast LED light on 16 mtr. Long pole with the help of nut & bolts etc. with all accessories, work including making its connection up to LED light to junction box. Safety and labour charges for installation of above work at a required height work including arranging all tools & tackles, T&P items, drill machine, safety belt, safety helmet, safety gloves etc. Testing & commissioning of complete high mast light in the presence of engineer in charge with full satisfaction.

Rajesh Kumar Jain and Sons