Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹80.4 LAdmitted-Finance | L1 | Admitted-Finance | |
| 2 | L2₹80.6 L+₹17,507.53 (0.22%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹80.8 L+₹34,004.71 (0.42%)Admitted-Finance 1651 15 GOVIND PURI KALKA JI NEW DELHI 110019 | NEW DELHI | NEW DELHI | DELHI | 110019 | L3 | Admitted-Finance | |
| 4 | Rejected-Technical | - | Rejected-Technical INVALIED |
| Sl No | Description | Qty | Unit | M/S. HOP ENTERPRISES L2 | aarav enterprises L3 | M/S. MAHESHWARI CONSTRUCTION L1 |
|---|---|---|---|---|---|---|
| 1.00 | Building work:- M & L for dismantling GS sheet roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead. | 405.72 | Sqm | 90,475.56 ₹90,475.56 | 90,881.28 ₹90,881.28 | 89,664.12 ₹89,664.12 Lowest |
| 2.00 | Providing and fixing of PPGI profile Sheet of 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm per sqm in 240 mpa steel grade as free for fixing, using self drilling/ self tapping screws of size 5.5x55mm with EPDM seal, complete to the existing truss and purlins etc complete. | 405.72 | Sqm | 4,29,657.48 ₹4,29,657.48 | 4,30,063.2 ₹4,30,063.2 | 4,28,846.04 ₹4,28,846.04 Lowest |
| 3.00 | Providing and fixing PPGI sheet ridges or hips of width (500- 600mm) overall width plain sheet of 0.50 mm (+0.05%) total thickness , zinc coating fixed 120grms per sqm as per IS :277 using self drilling or self tapping screws complete. | 83.79 | RM | 59,407.11 ₹59,407.11 | 59,490.9 ₹59,490.9 | 59,239.53 ₹59,239.53 Lowest |
| 4.00 | Dismantling cement asbestos sheets or other hard board in ceiling , including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. | 231.32 | Sqm | 18,042.96 ₹18,042.96 | 18,274.28 ₹18,274.28 | 17,580.32 ₹17,580.32 Lowest |
| 5.00 | Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster incl disposal of rubbish to the dumping ground within 50 mtr lead. | 211.79 | Sqm | 16,096.04 ₹16,096.04 | 16,307.83 ₹16,307.83 | 15,672.46 ₹15,672.46 Lowest |
| 6.00 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand). | 211.79 | Sqm | 1,58,630.71 ₹1,58,630.71 | 1,58,842.5 ₹1,58,842.5 | 1,58,207.13 ₹1,58,207.13 Lowest |
| 7.00 | Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand). | 15.93 | Sqm | 25,472.07 ₹25,472.07 | 25,488 ₹25,488 | 25,440.21 ₹25,440.21 Lowest |
| 8.00 | Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand) | 30.9 | Sqm | 17,304 ₹17,304 | 17,334.9 ₹17,334.9 | 17,242.2 ₹17,242.2 Lowest |
| 9.00 | Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead. | 1.68 | Cum | 966 ₹966 Lowest | 967.68 ₹967.68 | 9,646.56 ₹9,646.56 |
| 10.00 | Providing and fixing 12.5mm thick square edge Gypsum tile of size 595x595mm, made of Gypsum plasterboard and fixed in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel section, consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick ( minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in grid including required cutting/making, opening for services etc complete. Main T runner to be suspended from ceiling using GI slotted cleats od size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4 mm GI adjustable wire etc all complete with white colour tiles. | 231.32 | Sqm | 4,67,266.4 ₹4,67,266.4 | 4,67,497.72 ₹4,67,497.72 | 4,66,803.76 ₹4,66,803.76 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.5 L
Closing Date
24 Nov 2023, 10:30 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SO-I(Wks)
SO-I(Wks) ARTC and School Shokhuvi
Addition and alteration of B R works of existing JCOs Club (Bldg No P/154, 155/99 and P/203/02) at ARTC S, Shokhuvi (Nagaland)
2023_ARMHA_780449_1
28028/ARTCS/NIT/23-24/54
Open Tender
Civil Works
Works
365 days
Shokhuvi
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,500
Commandant, Shokhuvi
₹1.5 L
23 Jan 2024
11 Nov 2023
25 Nov 2023
13 Nov 2023
24 Nov 2023
13 Nov 2023
13 Nov 2023 - 23 Nov 2023
Building work:- M & L for dismantling GS sheet roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead.
Providing and fixing of PPGI profile Sheet of 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm per sqm in 240 mpa steel grade as free for fixing, using self drilling/ self tapping screws of size 5.5x55mm with EPDM seal, complete to the existing truss and purlins etc complete.
Providing and fixing PPGI sheet ridges or hips of width (500- 600mm) overall width plain sheet of 0.50 mm (+0.05%) total thickness , zinc coating fixed 120grms per sqm as per IS :277 using self drilling or self tapping screws complete.
Dismantling cement asbestos sheets or other hard board in ceiling , including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead.
Dismantling of old plaster or skirting raking out joints and cleaning the surface for plaster incl disposal of rubbish to the dumping ground within 50 mtr lead.
Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under incl cutting the patch in proper shape, racking out joints and plastering the surface of the walls, including disposal of rubbish to the dumping ground within 50m lead etc. complete with CM 1:4( 1 cement : 4 coarse sand).
Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand).
Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand)
Dismantling wood work in frames, trusses, purlins and rafters up to 10 metres span and 5 metres height including stacking the material within 50 metres lead.
Providing and fixing 12.5mm thick square edge Gypsum tile of size 595x595mm, made of Gypsum plasterboard and fixed in true horizontal level , suspended on interlocking metal grid of hot dipped galvanized steel section, consisting of main T runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick ( minimum) sheet, spaced at 1200 mm centre to centre and cross 'T' of size 24x25mm made of 0.30mm thick (minimum) sheet, 1200mm long spaced between main "T" at 600mm centre to centre to form a grid of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in grid including required cutting/making, opening for services etc complete. Main T runner to be suspended from ceiling using GI slotted cleats od size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4 mm GI adjustable wire etc all complete with white colour tiles.
Providing and laying vitrified floor tiles in Size of Tile 600x600 mm (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.
Providing and laying Vitrified tiles in Size of Tile 600x600 mm (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete.
Providing and laying non skid ceramic floor tiles of size 300x300mm ( thickness to be specified by the manufacturer) of approved make, in all colours and shades except white, Ivory, Grey laid on 20mm thick CM 1:4 (1cement :4 coarse sand), incl grouting the joints with white cement and matching pigments. etc. complete.
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
Providing and fixing of kota stone 25 mm thick slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
Providing and fixing of kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Granite of any colour and shade, Area of slab over 0.50 sqm)
Providing and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth.
M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand).
Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)
Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shade including removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete.
Distempering with oil bound washable distemper approved brand and manufacturer to given an even shad in old work (one or more coats) incl preparation of old surface by removing old paint by scrapping, sand papering incl necessary repairs to scratches etc complete.
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete.
Dismantling doors, windows shutters including chowkhats, holdfasts etc complete of area 3 sqm and below.
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars.
Providing and fixing factory made steel glazed windows and ventilators , side/top/centre hung , with beading and all members such FD7,F4B,K11B etc, including providing and fining hinges, pivots, including priming coat of approved steel primer of fixing with 15x3mm lugs 10cm long embeded in cement concrete block 15x10x10cm of cement concrte (1:3:6).
Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts complete of 0.63mm dia wire and 1.4 aperture on both sides.
Providing and fixing glass panes with putty and glazing clips in steel doors, windows and ventilators all complete with 4mm thick glass panes.
Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete.
Providing and fixing 25mm thick factory made laminated flush door shutters non decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete.
Providing and fixing factory made 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles as per manufacturer's specifications and direction of Engineer-in-charge.(Non decorative finish)
Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood.
Providing and fixing aluminium handles of size : 125 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete
Providing and fixing aluminium tower bolts of size : 150x10 mm with necessary screws etc. Complete.
Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm.
Providing and painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade.(On new wk)
Providing and painting one or more coats on old work with synthetic enamel paint of approved brand and manufacture to give an even shade.
Providing and fixing for weather bd 25 mm tk
Providing and fixing of curtain rods of 1.25mm thick chromium plated brass plate , with two chromium plated brass brackets fixed with CP brass screws and wooden plugs etc, wherever necessary complete of size 20mm dia.
Demolishing cement concrete nominal concrete 1:3:6 or richer mix manually/ by mechanical means including disposal of materials within 50 m lead as per direction of Engineer – In – Charge on roof slab.
Providing and laying of grading roof for water proofing treatment with cement concrete 1:2:4 with graded stone aggregates 20 mm nominal size
Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane
Soak pit:- Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design
50 User Septic Tank:- Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5m in width as well as 10 sqm on plan including disposal of excavated earth upto 50m and lift upto 1.5m in all kind of soil
Earth work in excavation by mechanical means(Hydraulic excavator)/ manual means in foundation trenches ( not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50m for all kinds of soil
Extra for every additional lift of 1.5m or part thereof in excavation/banking excavated or stacked materials
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering , all work upto plinth level 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregates 40 mm nominal size)
Providing and laying damp proof course 50 mm thick with cement concrete 1:2:4 ( 1 cement :2 coarse sand : 4 graded stone aggregates 20mm nominal size)
Filling available excavated earth ( excluding rock) in trenches, plinth sides of foundations etc in layers not exc 20 cm in depth, consolidating each deposited layers by ramming and watering lead upto 50 m and lift upto 1.5m
Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying up to plinth level reinforced cement concrete and the like, excluding the cost of centering , shuttering, finishing and reinforcement with 1:2:4 ( 1Cement : 2 Coarse sand : 4 graded stone aggregates 20 mm nominal size) in baffle wall
Providing and hoisting and fixing up to floor five level precast reinforced cement concrete work in Manhole chamber slab including cost of centering, shuttering but excluding cost of reinforcement with (1:2:4) mix with 20 mm nominal size graded stone aggregates
Centering and shuttering including strutting, propping etc and removal of form for suspended floors, roof slab
Centering and shuttering including strutting, propping etc and removal of form for vertical surfaces for baffle wall
Centering and shuttering including strutting, propping etc and removal of form in sides of roof slab
Steel reinforcement for RCC work including straightening, cutting, bending placing in position and binding all complete (TMT bars)
Providing and laying 20 mm thick Cement plaster 1:3 (1 Cement : 3 Coarse sand) finished with a floating coat of neat cement
Providing and laying 15 mm thick Cement plaster 1:4 (1 Cement : 4 Coarse sand) on rough side of single or half brick wall. (Out Side)
Providing and mixing water proofing materials in cement concrete work in doses by weight of cement as per manufacturers specification
Providing and fixing PVC vent pipe 75 mm dia with vent cowl fixing properly
Provn of Canopy :- M&L for excavating holes upto 0.50 cum including dressing of sides and ramming of bottoms, lift upto 1.5 m , including getting out the excavated soil and disposal of surplus excavated soil as directed, with in a lead of 50 m
M&L for PCC 1:2:4 for columns, pillars, piers etc
Steel work in built up tubular round sections for truss and wall cladding including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.with hot finished seamless type tubes
M&L for plastering ,15 mm thick in cm 1:4 over concrete surface
Providing and fixing of PPGI profile Sheet of 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm per sqm in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scrateches during transportation and should be supplied single length upto 12m or as desired by Engineer - In - Charge . The sheets should be fixed using self drilling/ self tapping screws of size 5.5x55mm with EPDM seal, complete to the existing truss and purlins etc complete
Drain :- Providing and fixing PPGI sheet ridges or hips of width (500- 600mm) overall width plain sheet of 0.50 mm (+0.05%) total thickness , zinc coating fixed 120grms per sqm as per IS :277 using self drilling or self tapping screws complete
M&L for two or more coats of synthetic enamel/painting over a coat of red oxide primer on steel surface after preparation of new surfaces
Earth work in excavation in fdn trenches incl dressing of sides and ramming of bottoms lift upto 1.5 m incl getting out the excavated soil and disposal of surplus excavated soil as directed with in a lead of 50 m in all kind of soil
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : (Use 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
M & L for brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: (Use cement mortar 1:4 (1 cement : 4 coarse sand))
M & L for cement concrete 1:2:4 in copping with necessary from wk
M & L for 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : (Use 1:4 (1 cement: 4 fine sand))
Paver block Foot Path:- Earth work in surface excavation by mechanical means (Hydraulic excavator) /manual means over areas (exceeding 30 cm in depth, 1.5 m in width aswell as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m, disposed earth to be levelled and neatly dressed in all kind of soil
Supplying and stacking at site.(Over burnt (Jhama) brick aggregate 90 mm to 45 mm)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering, all work up to plinth 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
Providing and laying 60mm thick factory made cement concrete interlocking paver block of M 30 grade made by block making machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand filling the joints with fine sand etc all complete as per the direction of Engineer – In – Charge
Half brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in superstructure upto plinth level in CM 1:4 (1 cement : 4 coarse sand)
Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand)
Plumbing &Senitary:- Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : (W.C. pan with ISI marked white solid plastic seat and lid)(Make - Hindware/Paryware/Hindustan)
Providing and fixing white vitreous pedestal type china wash hand basin (Size 630x450 mm) incl pedestal with C.I. Brackets, 15 mm C.P Brass pillar taps, 32 mm C.P. Brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required etc. complete.
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively.
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe.
Providing and fixing PTMT urinal cock of approved quality and colour.(15 mm nominal bore, 80 mm long, 42 mm high and 30mm wide with BSP female threads weighing not less than 48 gms)
Providing and fixing 32 mm dia flexible P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete.
Providing and fixing of 15mm nominal bore CP angle cock of approved quality.
Providing and fixing of 15mm nominal bore connection pipe of approved quality.
Providing and fixing of 15mm nominal bore CP bib cock of approved quality.
Providing and fixing of PTMT towel rail ring trapezoidal shape 215mm long, 200mm wide with minium distances of 37mm from wall face with concesled fittings arrangement of approved qaulity of 600mm long.
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.
Providing and fixing 600x450mm beveled edge mirror of superior glass ( of approved quality) complete with 6 mm thick hard board backing fixed to wooden cleats with CP brass screws and washers complete..
Providing and fixing C.P. brass toilet paper holder :
Providing and fixing 100 mm sand cast Iron grating for gully trap.
Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 100 mm dia.
Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 75 mm dia.
Construction of brick masonry manhole in cement mortar (1:4) with RCC top slap with (1:2:4) mix foundation concrete (1:4:8) mix inside plastering 12 mm thick with CM (1:3) finished with floating coat of neat cement and making channel in cement concrete (1:2:4) etc complete with common burnt clay FPS (non modular) bricks.
Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : (15 mm to 40 mm dia)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 40 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 25 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm dia pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed wk)
Cook House :- M/L for earth work in excavation in trenches n exc 1.5m deep and wide and getting out in soft soil.
Providing and laying in position PCC 1:3:6 in fdns, filling and mass concrete- All work up to plinth level.
M&L for brick work with F.P.S bricks of class designation 75 in foundation and plinth in cm 1:6.
Half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand).
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:(Cement mortar 1:6 (1 cement : 6 coarse sand))
Providing and laying 15 mm cement plaster on rough side of single or half brick wall of cement of mix 1:4 (1 cement : 4 coarse sand)
M&L for brick on edge flooring with bricks of class designation 75 including cement slurry etc.complete in cement mortar with F.P.S bricks in cm 1:6
M&L for 52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 and top layer 12 mm thick cement hardener consisting of mix 1:2 by volume hardening compound is mixed @ 2 litre per 50 kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete
Providing and fixing of kota stone 25 mm thick slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required
Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
Steel work in built up tubular round sections for truss and wall cladding including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.with hot finished seamless type tubes.
Providing and fixing of PPGI profile Sheet of 0.50mm (+0.05%) total coated thickness with zinc coating 120 gm per sqm in 240 mpa steel grade, 5-7 microns epoxy primer on both sides of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scrateches during transportation and should be supplied single length upto 12m or as desired by Engineer - In - Charge . The sheets should be fixed using self drilling/ self tapping screws of size 5.5x55mm with EPDM seal, complete to the existing truss and purlins etc complete
Providing and fixing PPGI sheet ridges or hips of width (500- 600mm) overall width plain sheet of 0.50 mm (+0.05%) total thickness , zinc coating fixed 120grms per sqm as per IS :277 using self drilling or self tapping screws complete
Providing and laying for RCC work in lintel beams and Cooking platform with concrete mix (1:11/2:3) with graded 20mm stone aggregates, excluding the cost of reinforcement and centering, shuttering etc complete)
Providing and fixing in position of reinforcement (TMT bar), incl cutting to length, bent to shape requirered including crancking, bending etc complete
Centering and shuttering incl struting, propping etc and removal of form for slab
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.(Granite of any colour and shade, Area of slab over 0.50 sqm)
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc as required in door frame and guard bars
Providing and fixing 35mm thick factory made laminated flush door shutters decorative type, core of block boards construction with frame of 1st class hard wood including stainless steel butt hinges with screws etc complete
Providing and fixing of mosquito proof shutters using galvanized MS wire gauge of average width of aperature 1.4mm in both directions with wire of dia 0.63mm for door of 35mm with 2nd class teak wood
Providing and fixing aluminium handles of size : 100 mm, transparent or dyed to required colour or shade, with necessary screws etc. complete
Providing and fixing aluminium tower bolts of size : 100x10 mm with necessary screws etc. Complete
Supply and fixing aluminum sliding door bolts, transparent or dyed to required colour or shade, with nuts and screws etc complete of size 250x16mm
Providing and making plinth protection 50 mm thick of cement concrete (1:3:6) with stone aggr 20 mm nominal size) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including finishing the top smooth
M& L for half brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in plinth level in Cement mortar 1:4 (1 cement : 4 coarse sand)
Providing and laying 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix 1:4 (1 cement : 4 fine sand)
Providing and laying in position cement concrete of 1:3:6 with 20 mm graded stone aggregates including centering and shuttering etc complete in drain
Providing and finishing with two or more coats applied @ 1.43 ltr/10 Sqm over existing cement paint surface Premium Acrylic smooth exterior paint with silicon additives of required shade including removing of old water proofing cement paint by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc complete
Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.(Two coats)
Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer , over the plastered wall surface to prepare the surface even and smooth complete
Providing and painting two or more coats with synthetic enamel paint of approved brand and manufacture to give an even shade
Providing and fixing fly proof wire gauge to windows, doors and ventilators with MS flat 15x3mm and nuts & bolts complete of 0.63mm dia wire and 1.4 aperture on both sides
M/L for earth work in excavation in trenches n exc 1.5m deep and wide and getting out in soft soil
Providing and laying in position PCC (1:2:4) mix using 40 mm graded stone aggregates in foundation trenches
Structural steel work riveted, bolted or welded in built up sections and frame work etc incl cutting, hoisting, fixing in position and applying a primer coat of steel primer all complete with hot finished welded type tubes
Painting on steel surface with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade on new work (two or more coats) including a coat of approved steel primer
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 15 mm dia pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. (External wk)
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 20 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. (External work
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes 40 mm nominal outer dia Pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. (External work
Providing and fixing on wall unplasticised rigid PVC pipes incl jointing with seal ring, single socketed pipes of 75 mm dia
Providing and fixing of 15mm nominal bore CP bib cock of approved quality
Providing and fixing stainless steel A ISI 304 (18/8) kitchen sink with drain board of size :510x1040 mm bowl depth 250 mm with C.I. Brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required
Providing and fixing 32 mm dia flexible P.V.C waste pipe for sink or wash basin including P.V.C waste fittings complete
M/S. HOP ENTERPRISES
aarav enterprises
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .