CA No. CWE BLY/GE(W)/29 OF 2021-2022 PROVN OF BOUNDARY WALL JOINING BADAUN JN TO BADAUN ROAD UNDER GE (WEST) BAREILLY

Amount

Excavating in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in soft/loose soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified and directed.

Removing surplus excavated material (soils) to distance n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

M & L for PCC 1:4:8, Type D2 (using 40mm graded stone aggregates) as in foundations, filling and mass concrete complete all as specified and directed

M & L for TMT bars of 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for TMT bars of 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed .

M & L for TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed

M & L for use & waste formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work for rough finished flat surfaces of concrete complete all as specified and directed

M & L for use & waste formwork to sides of pillars, posts, struts, piers, columns & stanchions for rough finished square, rectangular or polygonal surfaces of concrete complete all as specified and directed

M & L for RCC M-25, design mix (using 20mm graded aggregates) as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete complete all as specified and directed

M & L for RCC M-25, design mix (using 20mm graded aggregates) as in columns, pillars, piers, posts and struts complete all as specified and directed

M & L for PCC M-15, 1:2:4 mix, (using 20mm graded aggregates) as in lintels upto 1.50m span , seismic & other bonds, coping and the like including weathering, slightly rounded or chamfered angles and throating as directed including necessary use & waste of formwork complete complete all as specified and directed.

M & L for brickwork with old size fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed

M & L for 15 mm thick rendering in cement mortar 1:4 on fair faces brick wall or concrete surfaces including finishing the surfaces even and fair complete all as specified and directed

-Ditto- all as per item No 14.00 above but on other than fair faces of brickwork complete all as specified and directed

M & L for applying two coats of cement based paint on wall surfaces over a coat of cement wash including preparing of undecorated surfaces complete all as specified and directed.

S & F rolled mild steel framed work as in doors or gates of angle or other sections with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, quality conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M & L for granite stone slab (best quality) tiles (any type),12 to15 mm thick, machine cut in skirting/dado laid over 10mm thick backing coat in CM (1:4) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete all as specified and directed.

S & F galvanised, 2 strand, steel barbed wire, 2.24mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. complete all as specified & as directed. (each line wire to be measured)

S & F rolled mild steel work in joist, channel, angle, or tee sections, fixed independently, without connecting plates etc.(cut to ordinary length within 20mm of the length indicated) quality conforming to Fe 410-W (Gde E-250) quality-A complete all as specified and directed.

M&L preparation of new steel surfaces of any description over 10cm width or girth (guide for roller) and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Vasundhra Enterprises

Mohit Enterprises

REHAN CONSTRUCTION

BAKSHI BUILDERS PVT LTD