RENOVATION OF JACKAL NIGHT SHELTER

Amount

PART - A - NIGHT SHELTER

Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS20B for foundation

Supply and filling M-sand in foundation

Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation

Random Rubble Masonry with cement mortafor 1:5 for foundation and basement

Rodent Proof on foundation up to Plinth + Half of the Above RR

Supply and erection of steel centering for plane surface of plinth Beams,column,roof beam, slab

Supplying, fabricating and placing in position of MS/RTS roads for RCC plinth beam

Supplying the MS/RTS roads for Grills

Suppling Mild Steel L Angle size50x50x6mm

Supplying Mild Steel Flat Bar size 50x6mm

Supplying and fixing SS Rods, Frames for Grills

labour Charge for Fixing Rods,L angel and Flat bars

Supply of Chain Link - 1” x 1” using 10 Gauge Galvanised Iron Wire (of all sizes)

Labour Charge for fixing of Chain Link

Reinforced cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for plinth beam

Refilling of M sand

Solid block masonry in cement mortar 1:5 using solid concrete block of 40x20x20cm size. (Solid Block 1:3:6), using 6mm granite chips.

Plastering CM 1:5 12 mm thick for flooring surface

Colour washing two coats Shell lime using

Finishing the top of roof with on course of machine pressed tiles ( 23 cmx23cmx20mm) in cement mortar1:3 (one cement and three sand)12mm thick with crude oil 10 %by weight of cement used and pointed neatly with the same oiled mortar.

Painting two coats with ready mixed paint of approved brand and colour over one primer on new iron work

Supply and fixing 60x60x4mm SS Equal Angle 304

Supply and fixing 50x50x4mm SS Equal Angle 304

Supply and fixing of 20 mm dia SS 304

Railing wheel

SS Shutter guide channel 75x40x4.8

Providing and fixing of polyurethane foam for Sloped roof as thermal insulation panels 50mm thickness along with necessary flashings such as L flashing, C flashing etc& accessories such as screws, fastners, sealants etc for fixing the panel etc., complete complying with standard specification.

Plain cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for Drain

Crystal glass LED Tube light fitting

PVC Pipe

Supplying and fixing in position best quality approved make of Jaquar or equivalent under counter oval type wash hand basin of size 560 x 450mm with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position 15mm dia following taps made of Jaquar or equivalent (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) Swan neck tap

Angle cock

PART - B - MOAT WALL

Dismantling PCC in old structure

Engaging Mazdoor Category-I class Mazdoor for collection and stacking the random rubble masonry

Earth work excavating and depositing on bank with initial lead of 10mt. And initial lift of 2mts in hard stiff clay, stiff block cotton hard red earth and earth mixed with small size boulders and hard gravelly soil SS20B for foundation

Supply and filling M-sand in foundation

Providing Plain cement concrete 1:4 :8 using 40mm metal jelly for foundation

Supply and erection of steel centering for plane surface of plinth Beams

supplying, fabricating and placing in position of MS/RTS roads for RCC plinth beam

Reinforced cement concrete 1:2:4 using 20mm size hard broken stone excluding cost of reinforcement and centering charges asper standard specification for plinth beam

Random Rubble Masonry with cement mortafor 1:5 for foundation and basement

Random Rubble Masonry with cement mortafor 1:5 for foundation and basement using 80% of Departmental material

RCC 1:2:4 for coping

Painting one coat for old iron works

12mm Toughened Glazing (saint goblin) Glass size (5mx1.5m)