PROVN OF 01 X OPEN COVERED SHED SIZE 50 FEET X 20 FEET DIMENSION ON A RAISED PCC PLATFORM 3 FEET HEIGHT AND OVERHEAD ROOF OF PRECOATED SHEETS PPG SUPPORTED ON IRON STEEL STRUCTURE AT HQ RTG ZONE B AND J AND PARKING SHED FOR MT VEHS IN J AND B SUB ARE

Amount

Excavation of post hole (or similar holes)each not exc0.50 cum in soft /loose soil ,getting out ,returing filling in and raming earth or broken ruble mixed with earth around in layers not exceeding 25 cm ,watering,and removing surpl soil to adistence n. exc50 m and making good suraface complete all as specified and directed.

M & L for plain cement concrete, (1:3:6) Type C2 (using 40 mm graded stone aggregate) as in foundation, Plinth filling and mass concrete complete all as specified and directed.

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

M & L for Hardcore of gauge exc. 63 mm but not exc. 100 mm, deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using bricks complete all as specified and directed.

M&L 100mm thick Cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base etc finsihed even & fair complete all as specified and directed

M&L for 25mm thick PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in floor etc finished fair & even all as specified and directed by Engineer-in-charge,laid in alt bays.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes finished even and rough complete all as specified and directed.

M & L for 20 - 25 mm thick machine cut Kota stone slab as in flooring over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding to exposed edges and polishing in granite finish complete all as specified and directed.

M&L 40 mm thick PCC 1:2:4 type B0 using 12.50 mm graded stone aggregate as in flooring finishing cement concrete surface even and smooth

M&L for Pre painted galvalume sheet aluminium zinc coating GI based corrugated steel sheet with curved type 0.5 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /ridge/cladding to wall fixed with self tapping screws as specified. complete all as specified and directed.

S&F for hollow rolled mild steel structure steel work in tubular square/rectangular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS, 1161-1979 grade St-240 complete all as specified and as directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe-410-W(Gde-E-250) quality-B

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M&L PCC 1:4:8 type-D2 (40mm graded stone aggregate) as in foundations, filling and mass concrete.sub base as in floors. complete all as specified and directed.

M & L for brick work with sub class `B' brick (Old size) straight or curved on plan exc 6m mean radius in cement mortar (1:6) complete all as specified & directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Providing, cement concreteType B0 1:2:4 (12.5mm graded stone aggregate) in copings, and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M&L for rendering 15mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even & smooth without using extra cement Complete.

M&L for applying two coat of cement base paint on plastered wall surfaces over a coat of primer incl preparation of surfaces etc complete as all specified.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

M&L for Machine pressed precast colour reflective PCC interlocking paver block 80mm thick mixed with grey cement and pigment, laid dry and bedded on sand cushion complete all as specified and directed the pattern of paver block shall be approved by GE. Note: Payment of sand cushion shall be measured and paid separately.

M & L for sand filling under floors or in foundations including watering and consolidation as required complete all as specified and directed.

M/S SAMRAT TRADING AGENCY

M/S Priya Trading Agency

RAJ AND SONS

HARINANDAN RAI SONS

Vijay Bakshi and Son

SINHA CONSTRUCTION

M/S ANAND MOHAN ENTERPRISES